These steps are listed in approximately the order in which they should be performed; please try to maintain that as you add to it.

TableOfContents

List the Machine on the Wiki

Add the machine to the ["Hardware"] page.

It is a very good idea to photograph the front and back panels of the machine and put those images on the wiki page; that way remote admins and people in the data center can be sure they're talking about the same ports.

Set Up Out Of Band Access

All machines owned by hcoop should, if possible, have some out-of-band mechanism for:

1. Keyboard access
2. Screen access
3. Power-cycling

Functions 1+2 are typically provided by kvm.hcoop.net (see KvmAccess); assuming you plan on going with that, you should connect the server's keyboard and video to the kvm switch.

Each server has its own solution for 3, usually in the form of a "service processor". You should investigate and document the appropriate service processor settings. If the service processor requires its own IP address, you should name it foo-sp.hcoop.net where foo.hcoop.net is the name of the server.

Add a DNS entry for the server

Straightforward.

Install Debian

We use Debian. Install it. We should put our standard /etc/apt/sources.list here.

Compile a Kernel

It is generally a good idea for hcoop to compile its own kernels. Regarding statically-compiled kernels, see StaticallyCompiledKernels for some opinions.

Install the AFS Client

First, give our preferences to debconf:

debconf-set-selections <<\EOF
openafs-client openafs-client/thiscell string hcoop.net
openafs-client openafs-client/thiscell seen true
openafs-client openafs-client/dynroot boolean true
openafs-client openafs-client/dynroot seen true
openafs-client openafs-client/cachesize string 500000
openafs-client openafs-client/cachesize seen true
openafs-client openafs-client/cell-info string
openafs-client openafs-client/cell-info seen true
openafs-client openafs-client/run-client boolean true
openafs-client openafs-client/run-client seen true
EOF

You should install the module-assistant, build-essential, module-init-tools, openafs-client, openafs-krb5, openafs-modules-source, openafs-doc, libopenafs-dev, and kstart packages. Here is a block of commands to cut and paste if you are lazy:

apt-get install krb5-user libkrb5-dev module-init-tools kstart sudo \
        module-assistant build-essential  bison flex debhelper
mkdir -p /tmp/openafs-packages
cd /tmp/openafs-packages
scp ssh.hcoop.net:/afs/hcoop.net/common/debian/openafs/1.4.6/\*.deb      ./
dpkg -i \
    openafs-client*.deb         \
    openafs-krb5*.deb           \
    openafs-modules-source*.deb \
    openafs-doc*.deb            \
    libopenafs-dev*.deb         
cd /tmp
rm -rf /tmp/openafs-packages

Once these packages are installed, you will want to run

  module-assistant a-i -t openafs-modules

... assuming you compiled your own kernel and the compiled kernel tree resides in /usr/src/linux. If this is not the case, you are on your own.

If the command above completes, it will have created and installed a .deb containing the kernel module. You may need to run

  /etc/init.d/module-init-tools start

to refresh whatever module wonkery linux maintains in obscure locations. Once this is figured out (if all else fails, reboot) you should be able to

  /etc/init.d/openafs-client start

Do this and check that /afs shows up.

Install Packages

Now that afs is up, you can easily install packages. The block of commands below installs the set of packages which must be on every hcoop server (this list will be expanded as necessary).

dpkg -i /afs/hcoop.net/user/m/me/megacz/public/libnss-afs/libnss-afs*.deb
dpkg -i /afs/hcoop.net/common/debian/libpam-afs-session/*.deb
dpkg -i /afs/hcoop.net/common/debian/libpam-krb5/*.deb
dpkg -i /afs/megacz.com/debian/fsr*.deb
dpkg -i /afs/megacz.com/debian/krb5-user/{krb5-user,libk}*.deb

The first three packages are explained below; the fourth one is the fsr command (recursive "fs"). The last line installs a fixed version of kadmin which understands DNS entries.

Install Network Time Protocol Daemon

Kerberos and AFS will not work correctly unless the clocks of the client and server are synchronized to within a certain tolerance. Therefore, it is important for us to have a daemon running that keeps the clock set properly. This step is not optional.

  apt-get install ntp

Install LDAP Support

Logins etc. will not work correctly unless libpam-ldap is installed and configured:

  apt-get install libpam-ldap

Debconf answers:

debconf-set-selections <<\EOF
libpam-ldap     shared/ldapns/base-dn   string  dc=hcoop,dc=net
libpam-ldap     shared/ldapns/ldap-server       string  ldap://69.90.123.67/
libpam-ldap     libpam-ldap/pam_password        select  exop
libpam-ldap     libpam-ldap/rootbinddn  string  cn=admin,dc=hcoop,dc=net
libpam-ldap     libpam-ldap/dbrootlogin boolean true
libpam-ldap     libpam-ldap/override    boolean true
libpam-ldap     shared/ldapns/ldap_version      select  3
libpam-ldap     libpam-ldap/dblogin     boolean false
EOF

You will also need to know LDAP admin password; see /etc/pam_ldap.secret on one of existing servers and re-type the password into the password prompt.

