welcome: please sign in

Diff for "AdminArea"

Differences between revisions 70 and 160 (spanning 90 versions)
Revision 70 as of 2007-04-29 16:04:35
Size: 6011
Editor: AdamChlipala
Comment: Link OneTimeCosts2007
Revision 160 as of 2012-03-25 05:38:33
Size: 5058
Editor: ClintonEbadi
Comment: creating a new page to store quick links to openafs/kerberos/whatever manuals
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= Introduction = #pragma section-numbers off
Line 3: Line 3:
[[TableOfContents]] = Admin Area =
Line 5: Line 5:
= Final preparations = Links to detailed policies, procedures and information specific to HCoop. The resources here should allow HCoop admin team members to share information about every part of the complete system, and to allow easier training of future team members.
Line 7: Line 7:
See page NewServersSetup/FinalPreparations. From my experience, I would recommend longer pages, instead of dividing a topic into lots of subpages. When there are too many subpages, I've found that some will be updated, and some will fall out of date. (Of course, use your judgment here.)
Line 9: Line 9:
= Special topic pages about migration and new set-up = Admins: it is recommended that you watch the changes [[http://wiki.hcoop.net/RecentChanges?action=rss_rc&diffs=1&ddiffs=1|RSS feed]] to keep informed of what everyone is up to. Then, please document all of your work on here somewhere - that way we will not only have a record, but everyone gets notified about what is going on. Alternatively, you can create a wiki account and subscribe to the page regex `.*` (all pages).
Line 11: Line 11:
 * AndrewFileSystem: Using our new shared filesystem
 * DaemonAdmin: Daemon-specific pages aimed at admins
 * DomTool: Administering and using the new domtool
 * NewSystemHardware: Information on the new hardware
 * TaskDistribution: What each sysadmin is responsible for
 * SoftwareArchitecturePlans: Plans for software installation
 * SystemArchitecturePlans: Plans regarding our hardware
 * OneTimeCosts2007: Costs associated with the new servers through April 2007

The following are outdated:

 * ColocationNextSteps: Listing of things to do after getting the hardware.

