welcome: please sign in

Diff for "Hardware"

Differences between revisions 10 and 84 (spanning 74 versions)
⇤ ← Revision 10 as of 2006-06-24 22:34:07 →
Size: 3862
Editor: JustinLeitgeb
Comment: Added links to penguin server configurations
← Revision 84 as of 2008-03-10 02:12:44 → ⇥
Size: 4033
Editor: DavorOcelic
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= New System Hardware = #pragma section-numbers off
Line 3: Line 3:
During the HCoop IRC meeting on June 24, 2006, the group decided that it would based it's new system architecture on the following pieces of hardware: This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.
Line 5: Line 5:
 * Two robust servers, one that doesn't allow normal user logins, and one that does.
 * One switch to form a LAN between these servers.
 * One serial port device, to facilitate remote access to our servers.		 [[TableOfContents()]]
Line 9: Line 7:
Also, it was mentioned that we should research hardware support contracts from any vendor that will be selling us equipment. == deleuze ==
 * Location: Peer1
 * Model: Dell PowerEdge 2850
 * Processor: 2 x 2.8 GHz Intel Xeo
 * RAM: 4 GB
 * Disks:
  * 4 x 10K Seagate Cheetah SCSI drives, 73GB '''and'''
  * 2 x 10K Seagate Cheetah SCSI drives, 36GB
 * Extra: RAID kit, with battery, etc., 256 MB RAID cache, 2 power supplies
 * OS: Debian stable
 * User logins: no
 * Source: donation by Justin Leitgeb
Line 11: Line 20:
Additionally, group decided that the server that HCoop currently owns, Abulafia, will be brought to he.net for shell service. This will follow a necessary re-load of the OS software at a time to be determined later.  * [https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp Maintenance Manual for the PE 2850]
Line 13: Line 22:
This page will serve as a forum for collaborative research on the pieces of hardware that we need. '''Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.'''
Line 15: Line 24:
== Servers == == mire ==
Line 17: Line 26:
We will be purchasing two servers, which will be configured and sent to he.net for colocation.  * Location: Peer1
 * Model: Sun Fire v20z
 * Processor: 1 x 1.6GHz AMD64 (Opteron)
 * RAM: 5 GB (initial 2x512MB and additional 2x2GB)
 * Disks: 2 x 36 GB Ultra320 SCSI (hot swap)
 * 1U
 * Ultra 320 SCSI controller embedded in mainboard
 * OS: Debian stable
 * User logins: yes
 * Source: donated by Ray Racine
Line 19: Line 37:
=== Desired Features ===  * [http://onesearch.sun.com/search/docs/index.jsp?col=docs_en&locale=en&qt=Sun+Fire+v20z Search Sun for Product Documentation, including Maintenance and Troubleshooting Manuals for Sun Fire v20z]
 * http://docs.sun.com/source/817-5248-20/index.html
 * http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg
Line 21: Line 41:
These servers should be as redundant as possible. At this point, we cannot afford to have less than one point of failure in many areas, so we should look for the following features in our new servers: '''Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)'''
Line 23: Line 43:
 * Redundant power supplies.
 * Hardware RAID.
 * Dual CPU's, AMD seems to be a stronger option than Intel		 == krunk ==
Line 27: Line 45:
==== Differences Between the Servers ====  * Location: Peer1
 * Model: Sun Netra
 * Processor:
 * RAM:
 * Disks:
  * 2 x 200GB Unknown RPM and Manufacturer
 * OS: Debian stable?
 * User logins: no
 * Source: donation by Adam Megacz
Line 29: Line 55:
The admin-only server will hopefully be serving an AFS file system, which means that fancier kinds of RAID are justified there. The all-members server can get away with cheaper (and maybe even faster) solutions for local disk access.  * KrunkInfoz
Line 31: Line 57:
JustinLeitgeb thinks that perhaps RAID 1 would work on the all-members server, and either RAID 5 or RAID 10 on the admin server. It should be RAID 10 if we can afford it, or RAID 5 if we're shorter on cash. :) '''Use: secondary KDC and AFS server'''
Line 33: Line 59:
There may be other factors influencing different configuration choices between the servers. == baltar ==
Line 35: Line 61:
=== Proposed Models and Vendors ===  * Location: Peer1
 * Nortel Baystack 380 switch
 * Input current: 1.5A to 100 AC
 * Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
 * Power consumption: 150 W
 * Thermal rating: 1000 BTU/hr maximum
Line 37: Line 68:
Vendors:  * Source: donation by ShaunEmpie
Line 39: Line 70:
 * [http://www.penguincomputing.com/index.php?option=com_content&task=view&id=172&Itemid=230 Penguin Computing]
 * [http://www.dell.com/ Dell]
 * [http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=M&Category_Code=allracks Monarch Computer Systems]		  * [http://vpit.net/es380-guide.pdf ES380 Guide]
Line 43: Line 72:
Models: == kvm ==
Line 45: Line 74:
 * [http://www.dell.com/content/products/productdetails.aspx/pedge_1850 Dell PowerEdge 1850]
 * [http://www.penguincomputing.com/index.php?option=com_content&id=123&Itemid=184&task=view Penguin Altus 1400 Server]
 * Possible web server configuration from [http://www.penguincomputing.com Penguin] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_web_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_web_server.pdf (PDF)]
 * Possible admin server configuration from [http://www.penguincomputing.com Penguin] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_server.pdf (PDF)]		  * Location: Peer1
 * Model: StarTech IP KVM
 * Source: Newegg?
Line 50: Line 78:
== Ethernet Switch ==  * [http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US StarTech manual].
Line 52: Line 80:
=== Desired Features === The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.
Line 54: Line 82:
 * Gigabit
 * 5 ports minimum		 == Standard KVM ==
Line 57: Line 84:
=== Proposed Models and Vendors === We have a standard KVM to allow remote switching between servers as maintenance requires.
Line 59: Line 86:
[http://newegg.com/ Newegg] has been recommended to several of us. == outpost ==
Line 61: Line 88:
 * ($56.99) Highly-rated Netgear switch that is not rack-mountable [[http://www.newegg.com/Product/Product.asp?Item=N82E16833122111 link ]]
 * ($249.99) Level One 16-port rack-mountable switch [[http://www.newegg.com/Product/Product.asp?Item=N82E16833118021 link ]]		  * Location: Tech.Coop (hosted at Bytemark, UK)
 * Model: Xen VM
 * Processor:
 * RAM: 512 MB
 * Disk: 40 GB RAID
 * OS: Debian stable
 * User logins: no
Line 64: Line 96:
MichaelOlson thinks that we should go with the Netgear switch. It has been rated as a very reliable product, and is very affordable. '''Use: secondary DNS on a different subnet, all tasks requiring remote location.'''
Line 66: Line 98:
== Serial Port ==
Line 68: Line 99:
Docelic, or other users -- please update this section since I am entirely ignorant about these devices! :) = Awaiting setup =
Line 70: Line 101:
=== Desired Features === == xanadu ==
Line 72: Line 103:
=== Proposed Models and Vendors ===  * Model: Dell PowerEdge 1650
 * Dual P3 1.4GHz
 * 2G RAM
 * 18GB SCSI HDD
 * Source: donation by NathanKennedy
Line 74: Line 109:
[http://www.cyclades.com/ Cyclades] was mentioned as one vendor of serial port devices which are linux-friendly. '''Use: '''