Configure Kerberos

VERY IMPORTANT: put exactly the following in /etc/krb5.conf -- no more, no less

[libdefaults]
        default_realm = HCOOP.NET
        kdc_timesync = 1
        forwardable = true
        proxiable = true
[logging]
        default = FILE:/proc/self/fd/2

We distribute our Kerberos configuration via DNS, so it is very important that we do not "hardwire" the settings on any of the servers (except the KDCs themselves). If we did, we wouldn't notice at first, but strange problems would crop up as soon as the DNS settings were changed. So, it is important that we put only the bare minimum amount of information in krb5.conf.

Configure Name Service

A "name service" is Linux's mechanism for answering these queries:

1. the userid for a given username and vice versa
2. the groupid for a given groupname and vice versa
3. the home directory for a user
4. the shell for a user
5. what groups a user is in

The libnss-afs package lets linux use the AFS user database (the ptserver or protection server) as a name service and makes PAGs show up as a special group. To enable these changes, edit /etc/nsswitch.conf and change the passwd and group lines to look like this:

passwd:  afs files
group:   afs files
shadow:  files

Install Name Service Caching Daemon

It is highly recommended to install nscd in order to get good performance out of libnss-afs.

  apt-get install nscd

Unfortunately there is a grevious bug in the DNS caching mechanism in etch's nscd (see [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=467609 this]); so we must disable it until it is fixed. To do this, edit /etc/nscd.conf and change the line

  enable-cache  hosts no

We prefer to run nscd as a runit service so that it does not go down (except on deleuze, where it must be started strictly after AFS in the boot sequence).

  apt-get install runit
  mkdir /var/service/nscd
  cat <<EOF > /var/service/nscd/run
#!/bin/sh                                                                       
exec nscd -d
EOF
  mkdir /var/service/nscd/log
  cat <<EOF > /var/service/nscd/log/run
#!/bin/bash                                                                     
svlogd -tt /var/log/nscd/
EOF
  mkdir /var/log/nscd
  chmod +x /var/service/nscd/log/run
  chmod +x /var/service/nscd/run

  dpkg-divert --rename /etc/init.d/nscd
  ln -s /usr/bin/sv /etc/init.d/nscd

Configure PAM

PAM is Linux's mechanism to do the following:

1. decide if somebody is who they say they are (authentication; in our case via kerberos)

2. set up sessions (in the case of AFS, this means creating PAGs)

3. change passwords (in our case, changing the password in the KDC)

Here's the usual PAM setup:

/etc/pam.d/common-account:

account sufficient      pam_unix.so
account required        pam_ldap.so
account required        pam_krb5.so debug

# temporary line for emergencies
#account required       pam_unix.so

account required pam_access.so

/etc/pam.d/common-auth:

auth    sufficient        pam_krb5.so debug forwardable ignore_root
auth    optional          pam_afs_session.so program=/usr/bin/aklog debug
auth    required          pam_unix.so nullok_secure try_first_pass

# temporary line for emergencies
#auth   required          pam_unix.so nullok_secure

auth    required          pam_env.so

/etc/pam.d/common-password:

password sufficient pam_krb5.so 
password required   pam_unix.so nullok obscure min=4 max=8 md5 shadow try_first_pass

/etc/pam.d/common-session:

session requisite pam_limits.so
session required  pam_unix_session.so      # Unix module just logs access
session optional  pam_krb5.so
session optional  pam_afs_session.so program=/usr/bin/aklog debug

/etc/pam.d/login (Add to beginning of file):

auth       required pam_listfile.so item=user sense=allow file=/etc/login.restrict  onerr=succeed

/etc/pam.d/ssh (Add just before @include common-auth line):

# sshd does not consult the "auth" section of pam when
# GssapiAuthentication=yes, even if UsePAM=yes.  Therefore, we add the
# check to the "account" section as well.
account    requisite    pam_listfile.so item=user sense=allow file=/etc/login.restrict onerr=succeed
auth       requisite    pam_listfile.so item=user sense=allow file=/etc/login.restrict onerr=succeed

