4991
Comment: added RAID 5 server
|
4608
fritz has 24G of RAM since last year and deleuze is finally removed from service
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
= New System Hardware = | #pragma section-numbers off |
Line 3: | Line 3: |
During the HCoop IRC meeting on June 24, 2006, the group decided that it would based it's new system architecture on the following pieces of hardware: | This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure. |
Line 5: | Line 5: |
* Two robust servers, one that doesn't allow normal user logins, and one that does. * One switch to form a LAN between these servers. * One serial port device, to facilitate remote access to our servers. |
<<TableOfContents>> |
Line 9: | Line 7: |
Also, it was mentioned that we should research hardware support contracts from any vendor that will be selling us equipment. | = Peer1 = |
Line 11: | Line 9: |
Additionally, group decided that the server that HCoop currently owns, Abulafia, will be brought to he.net for shell service. This will follow a necessary re-load of the OS software at a time to be determined later. | Current pictures of the actual Peer1 cabinet are at [[OnSiteVisits/20130627]]. |
Line 13: | Line 11: |
This page will serve as a forum for collaborative research on the pieces of hardware that we need. | == fritz == |
Line 15: | Line 13: |
== Servers == | FritzInfo |
Line 17: | Line 15: |
We will be purchasing two servers, which will be configured and sent to he.net for colocation. | * Location: Peer1 * Model: Dell PowerEdge 2970 * Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt * RAM: 24GB (4x2GB + 4x4GB), 800MHz, Dual Ranked * 1x6 Backplane for 3.5-inch Hard Drives * Integrated SAS/SATA No RAID * Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1 * Redundant Power Supply with Dual Cords * Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC * Form factor: 2U * OS: Debian Squeeze * User logins: no * Source: purchase from Dell store, 2x 1 TB disks from Newegg |
Line 19: | Line 29: |
=== Desired Features === | '''Use: AndrewFileSystem fileserver, MitKerberos kdc, KernelVirtualMachine host''' |
Line 21: | Line 31: |
These servers should be as redundant as possible. At this point, we cannot afford to have less than one point of failure in many areas, so we should look for the following features in our new servers: | === KVM: navajos === |
Line 23: | Line 33: |
* Redundant power supplies. * Hardware RAID. * Dual CPU's, AMD seems to be a stronger option than Intel |
Location:: virtual machine on fritz Allocated Resources:: 6 processors, 6G RAM, 60G storage Operating System:: Debian Wheezy AMD64 User Logins:: No Intended Use:: Apache hosting and dynamic web content, including HCoop web services Details:: ServerNavajos |
Line 27: | Line 40: |
==== Differences Between the Servers ==== | === KVM: bog === |
Line 29: | Line 42: |
The admin-only server will hopefully be serving an AFS file system, which means that fancier kinds of RAID are justified there. The all-members server can get away with cheaper (and maybe even faster) solutions for local disk access. | Location:: virtual machine on fritz Allocated Resources:: 4 processors, 3G RAM, 30G storage Operating System:: Debian Wheezy AMD64 User Logins:: Yes Intended Use:: Member shell and server hosting Details:: ServerBog |
Line 31: | Line 49: |
JustinLeitgeb thinks that perhaps RAID 1 would work on the all-members server, and either RAID 5 or RAID 10 on the admin server. It should be RAID 10 if we can afford it, or RAID 5 if we're shorter on cash. :) | === KVM: mccarthy === |
Line 33: | Line 51: |
There may be other factors influencing different configuration choices between the servers. | Location:: virtual machine on fritz Allocated Resources:: 4 processors, 2G RAM, 45G storage Operating System:: Debian Jessie AMD64 User Logins:: No Intended Use:: Mail server Details:: ServerMcCarthy == kvm == |
Line 35: | Line 60: |
=== Proposed Models and Vendors === | * Location: Peer1 * Model: StarTech IP KVM * Source: Newegg? |
Line 37: | Line 64: |
Vendors: | * [[KvmAccess]] * [[http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US|StarTech manual]] ([[http://hcoop.net/~docelic/SV1110IPEXT.pdf|local copy]]). |
Line 39: | Line 67: |
