welcome: please sign in

Diff for "Hardware"

Differences between revisions 162 and 174 (spanning 12 versions)
⇤ ← Revision 162 as of 2009-09-19 18:12:58 →
Size: 8215
Editor: ClintonEbadi
Comment: added link to IBM support page for hopper
← Revision 174 as of 2012-03-15 04:59:14 → ⇥
Size: 9042
Editor: ClintonEbadi
Comment: misc updates (fritz is ... not awaiting setup since 2 years ago)
Deletions are marked like this. Additions are marked like this.
Line 11: Line 11:

== fritz ==
 * Location: Peer1
 * Model: Dell PowerEdge 2970
 * Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt
 * RAM: 8GB (4x2GB), 800MHz, Dual Ranked
 * 1x6 Backplane for 3.5-inch Hard Drives
 * Integrated SAS/SATA No RAID
 * Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1
 * Redundant Power Supply with Dual Cords
 * Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC
 * Form factor: 2U
 * OS: Debian lenny
 * User logins: no
 * Source: purchase from Dell store, 2x 1 TB disks from Newegg
'''Use: afs and kerberos kdc, kvm host'''
Line 29: Line 45:
 * DeleuzeHotSwapDrive (instructions for replacing a failed drive without rebooting)
 * [[attachment:ut_linux.html|MegaRC RAID Utility Manual]]
Line 33: Line 51:
'''Use: fileserver, database server, email server, host for all services that don't involve dynamic content provided by non-admins.''' '''Use: email server, backup server'''
Line 81: Line 99:
 * Processor: 2 x P4 XEON 2.6Ghz  * Processor: 2 x single-core P4 XEON 2.6Ghz with hyperthreading
Line 133: Line 151:
None. None. Last acquisition was Dell PowerEdge 2970, Dec 2009.

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

Contents

  1. Peer1
    1. fritz
    2. deleuze
    3. mire
    4. kvm
    5. hopper
  2. Tech.coop
    1. outpost
  3. Awaiting setup
  4. Awaiting purchase
  5. Decommissioned
    1. abulafia: shell server
    2. baltar
    3. xanadu
    4. krunk

Peer1

Current pictures of the actual Peer1 cabinet are at http://hcoop.net/~rkd/hcoop/imgs/, taken during http://wiki.hcoop.net/OnSiteVisits/20090821.

fritz

  • Location: Peer1

  • Model: Dell PowerEdge 2970

  • Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt

  • RAM: 8GB (4x2GB), 800MHz, Dual Ranked
  • 1x6 Backplane for 3.5-inch Hard Drives
  • Integrated SAS/SATA No RAID

  • Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1

  • Redundant Power Supply with Dual Cords

  • Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC

  • Form factor: 2U
  • OS: Debian lenny
  • User logins: no
  • Source: purchase from Dell store, 2x 1 TB disks from Newegg

Use: afs and kerberos kdc, kvm host

deleuze

Use: email server, backup server

mire

Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)

kvm

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

hopper

Back of hopper, taken 24feb09.jpg Hopper card closeup, taken 24feb09.jpg Inside hopper, taken 24feb09.jpg

Use: Initially, server was set up by Clinton Ebadi. It's purpose is to serve as a secondary KDC/AFS server instead of Krunk, and an email server (all email processing).

(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).

Tech.coop

outpost

  • Location: Tech.Coop (hosted at Bytemark, UK)
  • Model: Xen VM
  • Processor:
  • RAM: 512 MB
  • Disk: 40 GB RAID
  • OS: Debian stable
  • User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Awaiting setup

None.

Awaiting purchase

None. Last acquisition was Dell PowerEdge 2970, Dec 2009.

Decommissioned

abulafia: shell server

  • Processor: 1 x 900 MHz
  • RAM: 512 MB
  • Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
  • Extra: 3Ware 6400 PCI ATA RAID controller

Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted. Due to failing parts the machine was decomissioned completely and is no longer planned for reuse.

baltar

xanadu

  • Location: ???

  • Model: Dell PowerEdge 1650

  • Processor: Dual P3 1.4GHz (2/2)
  • RAM: 2 GB (?/4 slots, 4 GB Max, 72-bit ECC PC-133 SDRAM )
  • Disks (controller Ultra 160 SCSI):
    • 1 x 18 GB (1/3)
    • Floppy 3.5"
  • LAN: 2 x 10/100/1000
  • Ports: 2 x PCI-X
  • PSU: ?/2
  • Power: 100–240 VAC, 50/60 Hz, 3.9–2.0 A, 275 W (AC) per PSU
  • Form factor: 1U
  • Dimensions: W 19 in / H 1.67 in / D 26.9 in / Weight 35 lbs
  • OS:
  • User logins:

  • Source: donation by NathanKennedy

  • http://support.dell.com/support/edocs/systems/pe1650/en/index.htm

  • http://hcoop.net/~docelic/servidoresdell1650.jpg

Removed from rack in December 2008 to make space needed for servicing other machines. Server wasn't able to run with current hardware, and the board determined that it would be more effective to purchase a higher-powered server to fill our rack rather than purchase parts needed to bring Xanadu into operation.

krunk

  • Location: Peer1
  • Model: Sun Netra
  • Processor:
  • RAM:
  • Disks:
    • 2 x 200GB Unknown RPM and Manufacturer
  • Form factor: 1U?
  • OS: Debian stable?
  • User logins: no
  • Source: donation by Adam Megacz

  • KrunkInfoz

  • Real picture: http://hcoop.net/~docelic/krunk.hcoop.net.jpg

Use: was a secondary KDC and AFS server. Decomissioned after it developed problems in the hardware (as we perceived it) network stack.

Hardware (last edited 2021-04-17 15:58:03 by ClintonEbadi)