welcome: please sign in

Diff for "Hardware"

Differences between revisions 36 and 200 (spanning 164 versions)
Revision 36 as of 2006-06-27 19:57:37
Size: 11175
Comment: formatting
Revision 200 as of 2018-10-14 06:25:47
Size: 3377
Editor: ClintonEbadi
Comment: marsh is definitely intended for user logins ;)
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= New System Hardware = #pragma section-numbers off
Line 3: Line 3:
During the HCoop IRC meeting on June 24, 2006, the group decided that it would based it's new system architecture on the following pieces of hardware: This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.
Line 5: Line 5:
 * Two robust servers, one that doesn't allow normal user logins, and one that does.
 * One switch to form a LAN between these servers.
 * One serial port device, to facilitate remote access to our servers.
<<TableOfContents>>
Line 9: Line 7:
Also, it was mentioned that we should research hardware support contracts from any vendor that will be selling us equipment. = Peer1 =
Line 11: Line 9:
Additionally, group decided that the server that HCoop currently owns, Abulafia, will be brought to he.net for shell service. This will follow a necessary re-load of the OS software at a time to be determined later. Current pictures of the actual Peer1 cabinet are at [[OnSiteVisits/20130627]].
Line 13: Line 11:
This page will serve as a forum for collaborative research on the pieces of hardware that we need. == fritz ==
Line 15: Line 13:
== He.net Power/Rack Guidelines == FritzInfo
Line 17: Line 15:
I asked he.net about the type of racks they used, and asked for additional information. They told us to plan on the following:  * Location: Peer1
 * Model: Dell PowerEdge 2970
 * Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt
 * RAM: 24GB (4x2GB + 4x4GB), 800MHz, Dual Ranked
 * 1x6 Backplane for 3.5-inch Hard Drives
 * Integrated SAS/SATA No RAID
 * Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1
 * Redundant Power Supply with Dual Cords
 * Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC
 * Form factor: 2U
 * OS: Debian Squeeze
 * User logins: no
 * Source: purchase from Dell store, 2x 1 TB disks from Newegg
Line 19: Line 29:
''We have locking cabinets. Our 7U space is 12 inches tall, 19 inches wide,
and 32 inches deep. The cabinets come with front mounting posts, so don't
purchase mounting rails. If your servers are extra heavy and need
additional support, we offer rackmount shelves for a one time $60 setup
fee.''
'''Use: AndrewFileSystem fileserver, MitKerberos kdc, KernelVirtualMachine host'''
Line 25: Line 31:
We will almost definitely need this shelf for our equipment, so add on the $60 fee to our expected costs. === KVM: navajos ===
Line 27: Line 33:
''You get one outlet per 7U, so you'll need to provide a power strip for
additional machines.
 Location:: virtual machine on fritz
 Allocated Resources:: 6 processors, 6G RAM, 60G storage
 Operating System:: Debian Wheezy AMD64
 User Logins:: No
 Intended Use:: Apache hosting and dynamic web content, including HCoop web services
 Details:: ServerNavajos
Line 30: Line 40:
You can use approx 2 amps of power per 7U.'' === KVM: bog ===
Line 32: Line 42:
I asked for more information on the type of power strip:  Location:: virtual machine on fritz
 Allocated Resources:: 4 processors, 3G RAM, 30G storage
 Operating System:: Debian Wheezy AMD64
 User Logins:: Yes
 Intended Use:: Member shell and server hosting
 Details:: ServerBog
Line 34: Line 49:
''You'll just want a basic power strip. A surge protector is not
needed. We have failover UPS's that filter the power and protect against
power surges. We also have PDU's for each row of cabinets for even more
filtering.''
=== KVM: mccarthy ===
Line 39: Line 51:
According to he.net, the surge protector does not have to be rack-mountable. Anyone have $7 we can borrow? ;)  Location:: virtual machine on fritz
 Allocated Resources:: 4 processors, 2G RAM, 45G storage
 Operating System:: Debian Jessie AMD64
 User Logins:: No
 Intended Use:: Mail server
 Details:: ServerMcCarthy
Line 41: Line 58:
== Servers == = Linode =
Line 43: Line 60:
We will be purchasing two servers, which will be configured and sent to he.net for colocation. == outpost ==
Line 45: Line 62:
=== Desired Features ===  * Location: Linode (hosted at UK data center)
 * Model: Xen VM
 * Processor: 8 cores (1x priority?)
 * RAM: 1024 MB
 * Disk: 40 GB
 * OS: Debian wheezy
 * User logins: no
Line 47: Line 70:
These servers should be as redundant as possible. At this point, we cannot afford to have less than one point of failure in many areas, so we should look for the following features in our new servers: '''Use: secondary DNS on a different subnet, all tasks requiring remote location.'''
Line 49: Line 72:
 * Redundant power supplies.