* [http://www.penguincomputing.com/index.php?option=com_content&task=view&id=172&Itemid=230 Penguin Computing] * [http://www.dell.com/ Dell] * [http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=M&Category_Code=allracks Monarch Computer Systems] Models: * Possible web server configuration from [http://www.penguincomputing.com Penguin] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_web_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_web_server.pdf (PDF)] * Possible admin server configuration from [http://www.penguincomputing.com Penguin] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_server.pdf (PDF)] * Possible web server from [http://www.dell.com/ Dell] [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_web_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_web_server.pdf (PDF)], based on the Dell PowerEdge 1850. * Possible admin server from [http://www.dell.com/ Dell] [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_admin_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_admin_server.pdf (PDF)], based on the Dell PowerEdge 2850 (offers more space for hard disks in our primary file server). * Possible admin server configuration from [http://www.penguincomputing.com Penguin], using the 2U server, redundant power supplies, and RAID 5 [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_raid5_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_raid5_server.pdf (PDF)] |
The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server. |
Line 52: | Line 70: |
Note that when I checked Dell dropped something like $1200 off of the price of each server over $4000, so we should expect some significant discounts. Whichever company we plan on going with, we may be able to negotiate lower prices by emphasizing that we may buy more in the future, etc. The Penguin option doesn't seem to have redundant power supplies, which is disappointing. Does anyone know of a non-Dell vendor that can provide redundant power supplies? | == hopper == |
Line 54: | Line 72: |
== Ethernet Switch == | * Location: Peer1 * Model: IBM xSeries 335 * Processor: 2 x single-core P4 XEON 2.6Ghz with hyperthreading * RAM: 4 GB, 2x1 GB, 1x2 GB (3/4 slots, 8 GB Max, PC2100 ECC registered) * Disks: * 2x SCSI Ultra 320 80 pin. SEAGATE - 5 YEARS MFG WARRANTY. CHEETAH 73.4GB 15000 RPM 80PIN ULTRA320 SCSI HARD DISK DRIVE. 16MB BUFFER 3.5 LOW PROFILE(1.0 INCH). ST373455LC * Floppy 3.5" * LAN: 2 x 10/100/1000 * Ports: 3 x USB, 1 x serial, 2 x PCI-X * PSU: 1/1 * Form factor: 1U * Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs * OS: Debian Squeeze * User logins: no * Name voting at https://members.hcoop.net/portal/poll?report=17 * Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299 * Real picture:{{http://hcoop.net/~docelic/hopper.hcoop.net.jpg}} |
Line 56: | Line 90: |
=== Desired Features === | * [[HopperServiceProcessor]] * [[http://www-947.ibm.com/systems/support/supportsite.wss/selectproduct?familyind=5105587&typeind=0&osind=0&continue.x=12&continue.y=13&brandind=5000008&oldbrand=5000008&oldfamily=5105587&oldtype=0&taskind=2&matrix=Y&psid=bm|IBM xSeries 335 Support Page]] * {{http://hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg}} |
Line 58: | Line 94: |
* Gigabit * 5 ports minimum |
[[attachment:Back of hopper, taken 24feb09.jpg]] [[attachment:Hopper card closeup, taken 24feb09.jpg]] [[attachment:Inside hopper, taken 24feb09.jpg]] |
Line 61: | Line 98: |
=== Proposed Models and Vendors === | |
Line 63: | Line 99: |
[http://newegg.com/ Newegg] has been recommended to several of us. | '''Use: Secondary KDC, secondary openafs volume and fileserver, and SpamAssassin''' |
Line 65: | Line 101: |
* ($56.99) Highly-rated Netgear switch that is not rack-mountable [[http://www.newegg.com/Product/Product.asp?Item=N82E16833122111 link ]] * ($249.99) Level One 16-port rack-mountable switch [[http://www.newegg.com/Product/Product.asp?Item=N82E16833118021 link ]] |
(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver). |
Line 68: | Line 103: |
MichaelOlson thinks that we should go with the Netgear switch. It has been rated as a very reliable product, and is very affordable. | |
Line 70: | Line 104: |
== Serial Port == | = Linode = |
Line 72: | Line 106: |
Docelic, or other users -- please update this section since I am entirely ignorant about these devices! :) | == outpost == |
Line 74: | Line 108: |
=== Desired Features === | * Location: Linode (hosted at UK data center) * Model: Xen VM * Processor: 8 cores (1x priority?) * RAM: 1024 MB * Disk: 40 GB * OS: Debian wheezy * User logins: no |
Line 76: | Line 116: |
=== Proposed Models and Vendors === | '''Use: secondary DNS on a different subnet, all tasks requiring remote location.''' |
Line 78: | Line 118: |
[http://www.cyclades.com/ Cyclades] was mentioned as one vendor of serial port devices which are linux-friendly. | = Awaiting setup = None. = Awaiting purchase = We need a new KVM host and drives for staging offsite backups of openafs. See NewServerDiscussion2013 = Decommissioned = See [[/Decommissioned]] for older machines ---- CategorySystemAdministration |
This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.
