2928
Comment: Differences Between the Servers
|
4550
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
= New System Hardware = | #pragma section-numbers off |
Line 3: | Line 3: |
During the HCoop IRC meeting on June 24, 2006, the group decided that it would based it's new system architecture on the following pieces of hardware: | This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure. |
Line 5: | Line 5: |
* Two robust servers, one that doesn't allow normal user logins, and one that does. * One switch to form a LAN between these servers. * One serial port device, to facilitate remote access to our servers. |
[[TableOfContents()]] |
Line 9: | Line 7: |
Also, it was mentioned that we should research hardware support contracts from any vendor that will be selling us equipment. | == deleuze == * Location: Peer1 * Model: Dell PowerEdge 2850 * Processor: 2 x 2.8 GHz Intel Xeo * RAM: 4 GB * Disks: * 4 x 10K Seagate Cheetah SCSI drives, 73GB '''and''' * 2 x 10K Seagate Cheetah SCSI drives, 36GB * Extra: RAID kit, with battery, etc., 256 MB RAID cache, 2 power supplies * Form factor: 2U * OS: Debian stable * User logins: no * Source: donation by Justin Leitgeb |
Line 11: | Line 21: |
Additionally, group decided that the server that HCoop currently owns, Abulafia, will be brought to he.net for shell service. This will follow a necessary re-load of the OS software at a time to be determined later. | * [https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp Maintenance Manual for the PE 2850] * http://deleuze.hcoop.net/~docelic/dell-poweredge-2850-i1.jpg |
Line 13: | Line 24: |
This page will serve as a forum for collaborative research on the pieces of hardware that we need. | '''Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.''' |
Line 15: | Line 26: |
== Servers == | == mire == |
Line 17: | Line 28: |
We will be purchasing two servers, which will be configured and sent to he.net for colocation. | * Location: Peer1 * Model: Sun Fire v20z * Processor: 1 x 1.6GHz AMD64 (Opteron) * RAM: 5 GB (initial 2x512MB and additional 2x2GB) * Disks: 2 x 36 GB Ultra320 SCSI (hot swap) * Form factor: 1U * Ultra 320 SCSI controller embedded in mainboard * OS: Debian stable * User logins: yes * Source: donated by Ray Racine |
Line 19: | Line 39: |
=== Desired Features === | * [http://onesearch.sun.com/search/docs/index.jsp?col=docs_en&locale=en&qt=Sun+Fire+v20z Search Sun for Product Documentation, including Maintenance and Troubleshooting Manuals for Sun Fire v20z] * http://docs.sun.com/source/817-5248-20/index.html * http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg |
Line 21: | Line 43: |
These servers should be as redundant as possible. At this point, we cannot afford to have less than one point of failure in many areas, so we should look for the following features in our new servers: | '''Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)''' |
Line 23: | Line 45: |
* Redundant power supplies. * Hardware RAID. * Dual CPU's, AMD seems to be a stronger option than Intel |
== krunk == |
Line 27: | Line 47: |
==== Differences Between the Servers ==== | * Location: Peer1 * Model: Sun Netra * Processor: * RAM: * Disks: * 2 x 200GB Unknown RPM and Manufacturer * Form factor: 1U? * OS: Debian stable? * User logins: no * Source: donation by Adam Megacz |
Line 29: | Line 58: |
The admin-only server will hopefully be serving an AFS file system, which means that fancier kinds of RAID are justified there. The all-members server can get away with cheaper (and maybe even faster) solutions for local disk access. | * KrunkInfoz |
Line 31: | Line 60: |
There may be other factors influencing different configuration choices between the servers. | '''Use: secondary KDC and AFS server''' |
Line 33: | Line 62: |
=== Proposed Models and Vendors === | == baltar == |
Line 35: | Line 64: |
Vendors: | * Location: Peer1 * Nortel Baystack 380 switch * Input current: 1.5A to 100 AC * Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz * Power consumption: 150 W * Thermal rating: 1000 BTU/hr maximum |
Line 37: | Line 71: |
* [http://www.penguincomputing.com/index.php?option=com_content&task=view&id=172&Itemid=230 Penguin Computing] * [http://www.dell.com/ Dell] * [http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=M&Category_Code=allracks Monarch Computer Systems] |
* Source: donation by ShaunEmpie |
Line 41: | Line 73: |
== Ethernet Switch == | * [http://vpit.net/es380-guide.pdf ES380 Guide] |
Line 43: | Line 75: |
=== Desired Features === | == kvm == |
Line 45: | Line 77: |
* Gigabit * 5 ports minimum |
* Location: Peer1 * Model: StarTech IP KVM * Source: Newegg? |
Line 48: | Line 81: |
=== Proposed Models and Vendors === | * [http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US StarTech manual]. |
Line 50: | Line 83: |
[http://newegg.com/ Newegg] has been recommended to several of us. | The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server. |
Line 52: | Line 85: |
* ($56.99) Highly-rated Netgear switch that is not rack-mountable [[http://www.newegg.com/Product/Product.asp?Item=N82E16833122111 link ]] * ($249.99) Level One 16-port rack-mountable switch [[http://www.newegg.com/Product/Product.asp?Item=N82E16833118021 link ]] |
== Standard KVM == |
Line 55: | Line 87: |
