welcome: please sign in

Upload page content

You can upload content for the page named below. If you change the page name, you can also upload content for another page. If the page name is empty, we derive the page name from the file name.

File to load page content from
Page name
Comment
Last name of the current Debian Project Leader

Edit

OnSiteVisits / 20100130

1. Info about what was wrong

all sizes are in SECTORS=512 bytes

312500000  sda  (same layout for sdb)
1959866    sda1
15631244   sda2
294905204  sda3

15631104   md0
294904960  md1

1959864    sda1 filesystem size
294904960  md1 filesystem size = 36863120 4096-byte blocks

312496135  sector causing I/O error write (sda and sdb)
294904960  sector causing I/O error, offset from sd?3 start.

256        sectors for raid superblock (at end of device)

partition table for both sda and sdb:
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1              63     1959929      979933+  83  Linux
/dev/sda2         1959930    17591174     7815622+  fd  Linux raid autodetect
/dev/sda3        17591175   312496379   147452602+  fd  Linux raid autodetect  

=== to do ==

294904960  sector causing I/O error, offset from sd?3 start.


294904896 new target partition size (not actually going to resize)
294904640 new target filesystem size (partition size minus 256-sector superblock)
294904384 new target filesystem size (partition size minus 512 sectors for safety)
 36863048  new filesystem size, in sectors (part-512sectors)
294904704  sector minimum filesystem size to create.


resize2fs 


mdadm --grow

2. actually done to fix it this day

fsck -f /dev/md1
resize2fs /dev/md1 -p 36861840
# resized to 36861840 4Kblocks, 294894720 sectors, 147447360 KiB

mdadm --grow --size=147447360 /dev/md1

resize partition to 294894720 + 512 sectors = 294895232 sectors = 147447616 KiB
fdisk /dev/sdb
>>> u
>>> d 3
>>> n p 3 \n  +294895232
mdadm --add /dev/md1 /dev/sdb3 #NOTE a=b, b=3 in the live system
(wait for sync)

mdadm --fail /dev/md1 /dev/sdc3
mdadm --remove /dev/md1 /dev/sdc3

fdisk /dev/sd3
>>> <same>

mdadm --add /dev/md1 /dev/sdc3
(wait for sync)

reboot, and it works!


== New layout and stuff ==
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1              63     1959929      979933+  83  Linux
/dev/sda2         1959930    17591174     7815622+  fd  Linux raid autodetect
/dev/sda3        17591175   312486407   147447616+  83  Linux


New sector error:
end_request: I/O error, dev sda, sector 312486279