welcome: please sign in

Diff for "Hardware"

Differences between revisions 77 and 156 (spanning 79 versions)
⇤ ← Revision 77 as of 2008-02-20 18:51:56 →
Size: 5045
Editor: MichaelOlson
Comment: Add place for tech.coop machines
← Revision 156 as of 2009-08-24 23:55:18 → ⇥
Size: 7140
Editor: 78
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
This page collects information on the hardware that we have installed or plan to install at Peer1 as part of our hosting infrastructure. This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.
Line 5: Line 5:
[[TableOfContents()]] <<TableOfContents>>
Line 9: Line 9:
This is a list of the stuff that is colocated at Peer1. Current pictures of the actual Peer1 cabinet are at [[http://hcoop.net/~rkd/hcoop/imgs/]], taken during [[http://wiki.hcoop.net/OnSiteVisits/20090821]].
Line 11: Line 11:
== deleuze: fileserver, static HTML content ==
 * Donated by: Justin Leitgeb
== deleuze ==
 * Location: Peer1
Line 14: Line 15:
 * Processor: 2 x 2.8 GHz Intel Xeon
 * RAM: 4 GB
 * Disks:		  * Processor: 2 x 2.8 GHz Intel Xeon (2/2)
 * RAM: 4 GB (? slots, 16 GB Max, DDR-2400 SDRAM)
 * Disks (controller Ultra 320 SCSI):
Line 19: Line 20:
 * LAN: 2 x 10/100/1000
Line 20: Line 22:
 * [https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp Maintenance Manual for the PE 2850]
'''Intended use: fileserver and host for all services that don't involve dynamic content provided by non-admins. No user logins.'''		  * Form factor: 2U
 * OS: Debian stable
 * User logins: no
 * Source: donation by Justin Leitgeb

 * [[https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp|Maintenance Manual for the PE 2850]]
 * http://www.dell.com/downloads/global/products/pedge/en/2850_specs.pdf
 * {{http://hcoop.net/~docelic/dell-poweredge-2850-i1.jpg}}
 * (note: picture above not accurate)

'''Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.'''

== mire ==

 * Location: Peer1
 * Model: Sun Fire v20z
 * Processor: 1 x 1.6GHz AMD64 (Opteron) (1/2)
 * RAM: 5 GB (initial 2x512MB and additional 2x2GB, ? slots, 16 GB Max, DDR1/333 or DDR1/400 SDRAM)
 * Disks (controller Ultra 320 SCSI):
  * 2 x 36 GB (hot swap)
  * CD-Rom
  * Floppy
 * LAN: 2 x 10/100/1000
 * Form factor: 1U
 * Ports: 1 x USB 1.1, 1 x DB9 serial, 2 x PCI-X
 * Power: 100-240 V, 50/60 Hz, 465 W PFC supply, dual redundant fans
 * Dimensions: W 16.94 in / H 1.69 in / D 28.5 in / Weight 35 lbs
 * OS: Debian stable
 * User logins: yes
 * Source: donated by Ray Racine

 * [[RebootingMireSp]]
 * [[http://docs.sun.com/source/817-5248-21/|SunFire v20z User Guide]]
 * [[http://docs.sun.com/source/817-5249-17/|Service Processor Manual]]
 * http://docs.sun.com/source/817-5248-20/index.html
 * http://www.sun.com/servers/entry/v20z/index.jsp
 * {{http://hcoop.net/~docelic/sunFIRE_V20z.jpg}}
 * {{http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg}}
 * {{http://hcoop.net/~docelic/SunFireV20z_expl.gif}}

'''Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)'''

== krunk ==

 * Location: Peer1
 * Model: Sun Netra
 * Processor:
 * RAM:
 * Disks:
  * 2 x 200GB Unknown RPM and Manufacturer
 * Form factor: 1U?
 * OS: Debian stable?
 * User logins: no
 * Source: donation by Adam Megacz

 * KrunkInfoz

'''Use: secondary KDC and AFS server'''


== kvm ==

 * Location: Peer1
 * Model: StarTech IP KVM
 * Source: Newegg?

