welcome: please sign in

Diff for "AdminArea"

Differences between revisions 6 and 60 (spanning 54 versions)
⇤ ← Revision 6 as of 2006-11-27 14:22:29 →
Size: 4027
Editor: NathanKennedy
Comment:
← Revision 60 as of 2007-03-24 08:12:59 → ⇥
Size: 5499
Editor: dhcp-37-80
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= Deleuze = = Introduction =

[[TableOfContents]]

= Special topic pages about migration and new set-up =

 * AndrewFileSystem: Using our new shared filesystem
 * DaemonAdmin: Daemon-specific pages aimed at admins
 * DomTool: Administering and using the new domtool
 * NewSystemHardware: Information on the new hardware
 * TaskDistribution: What each sysadmin is responsible for
 * SoftwareArchitecturePlans: Plans for software installation
 * SystemArchitecturePlans: Plans regarding our hardware

The following are outdated:

 * ColocationNextSteps: Listing of things to do after getting the hardware.

= To-do list =

== Before beginning to migrate members ==

 * Mailman
 * DNS server daemon
 * Apache Dynamic Content. Our ''viable'' options are:
       1. Have domtool support Apache13; use mod_waklog
             * less than 40 lines of code need to be changed in the Apache20 module to do this
       1. Support only CGI (no PHP, suexec) and use kstart to wrap each CGI process
       1. Write our own versions of suexec and the suexecified-php (whatever it's called)
             * reliability/security/maintainability concerns

=== Misc ===
 * Make ca@hcoop.net e-mail address working. It's the address that will be used in the certificate files.
 * Fix resolv.conf on both servers to have multiple good DNS servers for now, set it to use localhost once BIND is running and configured.
 * Figure out how to use Dell OMSA or other tools to monitor RAID and other hardware.
 * Configure Exim on mire to use deleuze as a smarthost. --MichaelOlson
 * Do performance testing on the new configuration, by having admins or other users monitor performance on mire (using vmstat, top, mytop, etc) and having one or more (perhaps multi-threaded) scripts requesting web pages from somewhere off of the Peer 1 network.

== During migration ==

 * Watchdog process to kill resource hogs
 * Migrate ejabberd mnesia db just before the dns switchover.
 * Set up back-up regime, possibly using [http://rsync.net/ rsync.net].
 * Get miscellaneous web stuff ported, like membership application, vmail password change, publicly-viewable statistics on membership, bandwidth usage stats, ....

= Global Notes =

 * To edit LDAP database from a GUI tool, use ''gq'' program
 * To connect to hcoop's ldap server using ''gq'', create a SSH tunnel: ''' ssh -p 2222 -f -N -L 389:localhost:389 USERNAME@69.90.123.67''', and then connect to ''localhost:389'' in ''gq''.
 * For the description of the actual authentication scheme, see AuthenticationScheme.

= Tasks done =

== Deleuze ==
Line 4: Line 57:

== Tasks done ==
Line 17: Line 68:
 * Kerberos works.  * Kerberos + LDAP works.
Line 19: Line 70:
 * Install SSH.
 * Permit new admins to log in by copying their SSH keys to their newly-created (empty) home directories.
 * Install AFS (need to repeat the reading on AFS and how it really works. Also it will influence the decision how to format ''/dev/sdb'' in the system) -- DavorOcelic
 * Install MySQL and PostgreSQL (input from AFS step and admin discussion needed to see how to exactly configure this).
 * Install BIND.
 * Install and configure Apache, to serve static web content only. --MichaelOlson
 * Review kernel configuration and install testnet. -- DavorOcelic
 * Configure exim4. --MichaelOlson
 * Configure Courier IMAP daemons, reviewing fyodor's config. --MichaelOlson
 * Migrate squirrelmail configuration settings from fyodor.
 * Configure Squirrel``Mail to use imapproxyd, which should give speed improvements once we migrate to deleuze. --MichaelOlson
 * Exim filters
    * (a method has been set up by MichaelOlson, but it needs testing).
Line 20: Line 84:
== TODO == = Mire =
Line 22: Line 86:
In order of implementation (soonest first):

 * LDAP working with kerberos. Documentation on this is lacking. -- DavorOcelic
 * Fix resolv.conf on both servers to have multiple good DNS servers for now, set it to use localhost once BIND is running and configured.
 * Install AFS (need to repeat the reading on AFS and how it really works. Also it will influence the decision how to format ''/dev/sdb'' in the system) -- DavorOcelic
 * Install MySQL and PostgreSQL (input from AFS step and admin discussion needed to see how to exactly configure this) -- DavorOcelic
 * Install BIND -- DavorOcelic
 * Review kernel configuration and install testnet. -- DavorOcelic
 * Install and configure Apache, to serve static web content only.
 * Get domtool2 working (this to be done concurrent with mire).
 * Figure out how to use Dell OMSA or other tools to monitor RAID and other hardware.

== Problems ==

 * With ''debsums'', once you break md5sum of a config file, the file keeps being reported as mismatching even if you completely regenerate md5sums for a package!! -- DavorOcelic
 * The logical volume for /dev/sdb is supposed to be a 4-drive raid array, each drive ~73GB. Right now it seems to be configured as RAID1 mirroring the two drives, for a capacity of ~146G (see dmesg, for instance). This would be faster and the volume would be 73G bigger if it was set up as RAID5. I might need to do this from console, and I need to talk to Justin about it, since he set up the logical volumes and I thought he said that sdb was RAID5. --NathanKennedy
  * Spoke to Justin about this. Nonproblem--it is RAID10 and intended to be so. I will let admins decide the merits of RAID5 vs. RAID10. --NathanKennedy		  * Installed new second SCSI hard drive, reinstalled debian, and configured the drives with software RAID-1. --NathanKennedy
 * Configured Mire to work as a proper krb/ldap/afs client machine. --DavorOcelic
Line 45: Line 94:
 * Watchdog process to kill resource hogs

These are my responsibility. Right now, I'm waiting for the more traditional stuff to be set up and stable before beginning. --AdamChlipala


= Global TODO =

 * Make ca@hcoop.net e-mail address working. It's the address used in the certificate files.