MichaelOlson thinks that we should go with the Netgear switch. It has been rated as a very reliable product, and is very affordable. | We have a standard KVM to allow remote switching between servers as maintenance requires. |
Line 57: | Line 89: |
== Serial Port == | == outpost == |
Line 59: | Line 91: |
Docelic, or other users -- please update this section since I am entirely ignorant about these devices! :) | * Location: Tech.Coop (hosted at Bytemark, UK) * Model: Xen VM * Processor: * RAM: 512 MB * Disk: 40 GB RAID * OS: Debian stable * User logins: no |
Line 61: | Line 99: |
=== Desired Features === | '''Use: secondary DNS on a different subnet, all tasks requiring remote location.''' |
Line 63: | Line 101: |
=== Proposed Models and Vendors === | |
Line 65: | Line 102: |
[http://www.cyclades.com/ Cyclades] was mentioned as one vendor of serial port devices which are linux-friendly. | = Awaiting setup = == xanadu == * Model: Dell PowerEdge 1650 * Dual P3 1.4GHz * 2G RAM * 18GB SCSI HDD * Source: donation by NathanKennedy '''Use: ''' == xSeries (name to be chosen) == * Location: Peer1 * Model: IBM xSeries 335 * Processor: 2 x P4 XEON 2.6Ghz * RAM: 2 GB (2/4 slots, 8 GB Max, PC2100 ECC registered) * Disks: * None (SCSI 80 pin) * Floppy 3.5" * LAN: 2 x 10/100/1000 * Ports: 3 x USB, 1 x serial, 2 x PCI-X * PSU: 1/1 * Form factor: 1U * Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs * OS: * User logins: yes * Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299 * http://deleuze.hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg * Name voting at http://wiki2.hcoop.net/XserverNameSuggestions '''Use: .''' = Awaiting purchase = There are currently no new systems awaiting purchase. = Decommissioned = == abulafia: shell server == * Processor: 1 x 900 MHz * RAM: 512 MB * Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives) * Extra: 3Ware 6400 PCI ATA RAID controller '''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.''' |
This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.
deleuze
- Location: Peer1
Model: Dell PowerEdge 2850
- Processor: 2 x 2.8 GHz Intel Xeo
- RAM: 4 GB
- Disks:
4 x 10K Seagate Cheetah SCSI drives, 73GB and
- 2 x 10K Seagate Cheetah SCSI drives, 36GB
- Extra: RAID kit, with battery, etc., 256 MB RAID cache, 2 power supplies
- Form factor: 2U
- OS: Debian stable
- User logins: no
- Source: donation by Justin Leitgeb
[https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp Maintenance Manual for the PE 2850]
http://deleuze.hcoop.net/~docelic/dell-poweredge-2850-i1.jpg
Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.
mire
- Location: Peer1
- Model: Sun Fire v20z
- Processor: 1 x 1.6GHz AMD64 (Opteron)
- RAM: 5 GB (initial 2x512MB and additional 2x2GB)
- Disks: 2 x 36 GB Ultra320 SCSI (hot swap)
- Form factor: 1U
- Ultra 320 SCSI controller embedded in mainboard
- OS: Debian stable
- User logins: yes
- Source: donated by Ray Racine
[http://onesearch.sun.com/search/docs/index.jsp?col=docs_en&locale=en&qt=Sun+Fire+v20z Search Sun for Product Documentation, including Maintenance and Troubleshooting Manuals for Sun Fire v20z]
http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg
Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)
krunk
- Location: Peer1
- Model: Sun Netra
- Processor:
- RAM:
- Disks:
- 2 x 200GB Unknown RPM and Manufacturer
- Form factor: 1U?
- OS: Debian stable?
- User logins: no
- Source: donation by Adam Megacz
Use: secondary KDC and AFS server
baltar
- Location: Peer1
- Nortel Baystack 380 switch
- Input current: 1.5A to 100 AC
- Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
- Power consumption: 150 W
- Thermal rating: 1000 BTU/hr maximum
Source: donation by ShaunEmpie
[http://vpit.net/es380-guide.pdf ES380 Guide]
kvm
- Location: Peer1
Model: StarTech IP KVM
- Source: Newegg?
[http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US StarTech manual].
The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.
Standard KVM
We have a standard KVM to allow remote switching between servers as maintenance requires.
outpost
- Location: Tech.Coop (hosted at Bytemark, UK)
- Model: Xen VM
- Processor:
- RAM: 512 MB
- Disk: 40 GB RAID
- OS: Debian stable
- User logins: no
Use: secondary DNS on a different subnet, all tasks requiring remote location.
Awaiting setup
xanadu
Model: Dell PowerEdge 1650
- Dual P3 1.4GHz
- 2G RAM
- 18GB SCSI HDD
Source: donation by NathanKennedy
Use:
xSeries (name to be chosen)
- Location: Peer1
- Model: IBM xSeries 335
- Processor: 2 x P4 XEON 2.6Ghz
- RAM: 2 GB (2/4 slots, 8 GB Max, PC2100 ECC registered)
- Disks:
- None (SCSI 80 pin)
- Floppy 3.5"
- LAN: 2 x 10/100/1000
- Ports: 3 x USB, 1 x serial, 2 x PCI-X
- PSU: 1/1
- Form factor: 1U
- Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
- OS:
- User logins: yes
Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299
http://deleuze.hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg
Name voting at http://wiki2.hcoop.net/XserverNameSuggestions
Use: .
Awaiting purchase
There are currently no new systems awaiting purchase.
Decommissioned
abulafia: shell server
- Processor: 1 x 900 MHz
- RAM: 512 MB
- Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
- Extra: 3Ware 6400 PCI ATA RAID controller
Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.