welcome: please sign in

Diff for "AdminArea"

Differences between revisions 33 and 88 (spanning 55 versions)
⇤ ← Revision 33 as of 2007-02-13 22:35:52 →
Size: 4825
Editor: MichaelOlson
Comment: Add mire todo section
← Revision 88 as of 2007-10-08 05:15:43 → ⇥
Size: 6753
Editor: MichaelOlson
Comment: Add IpListing page, yet to be made
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
= Final preparations =

See page NewServersSetup/FinalPreparations.
Line 8: Line 12:
 * BackupInfo: Information on how to recover deleted files from our off-site backups.
Line 10: Line 15:
 * IpListing: Listing of IPs that we use (nonpublic).
Line 14: Line 20:
 * OnSiteStuff: Checklist for the next on-site visit to the new machines.
 * OneTimeCosts2007: Costs associated with the new servers through April 2007
 * HcoopAddresses: Physical addresses relevant to us
Line 19: Line 28:
= Global TODO = = To-do list =
Line 21: Line 30:
 * Make ca@hcoop.net e-mail address working. It's the address that will be used in the certificate files.
 * Migrate ejabberd mnesia db just before the dns switchover.		 These items should probably be in Bugzilla instead now.

== During migration ==

 * Unclaimed
   * Watchdog process to kill resource hogs
   * Fix resolv.conf on both servers to have multiple good DNS servers for now, set it to use localhost once BIND is running and configured.
   * Figure out how to use Dell OMSA or other tools to monitor RAID and other hardware.
   * Migrate ejabberd mnesia db just before the dns switchover.
   * Set up back-up regime, possibly using [http://rsync.net/ rsync.net].
   * Get miscellaneous web stuff ported, like membership application, vmail password change, publicly-viewable statistics on membership, bandwidth usage stats, ....
   * Do performance testing on the new configuration, by having admins or other users monitor performance on mire (using vmstat, top, mytop, etc) and having one or more (perhaps multi-threaded) scripts requesting web pages from somewhere off of the Peer 1 network.
 * ntk
   * Mailman
     * (Status) The exim side of things has been mostly set up. I think I migrated the non-exim stuff as well, but will need to double-check. --MichaelOlson
     * Migrate lists.
     * Reboot mire while on-site to watch for slow boot issues that should be resolved with recent changes
 * mwolson
   * Run simple tests on cron to see if it works.
 * AdamMegacz
   * Setup Sun Netra ("Krunk") to be secondary KDC+AFS server
Line 27: Line 55:
 * To connect to hcoop's ldap server using ''gq'', create a SSH tunnel: ''' ssh -p 2222 -f -N -L 389:localhost:389 USERNAME@69.90.123.67''', and then connect to ''localhost:389'' in ''gq''.  * To connect to hcoop's ldap server using ''gq'', create a SSH tunnel: ''' ssh -f -N -L 389:localhost:389 USERNAME@deleuze.hcoop.net''', and then connect to ''localhost:389'' in ''gq''.
Line 30: Line 58:
= Deleuze = = Tasks done =

== Deleuze ==
Line 33: Line 63:

