|
Size: 281
Comment:
|
Size: 8215
Comment: added link to IBM support page for hopper
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| <a href='http://bldianna.interfree.it/resource-489.html'>lost temple of the aztec</a> <a href="http://bldianna.interfree.it/resource-489.html">aztec sacrificial temple</a> [link=http://bldianna.interfree.it/resource-489.html]picture of aztec temple[/link] ---- CategoryHomepage |
#pragma section-numbers off This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure. <<TableOfContents>> = Peer1 = Current pictures of the actual Peer1 cabinet are at [[http://hcoop.net/~rkd/hcoop/imgs/]], taken during [[http://wiki.hcoop.net/OnSiteVisits/20090821]]. == deleuze == * Location: Peer1 * Model: Dell PowerEdge 2850 * Processor: 2 x 2.8 GHz Intel Xeon (2/2) * RAM: 4 GB (? slots, 16 GB Max, DDR-2400 SDRAM) * Disks (controller Ultra 320 SCSI): * 4 x 10K Seagate Cheetah SCSI drives, 73GB '''and''' * 2 x 10K Seagate Cheetah SCSI drives, 36GB * LAN: 2 x 10/100/1000 * Extra: RAID kit, with battery, etc., 256 MB RAID cache, 2 power supplies * Form factor: 2U * OS: Debian stable * User logins: no * Source: donation by Justin Leitgeb * [[https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp|Maintenance Manual for the PE 2850]] * http://www.dell.com/downloads/global/products/pedge/en/2850_specs.pdf * {{http://hcoop.net/~docelic/dell-poweredge-2850-i1.jpg}} * (note: picture above not accurate) * Real picture:{{http://hcoop.net/~docelic/deleuze.hcoop.net.jpg}} '''Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.''' == mire == * Location: Peer1 * Model: Sun Fire v20z * Processor: 1 x 1.6GHz AMD64 (Opteron) (1/2) * RAM: 5 GB (initial 2x512MB and additional 2x2GB, ? slots, 16 GB Max, DDR1/333 or DDR1/400 SDRAM) * Disks (controller Ultra 320 SCSI): * 2 x 36 GB (hot swap) * CD-Rom * Floppy * LAN: 2 x 10/100/1000 * Form factor: 1U * Ports: 1 x USB 1.1, 1 x DB9 serial, 2 x PCI-X * Power: 100-240 V, 50/60 Hz, 465 W PFC supply, dual redundant fans * Dimensions: W 16.94 in / H 1.69 in / D 28.5 in / Weight 35 lbs * OS: Debian stable * User logins: yes * Source: donated by Ray Racine * [[RebootingMireSp]] * [[http://docs.sun.com/source/817-5248-21/|SunFire v20z User Guide]] * [[http://docs.sun.com/source/817-5249-17/|Service Processor Manual]] * http://docs.sun.com/source/817-5248-20/index.html * http://www.sun.com/servers/entry/v20z/index.jsp * {{http://hcoop.net/~docelic/sunFIRE_V20z.jpg}} * {{http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg}} * {{http://hcoop.net/~docelic/SunFireV20z_expl.gif}} * Real picture:{{http://hcoop.net/~docelic/mire.hcoop.net.jpg}} '''Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)''' == kvm == * Location: Peer1 * Model: StarTech IP KVM * Source: Newegg? * [[KvmAccess]] * [[http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US|StarTech manual]] ([[http://hcoop.net/~docelic/SV1110IPEXT.pdf|local copy]]). The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server. == hopper == * Location: Peer1 * Model: IBM xSeries 335 * Processor: 2 x P4 XEON 2.6Ghz * RAM: 4 GB, 2x1 GB, 1x2 GB (3/4 slots, 8 GB Max, PC2100 ECC registered) * Disks: * 2x SCSI Ultra 320 80 pin. SEAGATE - 5 YEARS MFG WARRANTY. CHEETAH 73.4GB 15000 RPM 80PIN ULTRA320 SCSI HARD DISK DRIVE. 16MB BUFFER 3.5 LOW PROFILE(1.0 INCH). ST373455LC * Floppy 3.5" * LAN: 2 x 10/100/1000 * Ports: 3 x USB, 1 x serial, 2 x PCI-X * PSU: 1/1 * Form factor: 1U * Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs * OS: * User logins: no * Name voting at https://members.hcoop.net/portal/poll?report=17 * Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299 * Real picture:{{http://hcoop.net/~docelic/hopper.hcoop.net.jpg}} * [[HopperServiceProcessor]] * [[http://www-947.ibm.com/systems/support/supportsite.wss/selectproduct?familyind=5105587&typeind=0&osind=0&continue.x=12&continue.y=13&brandind=5000008&oldbrand=5000008&oldfamily=5105587&oldtype=0&taskind=2&matrix=Y&psid=bm|IBM xSeries 335 Support Page]] * {{http://hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg}} [[attachment:Back of hopper, taken 24feb09.jpg]] [[attachment:Hopper card closeup, taken 24feb09.jpg]] [[attachment:Inside