If the machine is intended for user logins, DO NOT create /etc/login.restrict. If the machine is only intended for admin logins, then create the file /etc/login.restrict with the following contents:

adamc_admin
docelic_admin
megacz_admin
mwolson_admin
ntk_admin

Configure SSH

Configure SSH Client

Insert these lines in /etc/ssh/ssh_config so that outbound ssh connections will always try to use Kerberos if available:

  Host *
    GSSAPIAuthentication yes
    GSSAPIDelegateCredentials no

Configure SSH Server

You will need to create a "host principal" for the new server; if you are setting up server.hcoop.net, then it must have the name

   host/server.hcoop.net@HCOOP.NET

Add this principal to the KDC like this (execute these commands on the new server, as root, while holding admin tickets):

   REALM=HCOOP.NET
   ADMIN=myself_admin       # your admin username
   SERVER=server.hcoop.net
   rm -f /etc/krb5.keytab   # important -- if it already exists the new key will merely be appended
   kadmin -p $ADMIN@$REALM -r $REALM -q "ank -randkey host/$SERVER@$REALM"
   kadmin -p $ADMIN@$REALM -r $REALM -q "ktadd -k /etc/krb5.keytab host/$SERVER@$REALM"
   chown root:root /etc/krb5.keytab
   chmod go-rwx /etc/krb5.keytab

Then add these lines to the bottom of /etc/ssh/sshd_config:

  GssapiKeyExchange yes
  GssapiAuthentication yes
  GSSAPICleanupCredentials yes

Finally, restart the ssh server:

  /etc/init.d/ssh restart

Populate sudoers

Don't forget to give all of the admins lines in /etc/sudoers. Each line should look like:

  user_admin  ALL=(ALL) NOPASSWD: ALL

Set Up Some Cron Scripts

/etc/cron.daily/hcoop-clean-tmp:

#
# Clean /tmp periodically.
#
# Edit $TMPTIME in /etc/default/rcS to change the maximal age of /tmp entries
# before they are removed.

exec /afs/hcoop.net/common/etc/scripts/hcoop-clean-tmp

Optional Steps

Performance-Tune the OpenAFS Client

FIXME: AdamM needs to fill this in

runit

The runit package is a mechanism for starting, stopping, and monitoring daemons. It is an alternative to the traditional /etc/init.d and start-stop-daemon scheme. Its chief advantages are:

1. It launches daemons with clean process state; the daemon inherits nothing from the administrator invoking the start/stop command because the daemon is not forked as a child of the administrator's shell (rather, a request is sent runit daemon asking it to fork the daemon). This is very important when dealing with tokens and pags.

2. Runit monitors the processes that it forks, and restarts them if they die.
3. Runit eliminates the need for pidfiles and the associated risk of starting multiple copies of a daemon.

4. Runit captures the daemon's stdout and either sends it to a logger (if specified) or else displays it in the process name (output of ps)

   apt-get install runit

When you move a process from /etc/init.d/ control to runit supervision, you should inform debian that you have done so:

  # assuming /var/service/$SERVICE/run is the runit script
  dpkg-divert --rename /etc/init.d/$SERVICE
  ln -s /usr/bin/sv /etc/init.d/$SERVICE

This will cause invocations of /etc/init.d/script {start|stop}  to do "the right thing".

dnscache

You can install the dnscache package to make the server self-sufficient for dns resolution purposes (it acts as a tiny dns server just for localhost). This improves the reliability of the overall infrastructure. There is a copy of this package in /afs/megacz.com/debian/dnscache/; the author of the software recently changed its license, so it will be a standard package in the next release of debian (it may even be in etch-backports already; when it is, this paragraph should be updated to recommend that instead).

Starting dnscache via runit is often a good idea; this ensures that it starts early in the boot process and that it is restarted if it dies for any reason.

Here are the instructions for configuring it. Make sure that bind is only listening to 127.0.0.1 and the public IP address of the machine. We tell dnscache to listen on 127.0.0.2 so as to avoid conflicts with bind.

  dpkg -i /afs/megacz.com/debian/dnscache/dnscache*.deb
  sv stop dnscache
  mv /var/dnscache/root/ip/127.0.0.1 /var/dnscache/root/ip/127.0.0.2

Then edit /var/service/dnscache/run and change:

IP=127.0.0.1 \ 

to:

IP=127.0.0.2 \

Start dnscache:

  sv start dnscache

Then modify /etc/resolv.conf, replacing the nameserver lines with:

nameserver 127.0.0.2

ssmtp

Life is simpler when you run ssmtp. You can direct the mail stream either to deleuze (preferred) or to a copy of exim running locally (but why bother running it?).

nitpicks

1. Debian's installer seems to want to put an entry for the machine's own hostname in /etc/hosts, resolving to 127.0.0.1. You'll probably want to remove it.