This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

TableOfContents()

deleuze

• Location: Peer1

• Model: Dell PowerEdge 2850

• Processor: 2 x 2.8 GHz Intel Xeon
• RAM: 4 GB
• Disks:

  • 4 x 10K Seagate Cheetah SCSI drives, 73GB and

  • 2 x 10K Seagate Cheetah SCSI drives, 36GB
• Extra: RAID kit, with battery, etc., 256 MB RAID cache, 2 power supplies
• OS: Debian stable
• User logins: no
• Source: donation by Justin Leitgeb

• [https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp Maintenance Manual for the PE 2850]

Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.

mire

• Location: Peer1
• Model: Sun Fire v20z
• Processor: 1 x 1.6GHz AMD64 (Opteron)
• RAM: 5 GB (initial 2x512MB and additional 2x2GB)
• Disks: 2 x 36 GB Ultra320 SCSI (hot swap)
• 1U
• Ultra 320 SCSI controller embedded in mainboard
• OS: Debian stable
• User logins: yes
• Source: donated by Ray Racine

• [http://onesearch.sun.com/search/docs/index.jsp?col=docs_en&locale=en&qt=Sun+Fire+v20z Search Sun for Product Documentation, including Maintenance and Troubleshooting Manuals for Sun Fire v20z]

• http://docs.sun.com/source/817-5248-20/index.html

• http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg

Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)

krunk

• Location: Peer1
• Model: Sun Netra
• Processor:
• RAM:
• Disks:
  • 2 x 200GB Unknown RPM and Manufacturer
• OS: Debian stable?
• User logins: no
• Source: donation by Adam Megacz

• KrunkInfoz

Use: secondary KDC and AFS server

baltar

• Location: Peer1
• Nortel Baystack 380 switch
• Input current: 1.5A to 100 AC
• Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
• Power consumption: 150 W
• Thermal rating: 1000 BTU/hr maximum

• Source: donation by ShaunEmpie

• [http://vpit.net/es380-guide.pdf ES380 Guide]

IP KVM

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

• Location: Peer1
• Source: Newegg?

• [http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US StarTech manual].

Standard KVM

We have a standard KVM to allow remote switching between servers as maintenance requires.

outpost

• Location: Tech.Coop (hosted at Bytemark, UK)
• Model: Xen VM
• Processor:
• RAM: 512 MB
• Disk: 40 GB RAID
• OS: Debian stable
• User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Awaiting setup

xanadu

• Model: Dell PowerEdge 1650

• Dual P3 1.4GHz
• 2G RAM
• 18GB SCSI HDD

• Source: donation by NathanKennedy

Use:

Awaiting purchase

There are currently no new systems awaiting purchase.

Decommissioned

abulafia: shell server

• Processor: 1 x 900 MHz
• RAM: 512 MB
• Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
• Extra: 3Ware 6400 PCI ATA RAID controller

Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.