welcome: please sign in

Diff for "Hardware"

Differences between revisions 18 and 94 (spanning 76 versions)
⇤ ← Revision 18 as of 2006-06-24 23:50:35 →
Size: 5393
Editor: JustinLeitgeb
Comment: added note on switches.
← Revision 94 as of 2008-03-10 03:22:02 → ⇥
Size: 5790
Editor: DavorOcelic
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= New System Hardware = #pragma section-numbers off
Line 3: Line 3:
During the HCoop IRC meeting on June 24, 2006, the group decided that it would based it's new system architecture on the following pieces of hardware: This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.
Line 5: Line 5:
 * Two robust servers, one that doesn't allow normal user logins, and one that does.
 * One switch to form a LAN between these servers.
 * One serial port device, to facilitate remote access to our servers.		 [[TableOfContents()]]
Line 9: Line 7:
Also, it was mentioned that we should research hardware support contracts from any vendor that will be selling us equipment. == deleuze ==
 * Location: Peer1
 * Model: Dell PowerEdge 2850
 * Processor: 2 x 2.8 GHz Intel Xeon (2/2)
 * RAM: 4 GB (? slots, 16 GB Max, DDR-2400 SDRAM)
 * Disks (controller Ultra 320 SCSI):
  * 4 x 10K Seagate Cheetah SCSI drives, 73GB '''and'''
  * 2 x 10K Seagate Cheetah SCSI drives, 36GB
 * LAN: 2 x 10/100/1000
 * Extra: RAID kit, with battery, etc., 256 MB RAID cache, 2 power supplies
 * Form factor: 2U
 * OS: Debian stable
 * User logins: no
 * Source: donation by Justin Leitgeb
Line 11: Line 22:
Additionally, group decided that the server that HCoop currently owns, Abulafia, will be brought to he.net for shell service. This will follow a necessary re-load of the OS software at a time to be determined later.  * [https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp Maintenance Manual for the PE 2850]
 * http://www.dell.com/downloads/global/products/pedge/en/2850_specs.pdf
 * http://deleuze.hcoop.net/~docelic/dell-poweredge-2850-i1.jpg
Line 13: Line 26:
This page will serve as a forum for collaborative research on the pieces of hardware that we need. '''Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.'''
Line 15: Line 28:
== Servers == == mire ==
Line 17: Line 30:
We will be purchasing two servers, which will be configured and sent to he.net for colocation.  * Location: Peer1
 * Model: Sun Fire v20z
 * Processor: 1 x 1.6GHz AMD64 (Opteron) (1/2)
 * RAM: 5 GB (initial 2x512MB and additional 2x2GB, ? slots, 16 GB Max, DDR1/333 or DDR1/400 SDRAM)
 * Disks (controller Ultra 320 SCSI):
  * 2 x 36 GB (hot swap)
  * CD-Rom
  * Floppy
 * LAN: 2 x 10/100/1000
 * Form factor: 1U
 * Ports: 1 x USB 1.1, 1 x DB9 serial, 2 x PCI-X
 * Power: 100-240 V, 50/60 Hz, 465 W PFC supply, dual redundant fans
 * Dimensions: W 16.94 in / H 1.69 in / D 28.5 in / Weight 35 lbs
 * OS: Debian stable
 * User logins: yes
 * Source: donated by Ray Racine
Line 19: Line 47:
=== Desired Features ===  * [http://onesearch.sun.com/search/docs/index.jsp?col=docs_en&locale=en&qt=Sun+Fire+v20z Search Sun for Product Documentation, including Maintenance and Troubleshooting Manuals for Sun Fire v20z]
 * http://docs.sun.com/source/817-5248-20/index.html
 * http://www.sun.com/servers/entry/v20z/index.jsp
 * http://deleuze.hcoop.net/~docelic/sunFIRE_V20z.jpg
 * http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg
 * http://deleuze.hcoop.net/~docelic/SunFireV20z_expl.gif
Line 21: Line 54:
These servers should be as redundant as possible. At this point, we cannot afford to have less than one point of failure in many areas, so we should look for the following features in our new servers: '''Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)'''
Line 23: Line 56:
 * Redundant power supplies.
 * Hardware RAID.
 * Dual CPU's, AMD seems to be a stronger option than Intel		 == krunk ==
Line 27: Line 58:
==== Differences Between the Servers ====  * Location: Peer1
 * Model: Sun Netra
 * Processor:
 * RAM:
 * Disks:
  * 2 x 200GB Unknown RPM and Manufacturer
 * Form factor: 1U?
 * OS: Debian stable?
 * User logins: no
 * Source: donation by Adam Megacz
Line 29: Line 69:
The admin-only server will hopefully be serving an AFS file system, which means that fancier kinds of RAID are justified there. The all-members server can get away with cheaper (and maybe even faster) solutions for local disk access.  * KrunkInfoz
Line 31: Line 71:
JustinLeitgeb thinks that perhaps RAID 1 would work on the all-members server, and either RAID 5 or RAID 10 on the admin server. It should be RAID 10 if we can afford it, or RAID 5 if we're shorter on cash. :) '''Use: secondary KDC and AFS server'''
Line 33: Line 73:
There may be other factors influencing different configuration choices between the servers. == baltar ==
Line 35: Line 75:
=== Proposed Models and Vendors ===  * Location: Peer1
 * Nortel Baystack 380 switch
 * Fabric: Dual 24-port Gigabit
 * Memory: 16 MB SDRAM, 32 MB Flash
 * Input current: 1.5A to 100 AC
 * Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
 * Power consumption: 150 W
 * Thermal rating: 1000 BTU/hr maximum
 * Dimensions: W 17.25 in / H 2.77 in / D 12.75 in / Weight 10.60 lbs
 * Source: donation by ShaunEmpie
Line 37: Line 86:
Vendors:  * http://deleuze.hcoop.net/~docelic/baystack380gbit.jpg
Line 39: Line 88:
 * [http://www.penguincomputing.com/index.php?option=com_content&task=view&id=172&Itemid=230 Penguin Computing]
 * [http://www.dell.com/ Dell]
 * [http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=M&Category_Code=allracks Monarch Computer Systems]		 == kvm ==
Line 43: Line 90:
Models:  * Location: Peer1
 * Model: StarTech IP KVM
 * Source: Newegg?
Line 45: Line 94:
 * Possible web server configuration from [http://www.penguincomputing.com Penguin] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_web_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_web_server.pdf (PDF)]
 * Possible admin server configuration from [http://www.penguincomputing.com Penguin] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_server.pdf (PDF)]
 * Possible web server from [http://www.dell.com/ Dell] [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_web_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_web_server.pdf (PDF)], based on the Dell PowerEdge 1850.
 * Possible admin server from [http://www.dell.com/ Dell] [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_admin_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_admin_server.pdf (PDF)], based on the Dell PowerEdge 2850 (offers more space for hard disks in our primary file server).
 * Possible admin server configuration from [http://www.penguincomputing.com Penguin], using the 2U server, redundant power supplies, and RAID 5 [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_raid5_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_raid5_server.pdf (PDF)]
 * Possible admin server configuration from [http://www.penguincomputing.com Penguin], using the 2U server, redundant power supplies, and RAID 10 [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_raid10_server_2200.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_raid10_server_2200.pdf (PDF)]		  * [http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US StarTech manual] ([http://deleuze.hcoop.net/~docelic/SV1110IPEXT.pdf local copy]).
Line 52: Line 96:
Note that when I checked Dell dropped something like $1200 off of the price of each server over $4000, so we should expect some significant discounts. Whichever company we plan on going with, we may be able to negotiate lower prices by emphasizing that we may buy more in the future, etc. With the Penguin models, we seem to have to go to the 2U, Altus 2200 in order to get a redundant power supply. The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.
Line 54: Line 98:
== Ethernet Switch == == Standard KVM ==
Line 56: Line 100:
=== Desired Features === We have a standard KVM to allow remote switching between servers as maintenance requires.
Line 58: Line 102:
 * Gigabit
 * 5 ports minimum
 * Managed - so that we can troubleshoot failed NIC's easier
 * Rack-mountable, so that vibration and heat issues are diminished.		 == outpost ==
Line 63: Line 104:
=== Proposed Models and Vendors ===  * Location: Tech.Coop (hosted at Bytemark, UK)
 * Model: Xen VM
 * Processor:
 * RAM: 512 MB
 * Disk: 40 GB RAID
 * OS: Debian stable
 * User logins: no
Line 65: Line 112:
[http://newegg.com/ Newegg] has been recommended to several of us. '''Use: secondary DNS on a different subnet, all tasks requiring remote location.'''
Line 67: Line 114:
 * ($56.99) Highly-rated Netgear switch that is not rack-mountable [[http://www.newegg.com/Product/Product.asp?Item=N82E16833122111 link ]]
 * ($249.99) Level One 16-port rack-mountable switch [[http://www.newegg.com/Product/Product.asp?Item=N82E16833118021 link ]]
Line 70: Line 115:
MichaelOlson thinks that we should go with the Netgear switch. It has been rated as a very reliable product, and is very affordable. = Awaiting setup =
Line 72: Line 117:
== Serial Port == == xanadu ==
Line 74: Line 119:
Docelic, or other users -- please update this section since I am entirely ignorant about these devices! :)  * Location: Peer1
 * Model: Dell PowerEdge 1650
 * Processor: Dual P3 1.4GHz (2/2)
 * RAM: 2 GB (? slots, 4 GB Max, 133MHz SDRAM)
 * Disks (controller Ultra 160 SCSI):
  * 1 x 18 GB
  * Floppy 3.5"
 * Ports: 2 x PCI-X
 * PSU: 1/1
 * Form factor: 1U
 * LAN: 2 x 10/100/1000
Line 76: Line 131:
=== Desired Features ===  * Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
 * OS:
 * User logins:
 * Source: donation by NathanKennedy
Line 78: Line 136:
=== Proposed Models and Vendors ===  * http://support.dell.com/support/edocs/systems/pe1650/en/index.htm
 * http://deleuze.hcoop.net/~docelic/servidoresdell1650.jpg
Line 80: Line 139:
[http://www.cyclades.com/ Cyclades] was mentioned as one vendor of serial port devices which are linux-friendly. '''Use: '''

