welcome: please sign in

Diff for "Hardware"

Differences between revisions 51 and 185 (spanning 134 versions)
Revision 51 as of 2006-07-06 15:19:28
Size: 4531
Editor: ShaunEmpie
Comment: Added vlan proposal to switch section
Revision 185 as of 2014-04-15 18:00:07
Size: 6749
Editor: ClintonEbadi
Comment: we have a linode 1024 now (free upgrade), and OutpostInfo was nothing but lies
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
This page collects information on the hardware we plan to install at a colocation provider as part of our new hosting infrastructure. Some older discussion and similar stuff is on NewSystemHardwareArchive. #pragma section-numbers off
Line 3: Line 3:
= System setup =
Currently, what we know are the uses for the three machines we will base our infrastructure on. We also know our Abulafia machine configuration, and Justin Leitgeb's to-be-donated server configuration. What we need to come up with, is the ideal setup for the third machine that we will have to buy. So, the machine configurations and intended uses follow:
This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.
Line 6: Line 5:
== Justin Leitgeb's donation: Dell PowerEdge 2850 ==
 * Processor: 2 x 2.8 GHz
 * RAM: 4 GB
 * Disks:
<<TableOfContents>>

= Peer1 =

Current pictures of the actual Peer1 cabinet are at [[OnSiteVisits/20130627]].

== fritz ==

FritzInfo

 * Location: Peer1
 * Model: Dell PowerEdge 2970
 * Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt
 * RAM: 8GB (4x2GB), 800MHz, Dual Ranked
 * 1x6 Backplane for 3.5-inch Hard Drives
 * Integrated SAS/SATA No RAID
 * Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1
 * Redundant Power Supply with Dual Cords
 * Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC
 * Form factor: 2U
 * OS: Debian Squeeze
 * User logins: no
 * Source: purchase from Dell store, 2x 1 TB disks from Newegg

'''Use: AndrewFileSystem fileserver, MitKerberos kdc, KernelVirtualMachine host'''

=== KVM: navajos ===

 Location:: virtual machine on fritz
 Allocated Resources:: 4 processors, 2.5G RAM, 60G storage
 Operating System:: Debian Squeeze AMD64
 User Logins:: No
 Intended Use:: Apache hosting and dynamic web content, including HCoop web services
 Details:: ServerNavajos

=== KVM: bog ===

 Location:: virtual machine on fritz
 Allocated Resources:: 4 processors, 3G RAM, 30G storage
 Operating System:: Debian Squeeze AMD64
 User Logins:: No
 Intended Use:: Member shell and server hosting
 Details:: ServerBog
 