 * Hardware RAID.
 * Dual CPU's, AMD seems to be a stronger option than Intel
= Digital Ocean =
Line 53: Line 74:
==== Differences Between the Servers ==== == gibran ==
Line 55: Line 76:
The admin-only server will hopefully be serving an AFS file system, which means that fancier kinds of RAID are justified there. The all-members server can get away with cheaper (and maybe even faster) solutions for local disk access.  Location:: DigitalOcean NYC3
 Allocated Resources:: 6 vCPU, 16G RAM, 320G storage. Additional block storage volume for OpenAFS `/vicepa`
 Operating System:: Debian Stretch AMD64
 User Logins:: No
 Intended Use:: Primary AndrewFileSystem fileserver and dbserver, primary MitKerberos KDC
 Details:: ServerGibran
Line 57: Line 83:
JustinLeitgeb thinks that perhaps RAID 1 would work on the all-members server, and either RAID 5 or RAID 10 on the admin server. It should be RAID 10 if we can afford it, or RAID 5 if we're shorter on cash. :) == marsh ==
Line 59: Line 85:
There may be other factors influencing different configuration choices between the servers.  Location:: DigitalOcean NYC3
 Allocated Resources:: 4vCPU, 8G RAM, 160G storage
 Operating System:: Debian Stretch AMD64
 User Logins:: Yes
 Intended Use:: Member logins
 Details:: ServerMarsh
Line 61: Line 92:
Perhaps we can get away with SATA RAID 1 on the web server -- hopefully this machine won't be IO-bound, especially if we add enough RAM later. Also, it might benefit us to get a couple of rather lightweight web servers behind a load balancer before really maxing them out, in order to have fewer single points of failure (of course, at this point we would probably also want to have two load-balancers using "heartbeats" so that they couldn't cause a prolonged system failure). == minsky ==
Line 63: Line 94:
=== Proposed Vendors and Models ===  Location:: DigitalOcean NYC3
 Allocated Resources:: 2vCPU, 4G RAM, 80G storage
 Operating System:: Debian Stretch AMD64
 User Logins:: No
 Intended Use:: Mail server and ejabberd server
 Details:: ServerMinsky
Line 65: Line 101:
[http://www.dell.com Dell] Models: == shelob ==
Line 67: Line 103:
 * Possible web server [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_web_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_web_server.pdf (PDF)], based on the Dell PowerEdge 1850 $5071.
 * Possible admin server [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_admin_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/dell_admin_server.pdf (PDF)], based on the Dell PowerEdge 2850 (offers more space for hard disks in our primary file server) $8486.
 Location:: DigitalOcean NYC3
 Allocated Resources:: 4vCPU, 8G RAM, 160G storage
 Operating System:: Debian Stretch AMD64
 User Logins:: No
 Intended Use:: Web Server
 Details:: ServerShelob
Line 70: Line 110:
Note that when I checked Dell dropped something like $1200 off of the price of each server over $4000, so we should expect some significant discounts. Whichever company we plan on going with, we may be able to negotiate lower prices by emphasizing that we may buy more in the future, etc. = Awaiting setup =
Line 72: Line 112:
[http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=M&Category_Code=allracks Monarch Computer] Models: None.
Line 74: Line 114:
[http://www.penguincomputing.com Penguin Computing] Models: = Awaiting purchase =
Line 76: Line 116:
 * Possible web server configuration hardware RAID $3463 [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_web_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_web_server.pdf (PDF)]
 * Possible admin server configuration RAID 10 1U $5321 [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_server.pdf (PDF)]
 * Possible admin server configuration, using the 2U server, redundant power supplies, and RAID 5 $4884 [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_raid5_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_raid5_server.pdf (PDF)]
 * Possible admin server configuration using the 2U server, redundant power supplies, and RAID 10 $5523 [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_raid10_server_2200.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_admin_raid10_server_2200.pdf (PDF)]
 * Possible web server configuration with SATA RAID 1, budget configuration about $2700 [http://www.hcoop.net/~leitgebj/hcoop_servers/altus_budget_web.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/altus_budget_web.pdf (PDF)]
New virtual servers, see VirtualizedHosting2018 and ServerMigration2018.
Line 82: Line 118:
With the Penguin models, we seem to have to go to the 2U, Altus 2200 in order to get a redundant power supply. = Decommissioned =
Line 84: Line 120:
== Ethernet Switch == See [[/Decommissioned]] for older machines
Line 86: Line 122:
=== Desired Features ===

