Hopper has an IBM service processor card.  You can access it at

{{{
  https://hopper-sp.hcoop.net/
}}}

The username is "root" and the password is the same as mire's root password (which is also the password for all other service processors).

[[http://en.wikipedia.org/wiki/IBM_Remote_Supervisor_Adapter|Service Processor Information at Wikipedia]]

[[http://www.megacz.com/thoughts/advice/ibm.rsa.html|How to use the RSA remote control without a browser]]

[[attachment:installing-sp.jpeg]]

[[attachment:installing-sp-cable.jpeg]]

== Remote Power On/Off ==

You can use hopper's service processor to power it on and off.  To do so, go to http://hopper-sp.hcoop.net/, log in as user "root" (same password as hopper's root password).  Then click "Power/Restart" on the left hand side.

== Remote Keyboard/Video ==

''This isn't working right now; I havent figured out why --Adam''

You can use hopper's service processor control the keyboard and mouse, independently of our KVM units.  To do so, go to http://hopper-sp.hcoop.net/, log in as user "root" (same password as hopper's root password), and click "Remote Control".  A java applet will open.  I strongly recommend using Firefox; the web interface is pretty ancient and not very browser-compatible.

''''''IMPORTANT: the service processor's remote control functionality uses a proprietary UDP protocol.  Make sure you are not on a network that filters UDP packets (many NATs and corporate firewalls do this).'''''