== deleuze ==
 * Location: Peer1
 * Model: Dell PowerEdge 2850
 * Processor: 2 x 2.8 GHz Intel Xeon (2/2)
 * RAM: 4 GB (? slots, 16 GB Max, DDR-2400 SDRAM)
 * Disks (controller Ultra 320 SCSI):
Line 12: Line 58:
 * LAN: 2 x 10/100/1000
Line 13: Line 60:
'''Intended use: fileserver and host for all services that don't involve dynamic content provided by non-admins. No user logins.'''  * Form factor: 2U
 * OS: Debian stable
 * User logins: no
 * Source: donation by Justin Leitgeb
Line 15: Line 65:
== HCoop's currently-underused machine Abulafia ==
 * Processor: 1 x 900 MHz
 * RAM: 512 MB
 * Disks: 40 GB RAID 1 (2 x 40 GB 7200 RPM ATA drives)
 * Extra: 3Ware 6400 PCI ATA RAID controller
'''Intended use: refurbished slightly to serve as a generic shell server and the only machine where usage not strictly related to "Internet hosting" is permitted.'''
 * [[https://dcse.dell.com/selfstudy/Associates_7_0/Enterprise/PowerEdge/PE2850/printer_friendly.asp|Maintenance Manual for the PE 2850]]
 * http://www.dell.com/downloads/global/products/pedge/en/2850_specs.pdf
 * DeleuzeHotSwapDrive (instructions for replacing a failed drive without rebooting)
 * [[attachment:ut_linux.html|MegaRC RAID Utility Manual]]
 * Real picture:{{http://hcoop.net/~docelic/deleuze.hcoop.net.jpg}}
 * Historical discussion: PowerEdge2850, RebootingDeleuze
Line 22: Line 72:
== New server, for which we need to come up with hardware specifications ==
 * Processor: Dual AMD 248
 * RAM: 2 GB RAM
 * Disks: 2 x 73 RAID 1 SCSI
 * Extra: Should be 1U. Goal is to make it processor intensive, and only disk-heavy enough to ensure a high level of uptime. Other considerations such as a preference for AMD and the vendor Penguin Computing that have been expressed on the list and in meetings should be followed here.
'''Intended use: dynamic web content and any other Internet services that involve running arbitrary code from members (including custom daemons, etc.)'''
'''Use: email server, backup server'''
Line 29: Line 74:
JustinLeitgeb says:
Line 31: Line 75:
 . The model that I like best for this machine of the previous configurations is the Penguin Altus 1400. It is a 1U machine with hardware SCSI RAID listing for $3463 [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_web_server.ps (postscript)] [http://www.hcoop.net/~leitgebj/hcoop_servers/penguin_web_server.pdf (PDF)][[BR]]
 We could go with SATA, but I would only do this if we can do it with hot-swappable disks in a 1U case. I suppose that SATA could be a better choice even if it isn't hot-swappable once we get a cluster of web servers... maybe we can get SATA now and live with the consequences until we reach this point. Ideas?[[BR]] I think that we should also negotiate with Penguin on the phone over this configuration.
== Switch ==
We are proceeding under the assumption that we'll use ShaunEmpie's donation (see HardwareDonations), a Nortel (Baystack) 380 switch. He says:
== kvm ==
Line 36: Line 77:
It is not brand new but is working. Here is [http://vpit.net/es380-guide.pdf a guide] that I was able to find to give anyone interested a more in depth view of it.  * Location: Peer1
 * Model: StarTech IP KVM
 * Source: Newegg?
Line 38: Line 81:
VLAN Configuration Proposal:  * [[KvmAccess]]
 * [[http://www.startech.com/Data/ProductManuals/SV1110IPEXT.pdf?c=US|StarTech manual]] ([[http://hcoop.net/~docelic/SV1110IPEXT.pdf|local copy]]).
Line 40: Line 84:
{{{
With our new setup, I think it would be best to setup a few different
VLANs for different uses. For anyone who is unfamiliar with the term, a
VLAN is a virtual lan. It allows you to have completely separate networks
on the same switch. This will allow us to setup a private network that
the public and peer1 would have no access to. This could be handy for
database systems, NAS, backup servers, etc which you'd want to keep off
the public network.
Proposed Configuration:
VLAN 1. Management VLAN - not used for normal traffic
VLAN 10. Public VLAN - public/Peer1's network
VLAN 20. Private VLAN - private subnet for inter-server traffic
For a starting point i think having ports 1-12 in VLAN 10 and ports 13-24
in VLAN 20 would be best. The VLAN membership of a port can be changed
easily so these would not be set in stone.
The switch allows for many more VLANs than we'll ever need so if anyone
has a suggestion or need for another VLAN it would be trivial to setup.
Any questions/comments, let me know.
-Shaun}}}
ES380 AC Power Specs:
The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.
Line 61: Line 86:
 * Input current: 1.5A to 100 AC
 * Input voltage (rms): 100 to 240 VAC at 47 to 63 Hz
 * Power consumption: 150 W
 * Thermal rating: 1000 BTU/hr maximum
== Serial console ==
Some device to simulate local login over the Internet could be a life saver. JustinLeitgeb mentions a special card that Dell sells that would work with his donation.

