welcome: please sign in

Diff for "Hardware"

Differences between revisions 133 and 171 (spanning 38 versions)
⇤ ← Revision 133 as of 2008-12-13 20:47:56 →
Size: 6558
Editor: AdamChlipala
Comment: spam
← Revision 171 as of 2010-02-23 18:30:43 → ⇥
Size: 9142
Editor: ClintonEbadi
Comment: Add link to megarc reference for deleuze raid admin
Deletions are marked like this. Additions are marked like this.
Line 6: Line 6:

= Peer1 =

Current pictures of the actual Peer1 cabinet are at [[http://hcoop.net/~rkd/hcoop/imgs/]], taken during [[http://wiki.hcoop.net/OnSiteVisits/20090821]].


== fritz ==
 * Location: Peer1
 * Model: Dell PowerEdge 2970
 * Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt
 * RAM: 8GB (4x2GB), 800MHz, Dual Ranked
 * 1x6 Backplane for 3.5-inch Hard Drives
 * Integrated SAS/SATA No RAID
 * Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1
 * Redundant Power Supply with Dual Cords
 * Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC
 * Form factor: 2U
 * OS: Debian lenny
 * User logins: no
 * Source: purchase from Dell store, 2x 1 TB disks from Newegg
'''Use: our new main server, awaiting setup.'''
Line 24: Line 45:
 * [[attachment:ut_linux.html|MegaRC RAID Utility Manual]]
Line 25: Line 47:
 * (note: picture above not accurate)
 * Real picture:{{http://hcoop.net/~docelic/deleuze.hcoop.net.jpg}}
Line 55: Line 79:
 * Real picture:{{http://hcoop.net/~docelic/mire.hcoop.net.jpg}}
Line 58: Line 83:
== krunk ==

 * Location: Peer1
 * Model: Sun Netra
 * Processor:
 * RAM:		 == kvm ==

 * Location: Peer1
 * Model: StarTech IP KVM
 * Source: Newegg?

 * [[KvmAccess]]
 * [[http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US|StarTech manual]] ([[http://hcoop.net/~docelic/SV1110IPEXT.pdf|local copy]]).

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.


== hopper ==
 * Location: Peer1
 * Model: IBM xSeries 335
 * Processor: 2 x Dual core P4 XEON 2.6Ghz
   * Is this actually dual-core, or are CPU1/CPU3 just hyperthreaded logical processors? -- ClintonEbadi
 * RAM: 4 GB, 2x1 GB, 1x2 GB (3/4 slots, 8 GB Max, PC2100 ECC registered)
Line 65: Line 102:
  * 2 x 200GB Unknown RPM and Manufacturer
 * Form factor: 1U?
 * OS: Debian stable?
 * User logins: no
 * Source: donation by Adam Megacz

 * KrunkInfoz

'''Use: secondary KDC and AFS server'''		   * 2x SCSI Ultra 320 80 pin. SEAGATE - 5 YEARS MFG WARRANTY. CHEETAH 73.4GB 15000 RPM 80PIN ULTRA320 SCSI HARD DISK DRIVE. 16MB BUFFER 3.5 LOW PROFILE(1.0 INCH). ST373455LC
  * Floppy 3.5"
 * LAN: 2 x 10/100/1000
 * Ports: 3 x USB, 1 x serial, 2 x PCI-X
 * PSU: 1/1
 * Form factor: 1U
 * Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
 * OS:
 * User logins: no
 * Name voting at https://members.hcoop.net/portal/poll?report=17
 * Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299
 * Real picture:{{http://hcoop.net/~docelic/hopper.hcoop.net.jpg}}

 * [[HopperServiceProcessor]]
 * [[http://www-947.ibm.com/systems/support/supportsite.wss/selectproduct?familyind=5105587&typeind=0&osind=0&continue.x=12&continue.y=13&brandind=5000008&oldbrand=5000008&oldfamily=5105587&oldtype=0&taskind=2&matrix=Y&psid=bm|IBM xSeries 335 Support Page]]
 * {{http://hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg}}

[[attachment:Back of hopper, taken 24feb09.jpg]]
[[attachment:Hopper card closeup, taken 24feb09.jpg]]
[[attachment:Inside hopper, taken 24feb09.jpg]]


'''Use: Initially, server was set up by Clinton Ebadi. It's purpose is to serve as a secondary KDC/AFS server instead of Krunk, and an email server (all email processing).'''