 * Gigabit
 * 5 ports minimum
 * Managed - so that we can troubleshoot failed NIC's easier
 * Rack-mountable, so that vibration and heat issues are diminished.
 * SNMP monitoring capability

=== Additional Information ===

He.net sent us the following when asked about switch configurations at their site:

''We've got customers using everything from ElCheapoSwitch(tm) to Cisco-grade equipment. The main difference between the two is how much traffic they can deal with, the number of packets they can deal with, and how they can be accesses/monitored. If you're looking at pushing primarily web traffic (<50Mb/s) and do not require any of the more advanced functionality of a managed switch, you could likely just go with a good unmanaged switch. If you were doing higher traffic levels, streaming, or other such traffic which consist of a zillion little packets, especially if it's between your servers, you would be better served by something a bit higher grade.''

And from another support rep at he.net (their responsiveness has been impressive so far!):

''Depends on their needs. If they want to run MRTG, then they need a managed
switch. If they just need a switch, a netgear or linksys or d-link will
accomplish the job.

Cost differences are greater managed versus non-managed. Non-managed can
be 50-$100, whereas managed can start at about $250 and go into the
$thousands depending on model and capabilities.''

I also asked he.net about the number of ports we would need. Also got useful information about setting up a VLAN which would be useful. He.net response:

''(2 * n) + 1... where n is the number of machines you colocate.

For 3 servers, your switch would need 7 ports. 3 for the private network, 3 for the public network, and 1 for the uplink to HE.

For better control of your packets and their direction... if you're intending to do a public and private network, you might want to consider purchasing 2 smaller ElCheapoSwitches... or using a slightly more managed switch which support creating a VLAN.''


=== Proposed Models and Vendors ===

==== Vendors ====

[http://newegg.com/ Newegg] has been recommended to several of us.

==== Models ====

===== NETGEAR GS108 10/100/1000Mbps =====

[http://www.newegg.com/Product/Product.asp?Item=N82E16833122111 Netgear GS108 Switch ]: Highly-rated Netgear switch that is not rack-mountable

Price: ($56.99)

MichaelOlson thinks that we should go with the Netgear switch. It has been rated as a very reliable product, and is very affordable.

I don't like this switch for the following reasons:

 1. It is not rack-mountable, meaning that it could raise issues for cooling in the rack, and be more susceptible to shock that could reduce reliability of the switch, or jar patch cables out of the ports.

 2. It is not managed, so we can't track important information about performance and possible NIC failures via SNMP.

Basically, I think that if we're going to pay all of this money for equipment and hosting, we shouldn't put an interconnect with insufficient features in the middle of our architecture. But, I'm not a networking expert, so I would welcome any opinions contrary to this! JustinLeitgeb

===== Level One GSW-1655 10/100/1000Mbps =====

 * ($249.99) Level One 16-port rack-mountable switch [[http://www.newegg.com/Product/Product.asp?Item=N82E16833118021 link ]]

I've never heard of this brand (Level 1?) so I don't trust it. Any reviews? JustinLeitgeb

===== Dell PowerConnect 2716 =====

This is an 8-port gig switch that is web-manageable and lists for $82. I think that we could make it work, especially if I were able to write some scripts to get important data for monitoring in Nagios or rrdtool. I put the [http://www.hcoop.net/~leitgebj/hcoop_servers/pwcnt_27xx_specs.pdf specification sheet] on our web site. This switch is rack-mountable.

