welcome: please sign in

Diff for "Hardware"

Differences between revisions 2 and 97 (spanning 95 versions)
⇤ ← Revision 2 as of 2006-06-24 21:00:04 →
Size: 1355
Editor: JustinLeitgeb
Comment: Added primary sections for hardware to buy.
← Revision 97 as of 2008-03-10 03:44:27 → ⇥
Size: 6316
Editor: DavorOcelic
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= New System Hardware = #pragma section-numbers off
Line 3: Line 3:
During the HCoop IRC meeting on June 24, 2006, the group decided that it would based it's new system architecture on the following pieces of hardware: This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.
Line 5: Line 5:
 * Two robust servers, one that doesn't allow normal user logins, and one that does.
 * One switch to form a LAN between these servers.
 * One serial port device, to facilitate remote access to our servers.		 [[TableOfContents()]]
Line 9: Line 7:
Also, it was mentioned that we should research hardware support contracts from any vendor that will be selling us equipment. == deleuze ==
 * Location: Peer1
 * Model: Dell PowerEdge 2850
 * Processor: 2 x 2.8 GHz Intel Xeon (2/2)
 * RAM: 4 GB (? slots, 16 GB Max, DDR-2400 SDRAM)
 * Disks (controller Ultra 320 SCSI):
  * 4 x 10K Seagate Cheetah SCSI drives, 73GB '''and'''
  * 2 x 10K Seagate Cheetah SCSI drives, 36GB
 * LAN: 2 x 10/100/1000
 * Extra: RAID kit, with battery, etc., 256 MB RAID cache, 2 power supplies
 * Form factor: 2U
 * OS: Debian stable
 * User logins: no
 * Source: donation by Justin Leitgeb
Line 11: Line 22:
Additionally, group decided that the server that HCoop currently owns, Abulafia, will be brought to he.net for shell service. This will follow a necessary re-load of the OS software at a time to be determined later.  * [https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp Maintenance Manual for the PE 2850]
 * http://www.dell.com/downloads/global/products/pedge/en/2850_specs.pdf
 * http://deleuze.hcoop.net/~docelic/dell-poweredge-2850-i1.jpg
Line 13: Line 26:
This page will serve as a forum for collaborative research on the pieces of hardware that we need. '''Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.'''
Line 15: Line 28:
== Servers == == mire ==
Line 17: Line 30:
=== Server Hardware Specifications ===  * Location: Peer1
 * Model: Sun Fire v20z
 * Processor: 1 x 1.6GHz AMD64 (Opteron) (1/2)
 * RAM: 5 GB (initial 2x512MB and additional 2x2GB, ? slots, 16 GB Max, DDR1/333 or DDR1/400 SDRAM)
 * Disks (controller Ultra 320 SCSI):
  * 2 x 36 GB (hot swap)
  * CD-Rom
  * Floppy
 * LAN: 2 x 10/100/1000
 * Form factor: 1U
 * Ports: 1 x USB 1.1, 1 x DB9 serial, 2 x PCI-X
 * Power: 100-240 V, 50/60 Hz, 465 W PFC supply, dual redundant fans
 * Dimensions: W 16.94 in / H 1.69 in / D 28.5 in / Weight 35 lbs
 * OS: Debian stable
 * User logins: yes
 * Source: donated by Ray Racine
Line 19: Line 47:
=== Server Hardware Vendors ===  * [http://onesearch.sun.com/search/docs/index.jsp?col=docs_en&locale=en&qt=Sun+Fire+v20z Search Sun for Product Documentation, including Maintenance and Troubleshooting Manuals for Sun Fire v20z]
 * http://docs.sun.com/source/817-5248-20/index.html
 * http://www.sun.com/servers/entry/v20z/index.jsp
 * http://deleuze.hcoop.net/~docelic/sunFIRE_V20z.jpg
 * http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg
 * http://deleuze.hcoop.net/~docelic/SunFireV20z_expl.gif
Line 21: Line 54:
== Ethernet Switch == '''Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)'''
Line 23: Line 56:
=== Switch Hardware Specifications === == krunk ==
Line 25: Line 58:
=== Switch Hardware Vendors ===  * Location: Peer1
 * Model: Sun Netra
 * Processor:
 * RAM:
 * Disks:
  * 2 x 200GB Unknown RPM and Manufacturer
 * Form factor: 1U?
 * OS: Debian stable?
 * User logins: no
 * Source: donation by Adam Megacz
Line 27: Line 69:
== Serial Port ==  * KrunkInfoz
Line 29: Line 71:
Docelic, or other users -- please update this section since I am entirely ignorant about these devices! :) '''Use: secondary KDC and AFS server'''
Line 31: Line 73:
=== Serial Port Specifications === == baltar ==
Line 33: Line 75:
=== Serial Port Vendors ===  * Location: Peer1
 * Nortel Baystack 380 switch
 * Fabric: Dual 24-port Gigabit
 * Memory: 16 MB SDRAM, 32 MB Flash
 * Input current: 1.5A to 100 AC
 * Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
 * Power consumption: 150 W
 * Thermal rating: 1000 BTU/hr maximum
 * Dimensions: W 17.25 in / H 2.77 in / D 12.75 in / Weight 10.60 lbs
 * Source: donation by ShaunEmpie
Line 35: Line 86:
[http://www.cyclades.com/ Cyclades] was mentioned as one vendor of serial port devices which are linux-friendly.  * http://support.nortel.com/go/main.jsp?cscat=DOCUMENTATION&poid=11941
 * [http://deleuze.hcoop.net/~docelic/214390a.pdf 214390a.pdf], [http://deleuze.hcoop.net/~docelic/214391a.pdf 214391a.pdf], [http://deleuze.hcoop.net/~docelic/214392a.pdf 214392a.pdf], [http://deleuze.hcoop.net/~docelic/214393a.pdf 214393a.pdf], [http://deleuze.hcoop.net/~docelic/214394a.pdf 214394a.pdf], [http://deleuze.hcoop.net/~docelic/216339a.pdf 216339a.pdf]
 * http://deleuze.hcoop.net/~docelic/baystack380gbit.jpg