== deleuze ==
 * Location: Peer1
 * Model: IBM xSeries 335
 * Processor: 2 x P4 XEON 2.6Ghz
 * RAM: 2 GB
 * Disks:
  * None
 * OS:
 * User logins: yes
 * Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299

'''Use: .'''


= Awaiting purchase =

There are currently no new systems awaiting purchase.

= Decommissioned =

== abulafia: shell server ==
 * Processor: 1 x 900 MHz
 * RAM: 512 MB
 * Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
 * Extra: 3Ware 6400 PCI ATA RAID controller
'''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.'''

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

TableOfContents()

deleuze

Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.

mire

Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)

krunk

  • Location: Peer1
  • Model: Sun Netra
  • Processor:
  • RAM:
  • Disks:
    • 2 x 200GB Unknown RPM and Manufacturer
  • OS: Debian stable?
  • User logins: no
  • Source: donation by Adam Megacz

  • KrunkInfoz

Use: secondary KDC and AFS server

baltar

  • Location: Peer1
  • Nortel Baystack 380 switch
  • Input current: 1.5A to 100 AC
  • Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
  • Power consumption: 150 W
  • Thermal rating: 1000 BTU/hr maximum

  • Source: donation by ShaunEmpie

  • [http://vpit.net/es380-guide.pdf ES380 Guide]

kvm

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

Standard KVM

We have a standard KVM to allow remote switching between servers as maintenance requires.

outpost

  • Location: Tech.Coop (hosted at Bytemark, UK)
  • Model: Xen VM
  • Processor:
  • RAM: 512 MB
  • Disk: 40 GB RAID
  • OS: Debian stable
  • User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Awaiting setup

xanadu

Use:

deleuze

Use: .

Awaiting purchase

There are currently no new systems awaiting purchase.

Decommissioned

abulafia: shell server

  • Processor: 1 x 900 MHz
  • RAM: 512 MB
  • Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
  • Extra: 3Ware 6400 PCI ATA RAID controller

Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.

Hardware (last edited 2021-04-17 15:58:03 by ClintonEbadi)