===== 3Com® SuperStack® 3 Switch 3812 =====

[http://www.3com.com/products/en_US/detail.jsp?tab=features&pathtype=purchase&sku=3C17401 3Com® SuperStack® 3 Switch 3812] seems to have most of the features that we need, with a bit of room to grow. Prices range from $1000 to $1500 on [http://froogle.google.com Froogle], in my experience [http://www.cdw.com CDW] is a reliable vendor. Perhaps we should make a jump and get the 24 port, which would support our use of an entire rack in the future, if the price difference is small?


== Serial Port ==

=== Desired Features ===

Is this device really necessary? For an extra $1000 - $2000, and utilization of 1U, I am not convinced that this is worth the expense. It seems that in the rare event that our machine is inaccessible from ssh we can use remote hands with he.net and put our resources elsewhere. If someone does think that this is necessary, please put a link to specific models that would be helpful, and a list of reasons why they will come in handy that would justify the additional cost and space in our rack. JustinLeitgeb

=== Proposed Models and Vendors ===

[http://www.cyclades.com/ Cyclades] was mentioned as one vendor of serial port devices which are linux-friendly.
----
CategorySystemAdministration

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

Peer1

Current pictures of the actual Peer1 cabinet are at OnSiteVisits/20130627.

fritz

FritzInfo

  • Location: Peer1
  • Model: Dell PowerEdge 2970

  • Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt

  • RAM: 24GB (4x2GB + 4x4GB), 800MHz, Dual Ranked
  • 1x6 Backplane for 3.5-inch Hard Drives
  • Integrated SAS/SATA No RAID
  • Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1

  • Redundant Power Supply with Dual Cords
  • Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC

  • Form factor: 2U
  • OS: Debian Squeeze
  • User logins: no
  • Source: purchase from Dell store, 2x 1 TB disks from Newegg

Use: AndrewFileSystem fileserver, MitKerberos kdc, KernelVirtualMachine host

KVM: navajos

Location
virtual machine on fritz
Allocated Resources
6 processors, 6G RAM, 60G storage
Operating System
Debian Wheezy AMD64
User Logins
No
Intended Use
Apache hosting and dynamic web content, including HCoop web services
Details

ServerNavajos

KVM: bog

Location
virtual machine on fritz
Allocated Resources
4 processors, 3G RAM, 30G storage
Operating System
Debian Wheezy AMD64
User Logins
Yes
Intended Use
Member shell and server hosting
Details

ServerBog

KVM: mccarthy

Location
virtual machine on fritz
Allocated Resources
4 processors, 2G RAM, 45G storage
Operating System
Debian Jessie AMD64
User Logins
No
Intended Use
Mail server
Details

ServerMcCarthy

Linode

outpost

  • Location: Linode (hosted at UK data center)
  • Model: Xen VM
  • Processor: 8 cores (1x priority?)
  • RAM: 1024 MB
  • Disk: 40 GB
  • OS: Debian wheezy
  • User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Digital Ocean

gibran

Location

DigitalOcean NYC3

Allocated Resources

6 vCPU, 16G RAM, 320G storage. Additional block storage volume for OpenAFS /vicepa

Operating System
Debian Stretch AMD64
User Logins
No
Intended Use

Primary AndrewFileSystem fileserver and dbserver, primary MitKerberos KDC

Details

ServerGibran

marsh

Location

DigitalOcean NYC3

Allocated Resources
4vCPU, 8G RAM, 160G storage
Operating System
Debian Stretch AMD64
User Logins
Yes
Intended Use
Member logins
Details

ServerMarsh

minsky

Location

DigitalOcean NYC3

Allocated Resources
2vCPU, 4G RAM, 80G storage
Operating System
Debian Stretch AMD64
User Logins
No
Intended Use
Mail server and ejabberd server
Details

ServerMinsky

shelob

Location

DigitalOcean NYC3

Allocated Resources
4vCPU, 8G RAM, 160G storage
Operating System
Debian Stretch AMD64
User Logins
No
Intended Use
Web Server
Details

ServerShelob

Awaiting setup

None.

Awaiting purchase

New virtual servers, see VirtualizedHosting2018 and ServerMigration2018.

Decommissioned

See /Decommissioned for older machines


CategorySystemAdministration

Hardware (last edited 2021-04-17 15:58:03 by ClintonEbadi)