== Tasks done ==
Line 55: Line 83:
 * Configure exim4. --MichaelOlson
 * Configure Courier IMAP daemons, reviewing fyodor's config. --MichaelOlson
 * Migrate squirrelmail configuration settings from fyodor.
 * Configure Squirrel``Mail to use imapproxyd, which should give speed improvements once we migrate to deleuze. --MichaelOlson
 * Exim filters
    * (a method has been set up by MichaelOlson, but it needs testing).
 * DNS server
    * Works on deleuze, although I will test once more domains have been migrated for reasonable domain defaults --JustinLeitgeb
 * nscd process for name caching
    * Currently this processes is set to do hostname caching on deleuze, so bind will not be set up as a caching name server --JustinLeitgeb
 * Get exim working on mire --MichaelOlson
 * Upgrade deleuze to debian etch --MichaelOlson
 * Install denyhosts on both deleuze and mire, needs debian etch --MichaelOlson
 * Switch ssh on deleuze to listen to port 22, needs denyhosts --MichaelOlson
 * Perform testing on procmail and exim filter on deleuze. --MichaelOlson
 * Make ca@hcoop.net e-mail address working. It's the address that will be used in the certificate files. --MichaelOlson
 * Make sure somebody is reading mail sent to abuse@hcoop.net so we don't wind up on lame DNSBLs.
 * Review apache configuration on mire. --MichaelOlson
 * Make /afs/hcoop.net/common/etc/scripts/apache-sync-logs work. --Megacz
Line 56: Line 103:
== TODO == == Mire ==
Line 58: Line 105:
In order of implementation (soonest first):  * Installed new second SCSI hard drive, reinstalled debian, and configured the drives with software RAID-1. --NathanKennedy
 * Configured Mire to work as a proper krb/ldap/afs client machine. --DavorOcelic
Line 60: Line 108:
 * Fix resolv.conf on both servers to have multiple good DNS servers for now, set it to use localhost once BIND is running and configured.
 * Get domtool2 working (this to be done concurrent with mire).
 * Figure out how to use Dell OMSA or other tools to monitor RAID and other hardware.
 * Configure exim4. --MichaelOlson
 * Configure courier IMAP daemons, reviewing fyodor's config. --MichaelOlson
 * Configure squirrelmail to use imapproxyd, which should give speed improvements once we migrate to deleuze. --MichaelOlson		 == Krunk ==
Line 69: Line 112:
 * DomtoolTwo (Adam, will it be possible to change/modify support requests from the command line? Also, it would be so "candy" if the messages regarding ticket status were sent as followups to the original request email, not as completely separate mails). -- DavorOcelic  * DomtoolTwo
Line 72: Line 115:
 * Watchdog process to kill resource hogs

These are my responsibility. Right now, I'm waiting for the more traditional stuff to be set up and stable before beginning. --AdamChlipala

= Mire =
== Tasks done ==
 * Installed new second SCSI hard drive, reinstalled debian, and configured the drives with software RAID-1. --NathanKennedy
 * Configured Mire to work as a proper krb/ldap/afs client machine. --DavorOcelic

== TODO ==
 * Configure Exim to use deleuze as a smarthost. --MichaelOlson

1. Introduction

TableOfContents

2. Final preparations

See page NewServersSetup/FinalPreparations.

3. Special topic pages about migration and new set-up

The following are outdated:

4. To-do list

These items should probably be in Bugzilla instead now.

4.1. During migration

  • Unclaimed
    • Watchdog process to kill resource hogs
    • Fix resolv.conf on both servers to have multiple good DNS servers for now, set it to use localhost once BIND is running and configured.
    • Figure out how to use Dell OMSA or other tools to monitor RAID and other hardware.
    • Migrate ejabberd mnesia db just before the dns switchover.

    • Set up back-up regime, possibly using [http://rsync.net/ rsync.net].

    • Get miscellaneous web stuff ported, like membership application, vmail password change, publicly-viewable statistics on membership, bandwidth usage stats, ....
    • Do performance testing on the new configuration, by having admins or other users monitor performance on mire (using vmstat, top, mytop, etc) and having one or more (perhaps multi-threaded) scripts requesting web pages from somewhere off of the Peer 1 network.
  • ntk
    • Mailman

      • (Status) The exim side of things has been mostly set up. I think I migrated the non-exim stuff as well, but will need to double-check. --MichaelOlson

      • Migrate lists.
      • Reboot mire while on-site to watch for slow boot issues that should be resolved with recent changes
  • mwolson
    • Run simple tests on cron to see if it works.

  • AdamMegacz

    • Setup Sun Netra ("Krunk") to be secondary KDC+AFS server

5. Global Notes

  • To edit LDAP database from a GUI tool, use gq program

  • To connect to hcoop's ldap server using gq, create a SSH tunnel: ssh -f -N -L 389:localhost:389 USERNAME@deleuze.hcoop.net, and then connect to localhost:389 in gq.