== hopper ==

 * Location: Peer1
 * Model: IBM xSeries 335
 * Processor: 2 x single-core P4 XEON 2.6Ghz with hyperthreading
 * RAM: 4 GB, 2x1 GB, 1x2 GB (3/4 slots, 8 GB Max, PC2100 ECC registered)
 * Disks:
  * 2x SCSI Ultra 320 80 pin. SEAGATE - 5 YEARS MFG WARRANTY. CHEETAH 73.4GB 15000 RPM 80PIN ULTRA320 SCSI HARD DISK DRIVE. 16MB BUFFER 3.5 LOW PROFILE(1.0 INCH). ST373455LC
  * Floppy 3.5"
 * LAN: 2 x 10/100/1000
 * Ports: 3 x USB, 1 x serial, 2 x PCI-X
 * PSU: 1/1
 * Form factor: 1U
 * Dimensions: W 17.5 in / H 1.75 in / D 25.75 in / Weight 33 lbs
 * OS: Debian Squeeze
 * User logins: no
 * Name voting at https://members.hcoop.net/portal/poll?report=17
 * Source: US Ebay, seller lapkosoft. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300200776299
 * Real picture:{{http://hcoop.net/~docelic/hopper.hcoop.net.jpg}}

 * [[HopperServiceProcessor]]
 * [[http://www-947.ibm.com/systems/support/supportsite.wss/selectproduct?familyind=5105587&typeind=0&osind=0&continue.x=12&continue.y=13&brandind=5000008&oldbrand=5000008&oldfamily=5105587&oldtype=0&taskind=2&matrix=Y&psid=bm|IBM xSeries 335 Support Page]]
 * {{http://hcoop.net/~docelic/IBM_xSeries335_Front_0Bay.jpg}}

[[attachment:Back of hopper, taken 24feb09.jpg]]
[[attachment:Hopper card closeup, taken 24feb09.jpg]]
[[attachment:Inside hopper, taken 24feb09.jpg]]


'''Use: Secondary KDC and SpamAssassin'''

(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).


= Linode =

== outpost ==

 * Location: Linode (hosted at UK data center)
 * Model: Xen VM
 * Processor: 8 cores (1x priority?)
 * RAM: 1024 MB
 * Disk: 40 GB
 * OS: Debian squeeze
 * User logins: no

'''Use: secondary DNS on a different subnet, all tasks requiring remote location.'''


= Awaiting setup =

None.

= Awaiting purchase =

We need a new KVM host and drives for staging offsite backups of openafs. See NewServerDiscussion2013


= Decommissioned =

== mire ==

{{{#!wiki note
Turned off, left in rack in case we end up re-using it as a wheezy based console server
}}}

 * Location: Peer1
 * Model: Sun Fire v20z
 * Processor: 1 x 1.6GHz AMD64 (Opteron) (1/2)
 * RAM: 5 GB (initial 2x512MB and additional 2x2GB, ? slots, 16 GB Max, DDR1/333 or DDR1/400 SDRAM)
 * Disks (controller Ultra 320 SCSI):
  * 2 x 36 GB (hot swap)
  * CD-Rom
  * Floppy
 * LAN: 2 x 10/100/1000
 * Form factor: 1U
 * Ports: 1 x USB 1.1, 1 x DB9 serial, 2 x PCI-X
 * Power: 100-240 V, 50/60 Hz, 465 W PFC supply, dual redundant fans
 * Dimensions: W 16.94 in / H 1.69 in / D 28.5 in / Weight 35 lbs
 * OS: Debian stable
 * User logins: yes
 * Source: donated by Ray Racine