== xSeries (name to be chosen) ==
 * Location: Peer1
 * Model: IBM xSeries 335
 * Processor: 2 x P4 XEON 2.6Ghz
 * RAM: 2 GB (2/4 slots, 8 GB Max, PC2100 ECC registered)
 * Disks:
  * None (SCSI 80 pin)
  * Floppy 3.5"
 * LAN: 2 x 10/100/1000
 * Ports: 3 x USB, 1 x serial, 2 x PCI-X
 * PSU: 1/1
 * Form factor: 1U
 * Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
 * OS:
 * User logins: yes
 * Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299

 * http://deleuze.hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg
 * Name voting at http://wiki2.hcoop.net/XserverNameSuggestions

'''Use: .'''


= Awaiting purchase =

There are currently no new systems awaiting purchase.

= Decommissioned =

== abulafia: shell server ==
 * Processor: 1 x 900 MHz
 * RAM: 512 MB
 * Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
 * Extra: 3Ware 6400 PCI ATA RAID controller
'''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.'''

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

TableOfContents()

deleuze

Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.

mire

Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)

krunk

  • Location: Peer1
  • Model: Sun Netra
  • Processor:
  • RAM:
  • Disks:
    • 2 x 200GB Unknown RPM and Manufacturer
  • Form factor: 1U?
  • OS: Debian stable?
  • User logins: no
  • Source: donation by Adam Megacz

  • KrunkInfoz

Use: secondary KDC and AFS server

baltar

  • Location: Peer1
  • Nortel Baystack 380 switch
  • Fabric: Dual 24-port Gigabit
  • Memory: 16 MB SDRAM, 32 MB Flash
  • Input current: 1.5A to 100 AC
  • Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
  • Power consumption: 150 W
  • Thermal rating: 1000 BTU/hr maximum
  • Dimensions: W 17.25 in / H 2.77 in / D 12.75 in / Weight 10.60 lbs

  • Source: donation by ShaunEmpie

  • http://deleuze.hcoop.net/~docelic/baystack380gbit.jpg

kvm

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

Standard KVM

We have a standard KVM to allow remote switching between servers as maintenance requires.

outpost

  • Location: Tech.Coop (hosted at Bytemark, UK)
  • Model: Xen VM
  • Processor:
  • RAM: 512 MB
  • Disk: 40 GB RAID
  • OS: Debian stable
  • User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Awaiting setup

xanadu

Use:

xSeries (name to be chosen)

Use: .

Awaiting purchase

There are currently no new systems awaiting purchase.

Decommissioned

abulafia: shell server

  • Processor: 1 x 900 MHz
  • RAM: 512 MB
  • Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
  • Extra: 3Ware 6400 PCI ATA RAID controller

Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.

Hardware (last edited 2021-04-17 15:58:03 by ClintonEbadi)