hopper, taken 24feb09.jpg]] '''Use: Initially, server was set up by Clinton Ebadi. It's purpose is to serve as a secondary KDC/AFS server instead of Krunk, and an email server (all email processing).''' (The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver). = Tech.coop = == outpost == * Location: Tech.Coop (hosted at Bytemark, UK) * Model: Xen VM * Processor: * RAM: 512 MB * Disk: 40 GB RAID * OS: Debian stable * User logins: no '''Use: secondary DNS on a different subnet, all tasks requiring remote location.''' = Awaiting setup = None. = Awaiting purchase = None. = Decommissioned = == abulafia: shell server == * Processor: 1 x 900 MHz * RAM: 512 MB * Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives) * Extra: 3Ware 6400 PCI ATA RAID controller '''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted. Due to failing parts the machine was decomissioned completely and is no longer planned for reuse.''' == baltar == * Location: Peer1 * Nortel Baystack 380 switch * Fabric: Dual 24-port Gigabit * Memory: 16 MB SDRAM, 32 MB Flash * Input current: 1.5A to 100 AC * Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz * Power consumption: 150 W * Thermal rating: 1000 BTU/hr maximum * Dimensions: W 17.25 in / H 2.77 in / D 12.75 in / Weight 10.60 lbs * Source: donation by ShaunEmpie * http://support.nortel.com/go/main.jsp?cscat=DOCUMENTATION&poid=11941 * [[http://hcoop.net/~docelic/214390a.pdf|214390a.pdf]], [[http://hcoop.net/~docelic/214391a.pdf|214391a.pdf]], [[http://hcoop.net/~docelic/214392a.pdf|214392a.pdf]], [[http://hcoop.net/~docelic/214393a.pdf|214393a.pdf]], [[http://hcoop.net/~docelic/214394a.pdf|214394a.pdf]], [[http://hcoop.net/~docelic/216339a.pdf|216339a.pdf]] * {{http://hcoop.net/~docelic/baystack380gbit.jpg}} * Our switch "Baltar" was replaced by a smaller version in Dec 2008 to free up cabinet space, both for extra airflow and preparation to rack a new machine, to which all email processing will be moved. == xanadu == * Location: ??? * Model: Dell PowerEdge 1650 * Processor: Dual P3 1.4GHz (2/2) * RAM: 2 GB (?/4 slots, 4 GB Max, 72-bit ECC PC-133 SDRAM ) * Disks (controller Ultra 160 SCSI): * 1 x 18 GB (1/3) * Floppy 3.5" * LAN: 2 x 10/100/1000 * Ports: 2 x PCI-X * PSU: ?/2 * Power: 100–240 VAC, 50/60 Hz, 3.9–2.0 A, 275 W (AC) per PSU * Form factor: 1U * Dimensions: W 19 in / H 1.67 in / D 26.9 in / Weight 35 lbs * OS: * User logins: * Source: donation by NathanKennedy * http://support.dell.com/support/edocs/systems/pe1650/en/index.htm * {{http://hcoop.net/~docelic/servidoresdell1650.jpg}} Removed from rack in December 2008 to make space needed for servicing other machines. Server wasn't able to run with current hardware, and the board determined that it would be more effective to purchase a higher-powered server to fill our rack rather than purchase parts needed to bring Xanadu into operation. == krunk == * Location: Peer1 * Model: Sun Netra * Processor: * RAM: * Disks: * 2 x 200GB Unknown RPM and Manufacturer * Form factor: 1U? * OS: Debian stable? * User logins: no * Source: donation by Adam Megacz * KrunkInfoz * Real picture: {{http://hcoop.net/~docelic/krunk.hcoop.net.jpg}} '''Use: was a secondary KDC and AFS server. Decomissioned after it developed problems in the hardware (as we perceived it) network stack. ''' |
This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.
Contents
Peer1
Current pictures of the actual Peer1 cabinet are at http://hcoop.net/~rkd/hcoop/imgs/, taken during http://wiki.hcoop.net/OnSiteVisits/20090821.
deleuze
- Location: Peer1
Model: Dell PowerEdge 2850
- Processor: 2 x 2.8 GHz Intel Xeon (2/2)
- RAM: 4 GB (? slots, 16 GB Max, DDR-2400 SDRAM)
- Disks (controller Ultra 320 SCSI):
4 x 10K Seagate Cheetah SCSI drives, 73GB and
- 2 x 10K Seagate Cheetah SCSI drives, 36GB
- LAN: 2 x 10/100/1000
- Extra: RAID kit, with battery, etc., 256 MB RAID cache, 2 power supplies
- Form factor: 2U
- OS: Debian stable
- User logins: no
- Source: donation by Justin Leitgeb
http://www.dell.com/downloads/global/products/pedge/en/2850_specs.pdf
- (note: picture above not accurate)
Real picture:
Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.