 * [[RebootingMireSp]]
 * [[http://docs.sun.com/source/817-5248-21/|SunFire v20z User Guide]]
 * [[http://docs.sun.com/source/817-5249-17/|Service Processor Manual]]
 * http://docs.sun.com/source/817-5248-20/index.html
 * http://www.sun.com/servers/entry/v20z/index.jsp
 * {{http://hcoop.net/~docelic/sunFIRE_V20z.jpg}}
 * {{http://www.sun.com/servers/entry/v20z/images/gallery/full/img_3.jpg}}
 * {{http://hcoop.net/~docelic/SunFireV20z_expl.gif}}
 * Real picture:{{http://hcoop.net/~docelic/mire.hcoop.net.jpg}}

'''Former Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)'''


See [[/Decommissioned]] for older machines

----
CategorySystemAdministration

This page collects information on the hardware that we have installed or plan to install as part of HCoop infrastructure.

Peer1

Current pictures of the actual Peer1 cabinet are at OnSiteVisits/20130627.

fritz

FritzInfo

  • Location: Peer1
  • Model: Dell PowerEdge 2970

  • Processor: 2x Quad Core AMD Opteron™ 2372HE 2.1GHz 4x512K Cache 1Ghz HyperTrnsprt

  • RAM: 8GB (4x2GB), 800MHz, Dual Ranked
  • 1x6 Backplane for 3.5-inch Hard Drives
  • Integrated SAS/SATA No RAID
  • Disks: system disks 2x 160GB 7.2K RPM Serial ATA 3Gbps 3.5-in HotPlug Hard Drive , + AFS disks 2x 1 TB Western Digital in RAID 1

  • Redundant Power Supply with Dual Cords
  • Lan: Dual Embedded Broadcom® NetXtreme II 5708 Gigabit Ethernet NIC

  • Form factor: 2U
  • OS: Debian Squeeze
  • User logins: no
  • Source: purchase from Dell store, 2x 1 TB disks from Newegg

Use: AndrewFileSystem fileserver, MitKerberos kdc, KernelVirtualMachine host

KVM: navajos

Location
virtual machine on fritz
Allocated Resources
4 processors, 2.5G RAM, 60G storage
Operating System
Debian Squeeze AMD64
User Logins
No
Intended Use
Apache hosting and dynamic web content, including HCoop web services
Details

ServerNavajos

KVM: bog

Location
virtual machine on fritz
Allocated Resources
4 processors, 3G RAM, 30G storage
Operating System
Debian Squeeze AMD64
User Logins
No
Intended Use
Member shell and server hosting
Details

ServerBog

deleuze

Use: email server, backup server

kvm

The StarTech Server Remote Control External KVM over IP provides access to systems that may have a degraded network. It allows us to monitor Power-On Self Test (POST), configure BIOS/CMOS, and even reinstall operating system software. It must be connected to another multiple port KVM in order to have access to more than one server.

hopper

Back of hopper, taken 24feb09.jpg Hopper card closeup, taken 24feb09.jpg Inside hopper, taken 24feb09.jpg

Use: Secondary KDC and SpamAssassin

(The 1x2 GB RAM module was acquired from Newegg, and the two disks from ServerSupply. Purchases were made in Sep 2008, but ServerSupply took good 3 weeks to deliver).

Linode

outpost

  • Location: Linode (hosted at UK data center)
  • Model: Xen VM
  • Processor: 8 cores (1x priority?)
  • RAM: 1024 MB
  • Disk: 40 GB
  • OS: Debian squeeze
  • User logins: no

Use: secondary DNS on a different subnet, all tasks requiring remote location.

Awaiting setup

None.

Awaiting purchase

We need a new KVM host and drives for staging offsite backups of openafs. See NewServerDiscussion2013

Decommissioned

mire

Turned off, left in rack in case we end up re-using it as a wheezy based console server

Former Use: dynamic web content, services that involve running arbitrary code from members (including custom daemons, etc.)

See /Decommissioned for older machines


CategorySystemAdministration

Hardware (last edited 2021-04-17 15:58:03 by ClintonEbadi)