(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).



= Tech.coop =

== outpost ==

 * Location: Tech.Coop (hosted at Bytemark, UK)
 * Model: Xen VM
 * Processor:
 * RAM: 512 MB
 * Disk: 40 GB RAID
 * OS: Debian stable
 * User logins: no

'''Use: secondary DNS on a different subnet, all tasks requiring remote location.'''


= Awaiting setup =

None.

= Awaiting purchase =

None. Last acquisition was Dell PowerEdge 2970, Dec 2009.


= Decommissioned =

== abulafia: shell server ==
 * Processor: 1 x 900 MHz
 * RAM: 512 MB
 * Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
 * Extra: 3Ware 6400 PCI ATA RAID controller
'''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted. Due to failing parts the machine was decomissioned completely and is no longer planned for reuse.'''
Line 76: Line 164:
Line 87: Line 174:
Line 91: Line 177:

== kvm ==

 * Location: Peer1
 * Model: StarTech IP KVM
 * Source: Newegg?

 * [[KvmAccess]]
 * [[http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US|StarTech manual]] ([[http://hcoop.net/~docelic/SV1110IPEXT.pdf|local copy]]).

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.


== outpost ==

 * Location: Tech.Coop (hosted at Bytemark, UK)
 * Model: Xen VM
 * Processor:
 * RAM: 512 MB
 * Disk: 40 GB RAID
 * OS: Debian stable
 * User logins: no

'''Use: secondary DNS on a different subnet, all tasks requiring remote location.'''


= Awaiting setup =

== hopper ==
 * Location: Peer1
 * Model: IBM xSeries 335
 * Processor: 2 x P4 XEON 2.6Ghz
 * RAM: 4 GB, 2x1 GB, 1x2 GB (3/4 slots, 8 GB Max, PC2100 ECC registered)
 * Disks:
  * 2x SCSI Ultra 320 80 pin. SEAGATE - 5 YEARS MFG WARRANTY. CHEETAH 73.4GB 15000 RPM 80PIN ULTRA320 SCSI HARD DISK DRIVE. 16MB BUFFER 3.5 LOW PROFILE(1.0 INCH). ST373455LC
  * Floppy 3.5"
 * LAN: 2 x 10/100/1000
 * Ports: 3 x USB, 1 x serial, 2 x PCI-X
 * PSU: 1/1
 * Form factor: 1U
 * Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
 * OS:
 * User logins: no
 * Name voting at https://members.hcoop.net/portal/poll?report=17
 * Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299

 * [[HopperServiceProcessor]]
 * {{http://hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg}}

'''Use: Email server (all email processing).'''

(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).
  * Our switch "Baltar" was replaced by a smaller version in Dec 2008 to free up cabinet space, both for extra airflow and preparation to rack a new machine, to which all email processing will be moved.
Line 147: Line 181:
 * Location: Peer1  * Location: ???
Line 167: Line 201:
'''Use: '''


= Awaiting purchase =

= Decommissioned =

== abulafia: shell server ==
 * Processor: 1 x 900 MHz
 * RAM: 512 MB
 * Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
 * Extra: 3Ware 6400 PCI ATA RAID controller
'''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted. Due to failing parts the machine was decomissioned completely and is no longer planned for reuse.'''		 Removed from rack in December 2008 to make space needed for servicing other machines. Server wasn't able to run with current hardware, and the board determined that it would be more effective to purchase a higher-powered server to fill our rack rather than purchase parts needed to bring Xanadu into operation.