mire
- Location: Peer1
- Model: Sun Fire v20z
- Processor: 1 x 1.6GHz AMD64 (Opteron) (1/2)
- RAM: 5 GB (initial 2x512MB and additional 2x2GB, ? slots, 16 GB Max, DDR1/333 or DDR1/400 SDRAM)
- Disks (controller Ultra 320 SCSI):
- 2 x 36 GB (hot swap)
- CD-Rom
- Floppy
- LAN: 2 x 10/100/1000
- Form factor: 1U
- Ports: 1 x USB 1.1, 1 x DB9 serial, 2 x PCI-X
- Power: 100-240 V, 50/60 Hz, 465 W PFC supply, dual redundant fans
- Dimensions: W 16.94 in / H 1.69 in / D 28.5 in / Weight 35 lbs
- OS: Debian stable
- User logins: yes
- Source: donated by Ray Racine
Real picture:
Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)
kvm
- Location: Peer1
Model: StarTech IP KVM
- Source: Newegg?
The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.
hopper
- Location: Peer1
- Model: IBM xSeries 335
- Processor: 2 x P4 XEON 2.6Ghz
- RAM: 4 GB, 2x1 GB, 1x2 GB (3/4 slots, 8 GB Max, PC2100 ECC registered)
- Disks:
- 2x SCSI Ultra 320 80 pin. SEAGATE - 5 YEARS MFG WARRANTY. CHEETAH 73.4GB 15000 RPM 80PIN ULTRA320 SCSI HARD DISK DRIVE. 16MB BUFFER 3.5 LOW PROFILE(1.0 INCH). ST373455LC
- Floppy 3.5"
- LAN: 2 x 10/100/1000
- Ports: 3 x USB, 1 x serial, 2 x PCI-X
- PSU: 1/1
- Form factor: 1U
- Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
- OS:
- User logins: no
Name voting at https://members.hcoop.net/portal/poll?report=17
Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299
Real picture:
Back of hopper, taken 24feb09.jpg Hopper card closeup, taken 24feb09.jpg Inside hopper, taken 24feb09.jpg
Use: Initially, server was set up by Clinton Ebadi. It's purpose is to serve as a secondary KDC/AFS server instead of Krunk, and an email server (all email processing).
(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).
Tech.coop
outpost
- Location: Tech.Coop (hosted at Bytemark, UK)
- Model: Xen VM
- Processor:
- RAM: 512 MB
- Disk: 40 GB RAID
- OS: Debian stable
- User logins: no
Use: secondary DNS on a different subnet, all tasks requiring remote location.
Awaiting setup
None.
Awaiting purchase
None.
Decommissioned
abulafia: shell server
- Processor: 1 x 900 MHz
- RAM: 512 MB
- Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
- Extra: 3Ware 6400 PCI ATA RAID controller
Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted. Due to failing parts the machine was decomissioned completely and is no longer planned for reuse.
baltar
- Location: Peer1
- Nortel Baystack 380 switch
- Fabric: Dual 24-port Gigabit
- Memory: 16 MB SDRAM, 32 MB Flash
- Input current: 1.5A to 100 AC
- Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
- Power consumption: 150 W
- Thermal rating: 1000 BTU/hr maximum
- Dimensions: W 17.25 in / H 2.77 in / D 12.75 in / Weight 10.60 lbs
Source: donation by ShaunEmpie
http://support.nortel.com/go/main.jsp?cscat=DOCUMENTATION&poid=11941
214390a.pdf, 214391a.pdf, 214392a.pdf, 214393a.pdf, 214394a.pdf, 216339a.pdf
- Our switch "Baltar" was replaced by a smaller version in Dec 2008 to free up cabinet space, both for extra airflow and preparation to rack a new machine, to which all email processing will be moved.
xanadu
- Location: ???
Model: Dell PowerEdge 1650
- Processor: Dual P3 1.4GHz (2/2)
- RAM: 2 GB (?/4 slots, 4 GB Max, 72-bit ECC PC-133 SDRAM )
- Disks (controller Ultra 160 SCSI):
- 1 x 18 GB (1/3)
- Floppy 3.5"
- LAN: 2 x 10/100/1000
- Ports: 2 x PCI-X
- PSU: ?/2
- Power: 100–240 VAC, 50/60 Hz, 3.9–2.0 A, 275 W (AC) per PSU
- Form factor: 1U
- Dimensions: W 19 in / H 1.67 in / D 26.9 in / Weight 35 lbs
- OS:
- User logins:
Source: donation by NathanKennedy
http://support.dell.com/support/edocs/systems/pe1650/en/index.htm
Removed from rack in December 2008 to make space needed for servicing other machines. Server wasn't able to run with current hardware, and the board determined that it would be more effective to purchase a higher-powered server to fill our rack rather than purchase parts needed to bring Xanadu into operation.
krunk
- Location: Peer1
- Model: Sun Netra
- Processor:
- RAM:
- Disks:
- 2 x 200GB Unknown RPM and Manufacturer
- Form factor: 1U?
- OS: Debian stable?
- User logins: no
- Source: donation by Adam Megacz
Real picture:
Use: was a secondary KDC and AFS server. Decomissioned after it developed problems in the hardware (as we perceived it) network stack.