  • For the description of the actual authentication scheme, see AuthenticationScheme.

6. Tasks done

6.1. Deleuze

This machine donated by Justin Leitgeb seems real nice. Buffered disk throughput is about 1.5 GB/s. Raw disk reads are 60 MB/s for the two 36 GB disks and 120 MB/s for the 4-disk array. Not bad at all.

  • Removed excessive packages, cleaned up the system

  • Installed changetrack to monitor all config file changes. The program uses rcs and automatically keeps previous revisions. It is ran from cron on a daily basis.

  • Installed debsums to monitor file md5sums

  • Installed Courier IMAP and IMAP-SSL

  • Installed LDAP for user authentication. The system is currently configured to use LDAP and fallback to the usual /etc/ files. Admin users will be added locally on all machines and will be able to log in even when LDAP is not operational.

  • Installed MIT Kerberos 5

  • Fixed date/time on the system. Installed ntpd

  • Installed TLS support for LDAP. Certificate file is /etc/ldap/server.pem, and ldap/ldaps ports are 389/636.

  • Installed Linux 2.6.18.3-grsec with 2.6.18-mm3 patches (2) for megaraid.

    • The patches and source tree installed, along with the .deb generated, is under /usr/src/ntk2. I set up sockets groups as on fyodor (7070-7072). SMP, with hyperthreading enhancements, is enabled. I also installed a bunch of packages that someone were uninstalled while I was gone (e.g., gcc). I also fixed the sudoers, wheel group, and admin home directories. --NathanKennedy

  • Kerberos + LDAP works.

  • Compiled requisite kernel modules, compiled and installed new OpenIPMI package, and installed dellomsa. Dell OMSA is now working. --NathanKennedy

  • Install SSH.
  • Permit new admins to log in by copying their SSH keys to their newly-created (empty) home directories.

  • Install AFS (need to repeat the reading on AFS and how it really works. Also it will influence the decision how to format /dev/sdb in the system) -- DavorOcelic

  • Install MySQL and PostgreSQL (input from AFS step and admin discussion needed to see how to exactly configure this).
  • Install BIND.

  • Install and configure Apache, to serve static web content only. --MichaelOlson

  • Review kernel configuration and install testnet. -- DavorOcelic

  • Configure exim4. --MichaelOlson

  • Configure Courier IMAP daemons, reviewing fyodor's config. --MichaelOlson

  • Migrate squirrelmail configuration settings from fyodor.

  • Configure SquirrelMail to use imapproxyd, which should give speed improvements once we migrate to deleuze. --MichaelOlson

  • Exim filters

    • (a method has been set up by MichaelOlson, but it needs testing).

  • DNS server

    • Works on deleuze, although I will test once more domains have been migrated for reasonable domain defaults --JustinLeitgeb

  • nscd process for name caching

    • Currently this processes is set to do hostname caching on deleuze, so bind will not be set up as a caching name server --JustinLeitgeb

  • Get exim working on mire --MichaelOlson

  • Upgrade deleuze to debian etch --MichaelOlson

  • Install denyhosts on both deleuze and mire, needs debian etch --MichaelOlson

  • Switch ssh on deleuze to listen to port 22, needs denyhosts --MichaelOlson

  • Perform testing on procmail and exim filter on deleuze. --MichaelOlson

  • Make ca@hcoop.net e-mail address working. It's the address that will be used in the certificate files. --MichaelOlson

  • Make sure somebody is reading mail sent to abuse@hcoop.net so we don't wind up on lame DNSBLs.

  • Review apache configuration on mire. --MichaelOlson

  • Make /afs/hcoop.net/common/etc/scripts/apache-sync-logs work. --Megacz

6.2. Mire

  • Installed new second SCSI hard drive, reinstalled debian, and configured the drives with software RAID-1. --NathanKennedy

  • Configured Mire to work as a proper krb/ldap/afs client machine. --DavorOcelic

6.3. Krunk

7. Custom software

AdminArea (last edited 2020-08-23 22:16:03 by ClintonEbadi)