== kvm ==

 * Location: Peer1
 * Model: StarTech IP KVM
 * Source: Newegg?

 * [http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US StarTech manual] ([http://deleuze.hcoop.net/~docelic/SV1110IPEXT.pdf local copy]).

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

== Standard KVM ==

We have a standard KVM to allow remote switching between servers as maintenance requires.

== outpost ==

 * Location: Tech.Coop (hosted at Bytemark, UK)
 * Model: Xen VM
 * Processor:
 * RAM: 512 MB
 * Disk: 40 GB RAID
 * OS: Debian stable
 * User logins: no

'''Use: secondary DNS on a different subnet, all tasks requiring remote location.'''


= Awaiting setup =

== xanadu ==

 * Location: Peer1
 * Model: Dell PowerEdge 1650
 * Processor: Dual P3 1.4GHz (2/2)
 * RAM: 2 GB (?/4 slots, 4 GB Max, 72-bit ECC PC-133 SDRAM )
 * Disks (controller Ultra 160 SCSI):
  * 1 x 18 GB (1/3)
  * Floppy 3.5"
 * LAN: 2 x 10/100/1000
 * Ports: 2 x PCI-X
 * PSU: ?/2
 * Power: 100–240 VAC, 50/60 Hz, 3.9–2.0 A, 275 W (AC) per PSU
 * Form factor: 1U
 * Dimensions: W 19 in / H 1.67 in / D 26.9 in / Weight 35 lbs
 * OS:
 * User logins:
 * Source: donation by NathanKennedy

 * http://support.dell.com/support/edocs/systems/pe1650/en/index.htm
 * http://deleuze.hcoop.net/~docelic/servidoresdell1650.jpg

'''Use: '''

== xSeries (name to be chosen) ==
 * Location: Peer1
 * Model: IBM xSeries 335
 * Processor: 2 x P4 XEON 2.6Ghz
 * RAM: 2 GB (2/4 slots, 8 GB Max, PC2100 ECC registered)
 * Disks:
  * None (SCSI 80 pin)
  * Floppy 3.5"
 * LAN: 2 x 10/100/1000
 * Ports: 3 x USB, 1 x serial, 2 x PCI-X
 * PSU: 1/1
 * Form factor: 1U
 * Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
 * OS:
 * User logins: yes
 * Name voting at http://wiki2.hcoop.net/XserverNameSuggestions
 * Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299

 * http://deleuze.hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg

'''Use: .'''


= Awaiting purchase =

There are currently no new systems awaiting purchase.

= Decommissioned =

== abulafia: shell server ==
 * Processor: 1 x 900 MHz
 * RAM: 512 MB
 * Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
 * Extra: 3Ware 6400 PCI ATA RAID controller
'''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.'''

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

TableOfContents()

deleuze

Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.

mire

Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)

krunk

  • Location: Peer1
  • Model: Sun Netra
  • Processor:
  • RAM:
  • Disks:
    • 2 x 200GB Unknown RPM and Manufacturer
  • Form factor: 1U?
  • OS: Debian stable?
  • User logins: no
  • Source: donation by Adam Megacz

  • KrunkInfoz

Use: secondary KDC and AFS server

baltar

kvm

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

Standard KVM

We have a standard KVM to allow remote switching between servers as maintenance requires.

outpost

  • Location: Tech.Coop (hosted at Bytemark, UK)
  • Model: Xen VM
  • Processor:
  • RAM: 512 MB
  • Disk: 40 GB RAID
  • OS: Debian stable
  • User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Awaiting setup

xanadu

Use:

xSeries (name to be chosen)

Use: .

Awaiting purchase

There are currently no new systems awaiting purchase.

Decommissioned

abulafia: shell server

  • Processor: 1 x 900 MHz
  • RAM: 512 MB
  • Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
  • Extra: 3Ware 6400 PCI ATA RAID controller

Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.

Hardware (last edited 2021-04-17 15:58:03 by ClintonEbadi)