Contents
Peer1
Current pictures of the actual Peer1 cabinet are at OnSiteVisits/20130627.
fritz
- Location: Peer1
Model: Dell PowerEdge 2970
Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt
- RAM: 24GB (4x2GB + 4x4GB), 800MHz, Dual Ranked
- 1x6 Backplane for 3.5-inch Hard Drives
- Integrated SAS/SATA No RAID
Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1
- Redundant Power Supply with Dual Cords
Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC
- Form factor: 2U
- OS: Debian Squeeze
- User logins: no
- Source: purchase from Dell store, 2x 1 TB disks from Newegg
Use: AndrewFileSystem fileserver, MitKerberos kdc, KernelVirtualMachine host
KVM: navajos
- Location
- virtual machine on fritz
- Allocated Resources
- 6 processors, 6G RAM, 60G storage
- Operating System
- Debian Wheezy AMD64
- User Logins
- No
- Intended Use
- Apache hosting and dynamic web content, including HCoop web services
- Details
KVM: bog
- Location
- virtual machine on fritz
- Allocated Resources
- 4 processors, 3G RAM, 30G storage
- Operating System
- Debian Wheezy AMD64
- User Logins
- Yes
- Intended Use
- Member shell and server hosting
- Details
KVM: mccarthy
- Location
- virtual machine on fritz
- Allocated Resources
- 4 processors, 2G RAM, 45G storage
- Operating System
- Debian Jessie AMD64
- User Logins
- No
- Intended Use
- Mail server
- Details
kvm
- Location: Peer1
Model: StarTech IP KVM
- Source: Newegg?
The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.
hopper
- Location: Peer1
- Model: IBM xSeries 335
- Processor: 2 x single-core P4 XEON 2.6Ghz with hyperthreading
- RAM: 4 GB, 2x1 GB, 1x2 GB (3/4 slots, 8 GB Max, PC2100 ECC registered)
- Disks:
- 2x SCSI Ultra 320 80 pin. SEAGATE - 5 YEARS MFG WARRANTY. CHEETAH 73.4GB 15000 RPM 80PIN ULTRA320 SCSI HARD DISK DRIVE. 16MB BUFFER 3.5 LOW PROFILE(1.0 INCH). ST373455LC
- Floppy 3.5"
- LAN: 2 x 10/100/1000
- Ports: 3 x USB, 1 x serial, 2 x PCI-X
- PSU: 1/1
- Form factor: 1U
- Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
- OS: Debian Squeeze
- User logins: no
Name voting at https://members.hcoop.net/portal/poll?report=17
Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299
Real picture:
Back of hopper, taken 24feb09.jpg Hopper card closeup, taken 24feb09.jpg Inside hopper, taken 24feb09.jpg
Use: Secondary KDC, secondary openafs volume and fileserver, and SpamAssassin
(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).
Linode
outpost
- Location: Linode (hosted at UK data center)
- Model: Xen VM
- Processor: 8 cores (1x priority?)
- RAM: 1024 MB
- Disk: 40 GB
- OS: Debian wheezy
- User logins: no
Use: secondary DNS on a different subnet, all tasks requiring remote location.
Awaiting setup
None.
Awaiting purchase
We need a new KVM host and drives for staging offsite backups of openafs. See NewServerDiscussion2013
Decommissioned
See /Decommissioned for older machines