#pragma section-numbers off

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

[[TableOfContents()]]

== deleuze ==
 * Location: Peer1
 * Model: Dell PowerEdge 2850
 * Processor: 2 x 2.8 GHz Intel Xeo
 * RAM: 4 GB
 * Disks:
  * 4 x 10K Seagate Cheetah SCSI drives, 73GB  '''and'''
  * 2 x 10K Seagate Cheetah SCSI drives, 36GB
 * Extra: RAID kit, with battery, etc.,  256 MB RAID cache, 2 power supplies
 * OS: Debian stable
 * User logins: no
 * Source: donation by Justin Leitgeb

 * [https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp Maintenance Manual for the PE 2850]

'''Use:  fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.'''

== mire ==

 * Location: Peer1
 * Model: Sun Fire v20z
 * Processor: 1 x 1.6GHz AMD64 (Opteron)
 * RAM: 5 GB (initial 2x512MB and additional 2x2GB)
 * Disks: 2 x 36 GB Ultra320 SCSI (hot swap)
 * 1U
 * Ultra 320 SCSI controller embedded in mainboard
 * OS: Debian stable
 * User logins: yes
 * Source: donated by Ray Racine

 * [http://onesearch.sun.com/search/docs/index.jsp?col=docs_en&locale=en&qt=Sun+Fire+v20z Search Sun for Product Documentation, including Maintenance and Troubleshooting Manuals for Sun Fire v20z]
 * http://docs.sun.com/source/817-5248-20/index.html
 * http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg

'''Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)'''

== krunk ==

 * Location: Peer1
 * Model: Sun Netra
 * Processor:
 * RAM:
 * Disks:
  * 2 x 200GB Unknown RPM and Manufacturer
 * OS: Debian stable?
 * User logins: no
 * Source: donation by Adam Megacz

 * KrunkInfoz

'''Use: secondary KDC and AFS server'''

== baltar ==

 * Location: Peer1
 * Nortel Baystack 380 switch
 * Input current: 1.5A to 100 AC
 * Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
 * Power consumption: 150 W
 * Thermal rating: 1000 BTU/hr maximum

 * Source: donation by ShaunEmpie

 * [http://vpit.net/es380-guide.pdf ES380 Guide]

== kvm ==

 * Location: Peer1
 * Model: StarTech IP KVM
 * Source: Newegg?

 * [http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US StarTech manual].

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

== Standard KVM ==

We have a standard KVM to allow remote switching between servers as maintenance requires.

== outpost ==

 * Location: Tech.Coop (hosted at Bytemark, UK)
 * Model: Xen VM
 * Processor: 
 * RAM: 512 MB
 * Disk: 40 GB RAID
 * OS: Debian stable
 * User logins: no

'''Use:  secondary DNS on a different subnet, all tasks requiring remote location.'''


= Awaiting setup =

== xanadu ==

 * Model: Dell PowerEdge 1650
 * Dual P3 1.4GHz 
 * 2G RAM
 * 18GB SCSI HDD
 * Source: donation by NathanKennedy

'''Use: '''



= Awaiting purchase =

There are currently no new systems awaiting purchase.

= Decommissioned =

== abulafia: shell server ==
 * Processor: 1 x 900 MHz
 * RAM: 512 MB
 * Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
 * Extra: 3Ware 6400 PCI ATA RAID controller
'''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.'''