== krunk ==

 * Location: Peer1
 * Model: Sun Netra
 * Processor:
 * RAM:
 * Disks:
  * 2 x 200GB Unknown RPM and Manufacturer
 * Form factor: 1U?
 * OS: Debian stable?
 * User logins: no
 * Source: donation by Adam Megacz
 * KrunkInfoz
 * Real picture: {{http://hcoop.net/~docelic/krunk.hcoop.net.jpg}}

'''Use: was a secondary KDC and AFS server. Decomissioned after it developed problems in the hardware (as we perceived it) network stack. '''

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

Contents

  1. Peer1
    1. fritz
    2. deleuze
    3. mire
    4. kvm
    5. hopper
  2. Tech.coop
    1. outpost
  3. Awaiting setup
  4. Awaiting purchase
  5. Decommissioned
    1. abulafia: shell server
    2. baltar
    3. xanadu
    4. krunk

Peer1

Current pictures of the actual Peer1 cabinet are at http://hcoop.net/~rkd/hcoop/imgs/, taken during http://wiki.hcoop.net/OnSiteVisits/20090821.

fritz

  • Location: Peer1

  • Model: Dell PowerEdge 2970

  • Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt

  • RAM: 8GB (4x2GB), 800MHz, Dual Ranked
  • 1x6 Backplane for 3.5-inch Hard Drives
  • Integrated SAS/SATA No RAID

  • Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1

  • Redundant Power Supply with Dual Cords

  • Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC

  • Form factor: 2U
  • OS: Debian lenny
  • User logins: no
  • Source: purchase from Dell store, 2x 1 TB disks from Newegg

Use: our new main server, awaiting setup.

deleuze

Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.

mire

Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)

kvm

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

hopper

Back of hopper, taken 24feb09.jpg Hopper card closeup, taken 24feb09.jpg Inside hopper, taken 24feb09.jpg

Use: Initially, server was set up by Clinton Ebadi. It's purpose is to serve as a secondary KDC/AFS server instead of Krunk, and an email server (all email processing).

(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).

Tech.coop

outpost

  • Location: Tech.Coop (hosted at Bytemark, UK)
  • Model: Xen VM
  • Processor:
  • RAM: 512 MB
  • Disk: 40 GB RAID
  • OS: Debian stable
  • User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Awaiting setup

None.

Awaiting purchase

None. Last acquisition was Dell PowerEdge 2970, Dec 2009.

Decommissioned

abulafia: shell server

  • Processor: 1 x 900 MHz
  • RAM: 512 MB
  • Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
  • Extra: 3Ware 6400 PCI ATA RAID controller

Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted. Due to failing parts the machine was decomissioned completely and is no longer planned for reuse.

baltar

xanadu

  • Location: ???

  • Model: Dell PowerEdge 1650

  • Processor: Dual P3 1.4GHz (2/2)
  • RAM: 2 GB (?/4 slots, 4 GB Max, 72-bit ECC PC-133 SDRAM )
  • Disks (controller Ultra 160 SCSI):
    • 1 x 18 GB (1/3)
    • Floppy 3.5"
  • LAN: 2 x 10/100/1000
  • Ports: 2 x PCI-X
  • PSU: ?/2
  • Power: 100–240 VAC, 50/60 Hz, 3.9–2.0 A, 275 W (AC) per PSU
  • Form factor: 1U
  • Dimensions: W 19 in / H 1.67 in / D 26.9 in / Weight 35 lbs
  • OS:
  • User logins:

  • Source: donation by NathanKennedy

  • http://support.dell.com/support/edocs/systems/pe1650/en/index.htm

  • http://hcoop.net/~docelic/servidoresdell1650.jpg

Removed from rack in December 2008 to make space needed for servicing other machines. Server wasn't able to run with current hardware, and the board determined that it would be more effective to purchase a higher-powered server to fill our rack rather than purchase parts needed to bring Xanadu into operation.

krunk

  • Location: Peer1
  • Model: Sun Netra
  • Processor:
  • RAM:
  • Disks:
    • 2 x 200GB Unknown RPM and Manufacturer
  • Form factor: 1U?
  • OS: Debian stable?
  • User logins: no
  • Source: donation by Adam Megacz

  • KrunkInfoz

  • Real picture: http://hcoop.net/~docelic/krunk.hcoop.net.jpg

Use: was a secondary KDC and AFS server. Decomissioned after it developed problems in the hardware (as we perceived it) network stack.

Hardware (last edited 2021-04-17 15:58:03 by ClintonEbadi)