welcome: please sign in

Diff for "Hardware"

Differences between revisions 153 and 162 (spanning 9 versions)
⇤ ← Revision 153 as of 2009-05-27 13:16:47 →
Size: 6915
Editor: AdamChlipala
Comment: spam
← Revision 162 as of 2009-09-19 18:12:58 → ⇥
Size: 8215
Editor: ClintonEbadi
Comment: added link to IBM support page for hopper
Deletions are marked like this. Additions are marked like this.
Line 6: Line 6:

= Peer1 =

Current pictures of the actual Peer1 cabinet are at [[http://hcoop.net/~rkd/hcoop/imgs/]], taken during [[http://wiki.hcoop.net/OnSiteVisits/20090821]].
Line 25: Line 30:
 * (note: picture above not accurate)
 * Real picture:{{http://hcoop.net/~docelic/deleuze.hcoop.net.jpg}}
Line 55: Line 62:
 * Real picture:{{http://hcoop.net/~docelic/mire.hcoop.net.jpg}}
Line 57: Line 65:

== krunk ==

 * Location: Peer1
 * Model: Sun Netra
 * Processor:
 * RAM:
 * Disks:
  * 2 x 200GB Unknown RPM and Manufacturer
 * Form factor: 1U?
 * OS: Debian stable?
 * User logins: no
 * Source: donation by Adam Megacz

 * KrunkInfoz

'''Use: secondary KDC and AFS server'''
Line 86: Line 77:

== outpost ==

 * Location: Tech.Coop (hosted at Bytemark, UK)
 * Model: Xen VM
 * Processor:
 * RAM: 512 MB
 * Disk: 40 GB RAID
 * OS: Debian stable
 * User logins: no

'''Use: secondary DNS on a different subnet, all tasks requiring remote location.'''


= Awaiting setup =
Line 119: Line 95:
 * Real picture:{{http://hcoop.net/~docelic/hopper.hcoop.net.jpg}}
Line 121: Line 98:
 * [[http://www-947.ibm.com/systems/support/supportsite.wss/selectproduct?familyind=5105587&typeind=0&osind=0&continue.x=12&continue.y=13&brandind=5000008&oldbrand=5000008&oldfamily=5105587&oldtype=0&taskind=2&matrix=Y&psid=bm|IBM xSeries 335 Support Page]]
Line 128: Line 106:
'''Use: Email server (all email processing).''' '''Use: Initially, server was set up by Clinton Ebadi. It's purpose is to serve as a secondary KDC/AFS server instead of Krunk, and an email server (all email processing).'''
Line 133: Line 111:
== xanadu ==
Line 135: Line 112:
 * Location: Peer1
 * Model: Dell PowerEdge 1650
 * Processor: Dual P3 1.4GHz (2/2)
 * RAM: 2 GB (?/4 slots, 4 GB Max, 72-bit ECC PC-133 SDRAM )
 * Disks (controller Ultra 160 SCSI):
  * 1 x 18 GB (1/3)
  * Floppy 3.5"
 * LAN: 2 x 10/100/1000
 * Ports: 2 x PCI-X
 * PSU: ?/2
 * Power: 100–240 VAC, 50/60 Hz, 3.9–2.0 A, 275 W (AC) per PSU
 * Form factor: 1U
 * Dimensions: W 19 in / H 1.67 in / D 26.9 in / Weight 35 lbs
 * OS:
 * User logins:
 * Source: donation by NathanKennedy		 = Tech.coop =
Line 152: Line 114:
 * http://support.dell.com/support/edocs/systems/pe1650/en/index.htm
 * {{http://hcoop.net/~docelic/servidoresdell1650.jpg}}		 == outpost ==
Line 155: Line 116:
'''Use: '''  * Location: Tech.Coop (hosted at Bytemark, UK)
 * Model: Xen VM
 * Processor:
 * RAM: 512 MB
 * Disk: 40 GB RAID
 * OS: Debian stable
 * User logins: no

'''Use: secondary DNS on a different subnet, all tasks requiring remote location.'''
Line 158: Line 127:
= Awaiting setup =

None.
Line 159: Line 132:

None.
Line 184: Line 159:

== xanadu ==

 * Location: ???
 * Model: Dell PowerEdge 1650
 * Processor: Dual P3 1.4GHz (2/2)
 * RAM: 2 GB (?/4 slots, 4 GB Max, 72-bit ECC PC-133 SDRAM )
 * Disks (controller Ultra 160 SCSI):
  * 1 x 18 GB (1/3)
  * Floppy 3.5"
 * LAN: 2 x 10/100/1000
 * Ports: 2 x PCI-X
 * PSU: ?/2
 * Power: 100–240 VAC, 50/60 Hz, 3.9–2.0 A, 275 W (AC) per PSU
 * Form factor: 1U
 * Dimensions: W 19 in / H 1.67 in / D 26.9 in / Weight 35 lbs
 * OS:
 * User logins:
 * Source: donation by NathanKennedy

 * http://support.dell.com/support/edocs/systems/pe1650/en/index.htm
 * {{http://hcoop.net/~docelic/servidoresdell1650.jpg}}

Removed from rack in December 2008 to make space needed for servicing other machines. Server wasn't able to run with current hardware, and the board determined that it would be more effective to purchase a higher-powered server to fill our rack rather than purchase parts needed to bring Xanadu into operation.