 * [[KvmAccess]]
 * [[http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US|StarTech manual]] ([[http://hcoop.net/~docelic/SV1110IPEXT.pdf|local copy]]).

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

= Tech.coop =

== outpost ==

 * Location: Tech.Coop (hosted at Bytemark, UK)
 * Model: Xen VM
 * Processor:
 * RAM: 512 MB
 * Disk: 40 GB RAID
 * OS: Debian stable
 * User logins: no

'''Use: secondary DNS on a different subnet, all tasks requiring remote location.'''


= Awaiting setup =

== hopper ==
 * Location: Peer1
 * Model: IBM xSeries 335
 * Processor: 2 x P4 XEON 2.6Ghz
 * RAM: 4 GB, 2x1 GB, 1x2 GB (3/4 slots, 8 GB Max, PC2100 ECC registered)
 * Disks:
  * 2x SCSI Ultra 320 80 pin. SEAGATE - 5 YEARS MFG WARRANTY. CHEETAH 73.4GB 15000 RPM 80PIN ULTRA320 SCSI HARD DISK DRIVE. 16MB BUFFER 3.5 LOW PROFILE(1.0 INCH). ST373455LC
  * Floppy 3.5"
 * LAN: 2 x 10/100/1000
 * Ports: 3 x USB, 1 x serial, 2 x PCI-X
 * PSU: 1/1
 * Form factor: 1U
 * Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
 * OS:
 * User logins: no
 * Name voting at https://members.hcoop.net/portal/poll?report=17
 * Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299

 * [[HopperServiceProcessor]]
 * {{http://hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg}}

[[attachment:Back of hopper, taken 24feb09.jpg]]
[[attachment:Hopper card closeup, taken 24feb09.jpg]]
[[attachment:Inside hopper, taken 24feb09.jpg]]


'''Use: Email server (all email processing).'''

(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).



= Awaiting purchase =

= Decommissioned =
Line 28: Line 151:
'''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.''' '''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted. Due to failing parts the machine was decomissioned completely and is no longer planned for reuse.'''
Line 30: Line 153:
== mire: dynamic web content ==
http://docs.sun.com/source/817-5248-20/index.html
http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg
 * Donated by: Ray Racine
 * Model: Sun Fire v20z
 * Processor: 1 x 1.6GHz AMD64 (Opteron)
 * RAM: 1 GB
 * Disks: 2 x 36 GB Ultra320 SCSI (hot swap)
 * 1U
 * Ultra 320 SCSI controller embedded in mainboard
 * [http://onesearch.sun.com/search/docs/index.jsp?col=docs_en&locale=en&qt=Sun+Fire+v20z Search Sun for Product Documentation, including Maintenance and Troubleshooting Manuals for Sun Fire v20z]

'''Intended use: dynamic web content and any other Internet services that involve running arbitrary code from members (including custom daemons, etc.)'''

== krunk: secondary KDC and AFS server ==
 * KrunkInfoz
 * Donated by: Adam Megacz
 * Model: Sun Netra
 * Processor:
 * RAM:
 * Disks:
  * 2 x 200GB Unknown RPM and Manufacturer
'''Intended use: secondary KDC and AFS server (backup) in event that the primary server (deleuze) goes down'''

== Other components ==

=== Switch ===
We are proceeding under the assumption that we'll use ShaunEmpie's donation (see HardwareDonations), a Nortel (Baystack) 380 switch. He says:

It is not brand new but is working. Here is [http://vpit.net/es380-guide.pdf a guide] that I was able to find to give anyone interested a more in depth view of it.