= Global Notes =

 * To edit LDAP database from a GUI tool, use ''gq'' program
 * To connect to hcoop's ldap server using ''gq'', create a SSH tunnel: ''' ssh -p 2222 -f -N -L 389:localhost:389 USERNAME@69.90.123.51''', and then connect to ''localhost:389'' in ''gq''.

1. Introduction

TableOfContents

2. Special topic pages about migration and new set-up

The following are outdated:

3. To-do list

3.1. Before beginning to migrate members

  • Mailman
  • DNS server daemon

  • Apache Dynamic Content. Our viable options are:

    1. Have domtool support Apache13; use mod_waklog
      • less than 40 lines of code need to be changed in the Apache20 module to do this
    2. Support only CGI (no PHP, suexec) and use kstart to wrap each CGI process
    3. Write our own versions of suexec and the suexecified-php (whatever it's called)
      • reliability/security/maintainability concerns

3.1.1. Misc

  • Make ca@hcoop.net e-mail address working. It's the address that will be used in the certificate files.

  • Fix resolv.conf on both servers to have multiple good DNS servers for now, set it to use localhost once BIND is running and configured.
  • Figure out how to use Dell OMSA or other tools to monitor RAID and other hardware.

  • Configure Exim on mire to use deleuze as a smarthost. --MichaelOlson

  • Do performance testing on the new configuration, by having admins or other users monitor performance on mire (using vmstat, top, mytop, etc) and having one or more (perhaps multi-threaded) scripts requesting web pages from somewhere off of the Peer 1 network.

3.2. During migration

  • Watchdog process to kill resource hogs
  • Migrate ejabberd mnesia db just before the dns switchover.

  • Set up back-up regime, possibly using [http://rsync.net/ rsync.net].

  • Get miscellaneous web stuff ported, like membership application, vmail password change, publicly-viewable statistics on membership, bandwidth usage stats, ....

4. Global Notes

  • To edit LDAP database from a GUI tool, use gq program

  • To connect to hcoop's ldap server using gq, create a SSH tunnel: ssh -p 2222 -f -N -L 389:localhost:389 USERNAME@69.90.123.67, and then connect to localhost:389 in gq.

  • For the description of the actual authentication scheme, see AuthenticationScheme.

5. Tasks done

5.1. Deleuze

This machine donated by Justin Leitgeb seems real nice. Buffered disk throughput is about 1.5 GB/s. Raw disk reads are 60 MB/s for the two 36 GB disks and 120 MB/s for the 4-disk array. Not bad at all.

  • Removed excessive packages, cleaned up the system

  • Installed changetrack to monitor all config file changes. The program uses rcs and automatically keeps previous revisions. It is ran from cron on a daily basis.

  • Installed debsums to monitor file md5sums

  • Installed Courier IMAP and IMAP-SSL

  • Installed LDAP for user authentication. The system is currently configured to use LDAP and fallback to the usual /etc/ files. Admin users will be added locally on all machines and will be able to log in even when LDAP is not operational.

  • Installed MIT Kerberos 5

  • Fixed date/time on the system. Installed ntpd

  • Installed TLS support for LDAP. Certificate file is /etc/ldap/server.pem, and ldap/ldaps ports are 389/636.

  • Installed Linux 2.6.18.3-grsec with 2.6.18-mm3 patches (2) for megaraid.

    • The patches and source tree installed, along with the .deb generated, is under /usr/src/ntk2. I set up sockets groups as on fyodor (7070-7072). SMP, with hyperthreading enhancements, is enabled. I also installed a bunch of packages that someone were uninstalled while I was gone (e.g., gcc). I also fixed the sudoers, wheel group, and admin home directories. --NathanKennedy

  • Kerberos + LDAP works.

  • Compiled requisite kernel modules, compiled and installed new OpenIPMI package, and installed dellomsa. Dell OMSA is now working. --NathanKennedy

  • Install SSH.
  • Permit new admins to log in by copying their SSH keys to their newly-created (empty) home directories.

  • Install AFS (need to repeat the reading on AFS and how it really works. Also it will influence the decision how to format /dev/sdb in the system) -- DavorOcelic

  • Install MySQL and PostgreSQL (input from AFS step and admin discussion needed to see how to exactly configure this).
  • Install BIND.

  • Install and configure Apache, to serve static web content only. --MichaelOlson

  • Review kernel configuration and install testnet. -- DavorOcelic

  • Configure exim4. --MichaelOlson

  • Configure Courier IMAP daemons, reviewing fyodor's config. --MichaelOlson

  • Migrate squirrelmail configuration settings from fyodor.

  • Configure SquirrelMail to use imapproxyd, which should give speed improvements once we migrate to deleuze. --MichaelOlson

  • Exim filters

    • (a method has been set up by MichaelOlson, but it needs testing).

6. Mire

  • Installed new second SCSI hard drive, reinstalled debian, and configured the drives with software RAID-1. --NathanKennedy

  • Configured Mire to work as a proper krb/ldap/afs client machine. --DavorOcelic

7. Custom software

AdminArea (last edited 2020-08-23 22:16:03 by ClintonEbadi)