Differences between revisions 76 and 196 (spanning 120 versions)

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

Contents

Peer1
1. fritz
Linode
1. outpost
Digital Ocean
1. gibran
2. marsh
Awaiting setup
Awaiting purchase
Decommissioned

Peer1

Current pictures of the actual Peer1 cabinet are at OnSiteVisits/20130627.

fritz

FritzInfo

Location: Peer1
Model: Dell PowerEdge 2970
Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt
RAM: 24GB (4x2GB + 4x4GB), 800MHz, Dual Ranked
1x6 Backplane for 3.5-inch Hard Drives
Integrated SAS/SATA No RAID
Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1
Redundant Power Supply with Dual Cords
Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC
Form factor: 2U
OS: Debian Squeeze
User logins: no
Source: purchase from Dell store, 2x 1 TB disks from Newegg

Use: AndrewFileSystem fileserver, MitKerberos kdc, KernelVirtualMachine host

KVM: navajos

Location: virtual machine on fritz
Allocated Resources: 6 processors, 6G RAM, 60G storage
Operating System: Debian Wheezy AMD64
User Logins: No
Intended Use: Apache hosting and dynamic web content, including HCoop web services
Details: ServerNavajos

KVM: bog

Location: virtual machine on fritz
Allocated Resources: 4 processors, 3G RAM, 30G storage
Operating System: Debian Wheezy AMD64
User Logins: Yes
Intended Use: Member shell and server hosting
Details: ServerBog

KVM: mccarthy

Location: virtual machine on fritz
Allocated Resources: 4 processors, 2G RAM, 45G storage
Operating System: Debian Jessie AMD64
User Logins: No
Intended Use: Mail server
Details: ServerMcCarthy

Linode

outpost

Location: Linode (hosted at UK data center)
Model: Xen VM
Processor: 8 cores (1x priority?)
RAM: 1024 MB
Disk: 40 GB
OS: Debian wheezy
User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Digital Ocean

gibran

Location: DigitalOcean NYC3
Allocated Resources: 6 vCPU, 16G RAM, 320G storage. Additional block storage volume for OpenAFS /vicepa
Operating System: Debian Stretch AMD64
User Logins: No
Intended Use: Primary AndrewFileSystem fileserver and dbserver, primary MitKerberos KDC
Details: ServerGibran

marsh

Location: DigitalOcean NYC3
Allocated Resources: 4vCPU, 8G RAM, 160G storage
Operating System: Debian Stretch AMD64
User Logins: No
Intended Use: Member logins
Details: ServerMarsh

Awaiting setup

None.

Awaiting purchase

New virtual servers, see VirtualizedHosting2018 and ServerMigration2018.