VLAN Configuration Proposal:

{{{
With our new setup, I think it would be best to setup a few different
VLANs for different uses. For anyone who is unfamiliar with the term, a
VLAN is a virtual lan. It allows you to have completely separate networks
on the same switch. This will allow us to setup a private network that
the public and peer1 would have no access to. This could be handy for
database systems, NAS, backup servers, etc which you'd want to keep off
the public network.
Proposed Configuration:
VLAN 1. Management VLAN - not used for normal traffic
VLAN 10. Public VLAN - public/Peer1's network
VLAN 20. Private VLAN - private subnet for inter-server traffic
For a starting point i think having ports 1-12 in VLAN 10 and ports 13-24
in VLAN 20 would be best. The VLAN membership of a port can be changed
easily so these would not be set in stone.
The switch allows for many more VLANs than we'll ever need so if anyone
has a suggestion or need for another VLAN it would be trivial to setup.
Any questions/comments, let me know.
-Shaun}}}
ES380 AC Power Specs:
 == baltar ==
 * Location: Peer1
 * Nortel Baystack 380 switch
 * Fabric: Dual 24-port Gigabit
 * Memory: 16 MB SDRAM, 32 MB Flash
Line 88: Line 162:
 * Dimensions: W 17.25 in / H 2.77 in / D 12.75 in / Weight 10.60 lbs
 * Source: donation by ShaunEmpie
 * http://support.nortel.com/go/main.jsp?cscat=DOCUMENTATION&poid=11941
 * [[http://hcoop.net/~docelic/214390a.pdf|214390a.pdf]], [[http://hcoop.net/~docelic/214391a.pdf|214391a.pdf]], [[http://hcoop.net/~docelic/214392a.pdf|214392a.pdf]], [[http://hcoop.net/~docelic/214393a.pdf|214393a.pdf]], [[http://hcoop.net/~docelic/214394a.pdf|214394a.pdf]], [[http://hcoop.net/~docelic/216339a.pdf|216339a.pdf]]
 * {{http://hcoop.net/~docelic/baystack380gbit.jpg}}
 * Our switch "Baltar" was replaced by a smaller version in Dec 2008 to free up cabinet space, both for extra airflow and preparation to rack a new machine, to which all email processing will be moved.
Line 89: Line 169:
=== Serial console ===
Some device to simulate local login over the Internet could be a life saver. JustinLeitgeb mentions a special card that Dell sells that would work with his donation.		 == xanadu ==
Line 92: Line 171:
There are also some really good KVM-over-IP devices out there fairly cheap these days. My provider has one and it works very well, although on the client side you have to use this ugly Windows ActiveX control. I'm sure by now there are KVM-over-IP boxes that speak plain VNC. These should be well under $500. [AdamMegacz]  * Location: ???
 * Model: Dell PowerEdge 1650
 * Processor: Dual P3 1.4GHz (2/2)
 * RAM: 2 GB (?/4 slots, 4 GB Max, 72-bit ECC PC-133 SDRAM )
 * Disks (controller Ultra 160 SCSI):
  * 1 x 18 GB (1/3)
  * Floppy 3.5"
 * LAN: 2 x 10/100/1000
 * Ports: 2 x PCI-X
 * PSU: ?/2
 * Power: 100–240 VAC, 50/60 Hz, 3.9–2.0 A, 275 W (AC) per PSU
 * Form factor: 1U
 * Dimensions: W 19 in / H 1.67 in / D 26.9 in / Weight 35 lbs
 * OS:
 * User logins:
 * Source: donation by NathanKennedy
Line 94: Line 188:
=== IP KVM ===
The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server. See [http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US manual].		  * http://support.dell.com/support/edocs/systems/pe1650/en/index.htm
 * {{http://hcoop.net/~docelic/servidoresdell1650.jpg}}
Line 97: Line 191:
=== Standard KVM ===
We have a standard KVM to allow remote switching between servers as maintenance requires.

= Tech.Coop =

This is a listing of the (virtual) machines colocated at Tech.Coop.		 '''Use: '''

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

Contents

  1. Peer1
    1. deleuze
    2. mire
    3. krunk
    4. kvm
  2. Tech.coop
    1. outpost
  3. Awaiting setup
    1. hopper
  4. Awaiting purchase
  5. Decommissioned
    1. abulafia: shell server
    2. baltar
    3. xanadu

Peer1

Current pictures of the actual Peer1 cabinet are at http://hcoop.net/~rkd/hcoop/imgs/, taken during http://wiki.hcoop.net/OnSiteVisits/20090821.

