This is just a rough sketch for now; we will expand it soon.

These steps are listed in approximately the order in which they should be performed; please try to maintain that.

1. Out Of Band Access

All machines owned by hcoop should, if possible, have some out-of-band mechanism for:

1. Keyboard access
2. Screen access
3. Power-cycling

Functions 1+2 are typically provided by kvm.hcoop.net; assuming you plan on going with that, you should connect the server's keyboard and video to the kvm switch.

Each server has its own solution for 3, usually in the form of a "service processor". You should investigate and document the appropriate service processor settings. If the service processor requires its own IP address, you should name it foo-sp.hcoop.net where foo.hcoop.net is the name of the server.

2. Add a DNS entry for the server

Straightforward.

3. Install Debian

We use Debian. Install it.

4. Kernel Compilation

It is generally a good idea for hcoop to compile its own kernels. Regarding statically-compiled kernels, see StaticallyCompiledKernels for some opinions.

5. AFS Client

You should install the openafs-client, openafs-krb5, openafs-modules-source, openafs-dbg, openafs-doc, libopenafs-dev, fsr, and libpam-afs-session packages from /afs/hcoop.net/common/debian/. Here is a block of commands to cut and paste if you are lazy:

  apt-get install libpam-krb5 krb5-user libkrb5-dev
  cd /tmp
  scp ssh.hcoop.net:/afs/hcoop.net/common/debian/openafs/1.4.6/\*.deb      ./
  scp ssh.hcoop.net:/afs/hcoop.net/common/debian/libpam-afs-session/\*.deb ./
  scp ssh.hcoop.net:/afs/hcoop.net/common/debian/fsr/\*.deb                ./
  dpkg -i \
    openafs-client*.deb         \
    openafs-krb5*.deb           \
    openafs-modules-source*.deb \
    openafs-dbg*.deb            \
    openafs-doc*.deb            \
    libopenafs-dev*.deb         \
    fsr*.deb                    \
    libpam-afs-session*.deb

Also be sure to

  apt-get install module-assistant build-essential module-init-tools

Once these packages are installed, you will want to run

  module-assistant a-i -t openafs-modules

... assuming you compiled your own kernel and the compiled kernel tree resides in /usr/src/linux. If this is not the case, you are on your own.

If the command above completes, it will have created and installed a .deb containing the kernel module. You may need to run

  /etc/init.d/module-init-tools start

to refresh whatever module wonkery linux maintains in obscure locations. Once this is figured out (if all else fails, reboot) you should be able to

  /etc/init.d/openafs-client start

Do this and check that /afs shows up.

6. runit

The runit package is useful for launching and monitoring daemons with clean process state. This is often important when dealing with tokens and pags.

7. dnscache

You can install the dnscache package to make the server self-sufficient for dns resolution purposes (it acts as a tiny dns server just for localhost). This improves the reliability of the overall infrastructure.

There is a copy of this package in /afs/megacz.com/debian/; the author of the software recently changed its license, so it will be a standard package in the next release of debian (it may even be in etch-backports already).

Starting dnscache via runit is often a good idea; this ensures that it starts early in the boot process and that it is restarted if it dies for any reason.

8. /etc/krb5.conf

You should copy /etc/krb5.conf from deleuze to the new server. This is VERY IMPORTANT. What is NOT in this file is also almost as important as what IS in this file, so think three times before adding or removing anything.

9. configuring pam

FIXME

Mostly this consists of copying mire's /etc/pam.d/*, although it would be a good idea to state precisely which parts of that need to be copied.

10. configuring ssh to get tokens+tickets

You will need to create a "host principal" for the new server; if you are setting up server.hcoop.net, then it must have the name

   host/server.hcoop.net@HCOOP.NET

Add this principal to the KDC like this (execute these commands on the new server, as root, while holding admin tokens):

   kadmin -r HCOOP.NET
     ank -randkey host/server.hcoop.net@HCOOP.NET
     ktadd -k /etc/krb5.keytab
     quit
   chown root:root /etc/krb5.keytab
   chmod go-rwx /etc/krb5.keytab

Then these lines to /etc/ssh/sshd_config:

  GssapiKeyExchange yes
  GssapiAuthentication yes
  GSSAPICleanupCredentials no
  UsePAM yes