Decommissioned

See /Decommissioned for older machines

CategorySystemAdministration

-  ⇤ ← Revision 76 as of 2008-02-20 18:50:11 → 
  Size: 4867
  Editor: MichaelOlson
  Comment:
+   ← Revision 196 as of 2018-04-20 02:02:51 → ⇥
  Size: 2926
  Editor: ClintonEbadi
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 3:
-This page collects information on the hardware that we have installed or plan to install at Peer1 as part of our hosting infrastructure.
+This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.
 Line 5:
-[[TableOfContents()]]
+<<TableOfContents>>
 Line 7:
-= deleuze: fileserver, static HTML content =
 * Donated by: Justin Leitgeb
 * Model: Dell PowerEdge 2850
 * Processor: 2 x 2.8 GHz Intel Xeon
 * RAM: 4 GB
 * Disks:
  * 4 x 10K Seagate Cheetah SCSI drives, 73GB  '''and'''
  * 2 x 10K Seagate Cheetah SCSI drives, 36GB
 * Extra: RAID kit, with battery, etc.,  256 MB RAID cache, 2 power supplies
 * [https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp Maintenance Manual for the PE 2850]
'''Intended use:  fileserver and host for all services that don't involve dynamic content provided by non-admins. No user logins.'''
+= Peer1 =
-Line 19:
+Line 9:
-= abulafia: shell server =
 * Processor: 1 x 900 MHz
 * RAM: 512 MB
 * Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
 * Extra: 3Ware 6400 PCI ATA RAID controller
'''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.'''
+Current pictures of the actual Peer1 cabinet are at [[OnSiteVisits/20130627]].
-Line 26:
+Line 11:
-= mire: dynamic web content =
http://docs.sun.com/source/817-5248-20/index.html
http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg
 * Donated by: Ray Racine
 * Model: Sun Fire v20z
 * Processor: 1 x 1.6GHz AMD64 (Opteron)
 * RAM: 1 GB
 * Disks: 2 x 36 GB Ultra320 SCSI (hot swap)
 * 1U
 * Ultra 320 SCSI controller embedded in mainboard
 * [http://onesearch.sun.com/search/docs/index.jsp?col=docs_en&locale=en&qt=Sun+Fire+v20z Search Sun for Product Documentation, including Maintenance and Troubleshooting Manuals for Sun Fire v20z]
+==  fritz ==
-Line 38:
+Line 13:
-'''Intended use: dynamic web content and any other Internet services that involve running arbitrary code from members (including custom daemons, etc.)'''
+FritzInfo
-Line 40:
+Line 15:
-= krunk: secondary KDC and AFS server =
 * KrunkInfoz
 * Donated by: Adam Megacz
 * Model: Sun Netra
 * Processor:
 * RAM:
 * Disks:
  * 2 x 200GB Unknown RPM and Manufacturer
'''Intended use: secondary KDC and AFS server (backup) in event that the primary server (deleuze) goes down'''
+ * Location: Peer1
 * Model: Dell PowerEdge 2970
 * Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt
 * RAM: 24GB (4x2GB + 4x4GB), 800MHz, Dual Ranked
 * 1x6 Backplane for 3.5-inch Hard Drives
 * Integrated SAS/SATA No RAID
 * Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1 
 * Redundant Power Supply with Dual Cords
 * Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC
 * Form factor: 2U
 * OS: Debian Squeeze
 * User logins: no
 * Source: purchase from Dell store, 2x 1 TB disks from Newegg
-Line 50:
+Line 29:
-= Other components =
+'''Use:  AndrewFileSystem fileserver, MitKerberos kdc, KernelVirtualMachine host'''
-Line 52:
+Line 31:
-== Switch ==
We are proceeding under the assumption that we'll use ShaunEmpie's donation (see HardwareDonations), a Nortel (Baystack) 380 switch.  He says:
+=== KVM: navajos ===
-Line 55:
+Line 33:
-It is not brand new but is working. Here is [http://vpit.net/es380-guide.pdf a guide] that I was able to find to give anyone interested a more in depth view of it.
+ Location:: virtual machine on fritz
 Allocated Resources:: 6 processors, 6G RAM, 60G storage
 Operating System:: Debian Wheezy AMD64
 User Logins:: No
 Intended Use:: Apache hosting and dynamic web content, including HCoop web services
 Details:: ServerNavajos
-Line 57:
+Line 40:
-VLAN Configuration Proposal:
+=== KVM: bog ===
-Line 59:
+Line 42:
-{{{
With our new setup, I think it would be best to setup a few different
VLANs for different uses.  For anyone who is unfamiliar with the term, a
VLAN is a virtual lan.  It allows you to have completely separate networks
on the same switch.  This will allow us to setup a private network that
the public and peer1 would have no access to.  This could be handy for
database systems, NAS, backup servers, etc which you'd want to keep off
the public network.
Proposed Configuration:
VLAN 1.     Management VLAN - not used for normal traffic
VLAN 10.    Public VLAN - public/Peer1's network
VLAN 20.    Private VLAN - private subnet for inter-server traffic
For a starting point i think having ports 1-12 in VLAN 10 and ports 13-24
in VLAN 20 would be best.  The VLAN membership of a port can be changed
easily so these would not be set in stone.
The switch allows for many more VLANs than we'll ever need so if anyone
has a suggestion or need for another VLAN it would be trivial to setup.
Any questions/comments, let me know.
-Shaun}}}
ES380 AC Power Specs:
+ Location:: virtual machine on fritz
 Allocated Resources:: 4 processors, 3G RAM, 30G storage
 Operating System:: Debian Wheezy AMD64
 User Logins:: Yes
 Intended Use:: Member shell and server hosting
 Details:: ServerBog
-Line 80:
+Line 49:
- * Input current: 1.5A to 100 AC
 * Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
 * Power consumption: 150 W
 * Thermal rating: 1000 BTU/hr maximum
+=== KVM: mccarthy ===
-Line 85:
+Line 51:
-== Serial console ==
Some device to simulate local login over the Internet could be a life saver.  JustinLeitgeb mentions a special card that Dell sells that would work with his donation.
+ Location:: virtual machine on fritz
 Allocated Resources:: 4 processors, 2G RAM, 45G storage
 Operating System:: Debian Jessie AMD64
 User Logins:: No
 Intended Use:: Mail server
 Details:: ServerMcCarthy
-Line 88:
+Line 58:
-There are also some really good KVM-over-IP devices out there fairly cheap these days.  My provider has one and it works very well, although on the client side you have to use this ugly Windows ActiveX control.  I'm sure by now there are KVM-over-IP boxes that speak plain VNC.  These should be well under $500. [AdamMegacz]
+= Linode =
-Line 90:
+Line 60:
-== IP KVM ==
The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server. See [http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US manual].
+== outpost ==
-Line 93:
+Line 62:
-== Standard KVM ==
We have a standard KVM to allow remote switching between servers as maintenance requires.
+ * Location: Linode (hosted at UK data center)
 * Model: Xen VM
 * Processor: 8 cores (1x priority?)
 * RAM: 1024 MB
 * Disk: 40 GB
 * OS: Debian wheezy
 * User logins: no

'''Use:  secondary DNS on a different subnet, all tasks requiring remote location.'''

= Digital Ocean =

== gibran ==

 Location:: DigitalOcean NYC3
 Allocated Resources:: 6 vCPU, 16G RAM, 320G storage. Additional block storage volume for OpenAFS `/vicepa`
 Operating System:: Debian Stretch AMD64
 User Logins:: No
 Intended Use:: Primary AndrewFileSystem fileserver and dbserver, primary MitKerberos KDC
 Details:: ServerGibran

== marsh ==

 Location:: DigitalOcean NYC3
 Allocated Resources:: 4vCPU, 8G RAM, 160G storage
 Operating System:: Debian Stretch AMD64
 User Logins:: No
 Intended Use:: Member logins
 Details:: ServerMarsh

= Awaiting setup =

None.

= Awaiting purchase =

New virtual servers, see VirtualizedHosting2018 and ServerMigration2018.

= Decommissioned =

See [[/Decommissioned]] for older machines

----
CategorySystemAdministration

Quick Links

Search Wiki

Page Tools

Diff for "Hardware"