deleuze

  • Location: Peer1

  • Model: Dell PowerEdge 2850

  • Processor: 2 x 2.8 GHz Intel Xeon (2/2)
  • RAM: 4 GB (? slots, 16 GB Max, DDR-2400 SDRAM)
  • Disks (controller Ultra 320 SCSI):

    • 4 x 10K Seagate Cheetah SCSI drives, 73GB and

    • 2 x 10K Seagate Cheetah SCSI drives, 36GB
  • LAN: 2 x 10/100/1000
  • Extra: RAID kit, with battery, etc., 256 MB RAID cache, 2 power supplies
  • Form factor: 2U
  • OS: Debian stable
  • User logins: no
  • Source: donation by Justin Leitgeb

  • Maintenance Manual for the PE 2850

  • http://www.dell.com/downloads/global/products/pedge/en/2850_specs.pdf

  • http://hcoop.net/~docelic/dell-poweredge-2850-i1.jpg

  • (note: picture above not accurate)

Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.

mire

Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)

krunk

  • Location: Peer1
  • Model: Sun Netra
  • Processor:
  • RAM:
  • Disks:
    • 2 x 200GB Unknown RPM and Manufacturer
  • Form factor: 1U?
  • OS: Debian stable?
  • User logins: no
  • Source: donation by Adam Megacz

  • KrunkInfoz

Use: secondary KDC and AFS server

kvm

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

Tech.coop

outpost

  • Location: Tech.Coop (hosted at Bytemark, UK)
  • Model: Xen VM
  • Processor:
  • RAM: 512 MB
  • Disk: 40 GB RAID
  • OS: Debian stable
  • User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Awaiting setup

hopper

  • Location: Peer1
  • Model: IBM xSeries 335
  • Processor: 2 x P4 XEON 2.6Ghz
  • RAM: 4 GB, 2x1 GB, 1x2 GB (3/4 slots, 8 GB Max, PC2100 ECC registered)
  • Disks:
    • 2x SCSI Ultra 320 80 pin. SEAGATE - 5 YEARS MFG WARRANTY. CHEETAH 73.4GB 15000 RPM 80PIN ULTRA320 SCSI HARD DISK DRIVE. 16MB BUFFER 3.5 LOW PROFILE(1.0 INCH). ST373455LC
    • Floppy 3.5"
  • LAN: 2 x 10/100/1000
  • Ports: 3 x USB, 1 x serial, 2 x PCI-X
  • PSU: 1/1
  • Form factor: 1U
  • Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
  • OS:
  • User logins: no

  • Name voting at https://members.hcoop.net/portal/poll?report=17

  • Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299

  • HopperServiceProcessor

  • http://hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg

Back of hopper, taken 24feb09.jpg Hopper card closeup, taken 24feb09.jpg Inside hopper, taken 24feb09.jpg

Use: Email server (all email processing).

(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).

Awaiting purchase

Decommissioned

abulafia: shell server

  • Processor: 1 x 900 MHz
  • RAM: 512 MB
  • Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
  • Extra: 3Ware 6400 PCI ATA RAID controller

Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted. Due to failing parts the machine was decomissioned completely and is no longer planned for reuse.

baltar

xanadu

  • Location: ???

  • Model: Dell PowerEdge 1650

  • Processor: Dual P3 1.4GHz (2/2)
  • RAM: 2 GB (?/4 slots, 4 GB Max, 72-bit ECC PC-133 SDRAM )
  • Disks (controller Ultra 160 SCSI):
    • 1 x 18 GB (1/3)
    • Floppy 3.5"
  • LAN: 2 x 10/100/1000
  • Ports: 2 x PCI-X
  • PSU: ?/2
  • Power: 100–240 VAC, 50/60 Hz, 3.9–2.0 A, 275 W (AC) per PSU
  • Form factor: 1U
  • Dimensions: W 19 in / H 1.67 in / D 26.9 in / Weight 35 lbs
  • OS:
  • User logins:

  • Source: donation by NathanKennedy

  • http://support.dell.com/support/edocs/systems/pe1650/en/index.htm

  • http://hcoop.net/~docelic/servidoresdell1650.jpg

Use:

Hardware (last edited 2021-04-17 15:58:03 by ClintonEbadi)