== krunk ==

 * Location: Peer1
 * Model: Sun Netra
 * Processor:
 * RAM:
 * Disks:
  * 2 x 200GB Unknown RPM and Manufacturer
 * Form factor: 1U?
 * OS: Debian stable?
 * User logins: no
 * Source: donation by Adam Megacz
 * KrunkInfoz
 * Real picture: {{http://hcoop.net/~docelic/krunk.hcoop.net.jpg}}

'''Use: was a secondary KDC and AFS server. Decomissioned after it developed problems in the hardware (as we perceived it) network stack. '''

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

Contents

  1. Peer1
    1. deleuze
    2. mire
    3. kvm
    4. hopper
  2. Tech.coop
    1. outpost
  3. Awaiting setup
  4. Awaiting purchase
  5. Decommissioned
    1. abulafia: shell server
    2. baltar
    3. xanadu
    4. krunk

Peer1

Current pictures of the actual Peer1 cabinet are at http://hcoop.net/~rkd/hcoop/imgs/, taken during http://wiki.hcoop.net/OnSiteVisits/20090821.

deleuze

  • Location: Peer1

  • Model: Dell PowerEdge 2850

  • Processor: 2 x 2.8 GHz Intel Xeon (2/2)
  • RAM: 4 GB (? slots, 16 GB Max, DDR-2400 SDRAM)
  • Disks (controller Ultra 320 SCSI):

    • 4 x 10K Seagate Cheetah SCSI drives, 73GB and

    • 2 x 10K Seagate Cheetah SCSI drives, 36GB
  • LAN: 2 x 10/100/1000
  • Extra: RAID kit, with battery, etc., 256 MB RAID cache, 2 power supplies
  • Form factor: 2U
  • OS: Debian stable
  • User logins: no
  • Source: donation by Justin Leitgeb

  • Maintenance Manual for the PE 2850

  • http://www.dell.com/downloads/global/products/pedge/en/2850_specs.pdf

  • http://hcoop.net/~docelic/dell-poweredge-2850-i1.jpg

  • (note: picture above not accurate)

  • Real picture:http://hcoop.net/~docelic/deleuze.hcoop.net.jpg

Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.

mire

Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)

kvm

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

hopper

Back of hopper, taken 24feb09.jpg Hopper card closeup, taken 24feb09.jpg Inside hopper, taken 24feb09.jpg

Use: Initially, server was set up by Clinton Ebadi. It's purpose is to serve as a secondary KDC/AFS server instead of Krunk, and an email server (all email processing).

(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).

Tech.coop

outpost

  • Location: Tech.Coop (hosted at Bytemark, UK)
  • Model: Xen VM
  • Processor:
  • RAM: 512 MB
  • Disk: 40 GB RAID
  • OS: Debian stable
  • User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Awaiting setup

None.

Awaiting purchase

None.

Decommissioned

abulafia: shell server

  • Processor: 1 x 900 MHz
  • RAM: 512 MB
  • Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
  • Extra: 3Ware 6400 PCI ATA RAID controller

Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted. Due to failing parts the machine was decomissioned completely and is no longer planned for reuse.

baltar

xanadu

  • Location: ???

  • Model: Dell PowerEdge 1650

  • Processor: Dual P3 1.4GHz (2/2)
  • RAM: 2 GB (?/4 slots, 4 GB Max, 72-bit ECC PC-133 SDRAM )
  • Disks (controller Ultra 160 SCSI):
    • 1 x 18 GB (1/3)
    • Floppy 3.5"
  • LAN: 2 x 10/100/1000
  • Ports: 2 x PCI-X
  • PSU: ?/2
  • Power: 100–240 VAC, 50/60 Hz, 3.9–2.0 A, 275 W (AC) per PSU
  • Form factor: 1U
  • Dimensions: W 19 in / H 1.67 in / D 26.9 in / Weight 35 lbs
  • OS:
  • User logins:

  • Source: donation by NathanKennedy

  • http://support.dell.com/support/edocs/systems/pe1650/en/index.htm

  • http://hcoop.net/~docelic/servidoresdell1650.jpg

Removed from rack in December 2008 to make space needed for servicing other machines. Server wasn't able to run with current hardware, and the board determined that it would be more effective to purchase a higher-powered server to fill our rack rather than purchase parts needed to bring Xanadu into operation.

krunk

  • Location: Peer1
  • Model: Sun Netra
  • Processor:
  • RAM:
  • Disks:
    • 2 x 200GB Unknown RPM and Manufacturer
  • Form factor: 1U?
  • OS: Debian stable?
  • User logins: no
  • Source: donation by Adam Megacz

  • KrunkInfoz

  • Real picture: http://hcoop.net/~docelic/krunk.hcoop.net.jpg

Use: was a secondary KDC and AFS server. Decomissioned after it developed problems in the hardware (as we perceived it) network stack.

Hardware (last edited 2021-04-17 15:58:03 by ClintonEbadi)