= To-do list =

== Before beginning to migrate members ==

 * Unclaimed
    * Mailman
 * Megacz
    * Make /afs/hcoop.net/common/etc/scripts/apache-sync-logs work
 * MWolson
    * Perform testing on procmail and exim filter on deleuze.
    * Migrate site-specific (read: non-AFS) changes to apache 1.X on mire.
    * Double-check to see that I made exim on mire deliver mail to
      deleuze. Should be trivial, so someone may preempt me on this if
      they like.
<<TableOfContents>>
Line 41: Line 15:
== To be an admin ==
Sections you should read if you are interested in being an admin.
Line 42: Line 18:
=== Misc ===
 * Make ca@hcoop.net e-mail address working. It's the address that will be used in the certificate files.
 * Make sure somebody is reading mail sent to abuse@hcoop.net so we don't wind up on lame DNSBLs
 * Fix resolv.conf on both servers to have multiple good DNS servers for now, set it to use localhost once BIND is running and configured.
 * Figure out how to use Dell OMSA or other tools to monitor RAID and other hardware.
 * Configure Exim on mire to use deleuze as a smarthost. --MichaelOlson
 * Do performance testing on the new configuration, by having admins or other users monitor performance on mire (using vmstat, top, mytop, etc) and having one or more (perhaps multi-threaded) scripts requesting web pages from somewhere off of the Peer 1 network.
 * TipsAndTricks
Line 50: Line 20:
== During migration == === Admins and Admin Responsibilities ===
 * TaskDistribution: What each sysadmin is responsible for.
 * VolunteerResponsePolicy: Guidelines for responding to requests and email.
 * AdminArea/ListOfVolunteers who can help us do stuff...
 * AdminGroup: Listing of people who can delete pages and despam pages on the wiki.
 * AddingNewAdmins: Documented procedures for adding new admin accounts
Line 52: Line 27:
 * Watchdog process to kill resource hogs
 * Migrate ejabberd mnesia db just before the dns switchover.
 * Set up back-up regime, possibly using [http://rsync.net/ rsync.net].
 * Get miscellaneous web stuff ported, like membership application, vmail password change, publicly-viewable statistics on membership, bandwidth usage stats, ....
=== Introductory material ===
Line 57: Line 29:
= Global Notes = Refer to documentation of each of the listed components. The information in our Wiki pages covers only the most basic principles, and quickly focuses on HCoop-specific setup, assuming skillset with the technology.
Line 59: Line 31:
 * To edit LDAP database from a GUI tool, use ''gq'' program
 * To connect to hcoop's ldap server using ''gq'', create a SSH tunnel: ''' ssh -p 2222 -f -N -L 389:localhost:389 USERNAME@69.90.123.67''', and then connect to ''localhost:389'' in ''gq''.
 * For the description of the actual authentication scheme, see AuthenticationScheme.
 * DaemonFileSecurity
 * DomTool
 * AuthenticationScheme
 * [[OpenLDAP]]
 * MitKerberos
 * AndrewFileSystem
 * EtcKeeper
 * [[Code]] - Details of HCoop-specific code kept in git.hcoop.net
 * DaemonDocumentation - Quick links to canonical documentation for our core services
Line 63: Line 41:
= Tasks done = == Planning and Records ==
Line 65: Line 43:
== Deleuze ==  * ToDo: Both short term and longer term meta-planning.
 * [[Migration2009]]
   * [[Migration2009/SoftwareSetup]]
   * Migration2010Notes: Notes about the new server setup and way to transfer over old data
Line 67: Line 48:
This machine donated by Justin Leitgeb seems real nice. Buffered disk throughput is about 1.5 GB/s. Raw disk reads are 60 MB/s for the two 36 GB disks and 120 MB/s for the 4-disk array. Not bad at all. === Technical Records ===
 * IpAddresses: Listing of IPs that we use.
 * [[Hardware]]: Information on HCoop hardware.
 * HcoopAddresses: Physical addresses relevant to us.
 * OnSiteVisits: Records of visits by HCoop volunteers to our colocation facilities
Line 69: Line 54:
 * Removed excessive packages, cleaned up the system
 * Installed ''changetrack'' to monitor all config file changes. The program uses ''rcs'' and automatically keeps previous revisions. It is ran from ''cron'' on a daily basis.
 * Installed ''debsums'' to monitor file md5sums
 * Installed Courier IMAP and IMAP-SSL
 * Installed LDAP for user authentication. The system is currently configured to use LDAP and fallback to the usual ''/etc/'' files. Admin users will be added locally on all machines and will be able to log in even when LDAP is not operational.
 * Installed MIT Kerberos 5
 * Fixed date/time on the system. Installed ''ntpd''
 * Installed TLS support for LDAP. Certificate file is ''/etc/ldap/server.pem'', and ldap/ldaps ports are 389/636.
 * Installed Linux 2.6.18.3-grsec with 2.6.18-mm3 patches (2) for megaraid.
  * The patches and source tree installed, along with the .deb generated, is under /usr/src/ntk2. I set up sockets groups as on fyodor (7070-7072). SMP, with hyperthreading enhancements, is enabled. I also installed a bunch of packages that someone were uninstalled while I was gone (e.g., gcc). I also fixed the sudoers, wheel group, and admin home directories. --NathanKennedy
 * Kerberos + LDAP works.
 * Compiled requisite kernel modules, compiled and installed new OpenIPMI package, and installed dellomsa. Dell OMSA is now working. --NathanKennedy
 * Install SSH.
 * Permit new admins to log in by copying their SSH keys to their newly-created (empty) home directories.
 * Install AFS (need to repeat the reading on AFS and how it really works. Also it will influence the decision how to format ''/dev/sdb'' in the system) -- DavorOcelic
 * Install MySQL and PostgreSQL (input from AFS step and admin discussion needed to see how to exactly configure this).
 * Install BIND.
 * Install and configure Apache, to serve static web content only. --MichaelOlson
 * Review kernel configuration and install testnet. -- DavorOcelic
 * Configure exim4. --MichaelOlson
 * Configure Courier IMAP daemons, reviewing fyodor's config. --MichaelOlson
 * Migrate squirrelmail configuration settings from fyodor.
 * Configure Squirrel``Mail to use imapproxyd, which should give speed improvements once we migrate to deleuze. --MichaelOlson
 * Exim filters
    * (a method has been set up by MichaelOlson, but it needs testing).
 * DNS server
    * Works on deleuze, although I will test once more domains have been migrated for reasonable domain defaults --JustinLeitgeb
 * nscd process for name caching
    * Currently this processes is set to do hostname caching on deleuze, so bind will not be set up as a caching name server --JustinLeitgeb
Line 99: Line 55:
= Mire = === Views ===
Line 101: Line 57:
 * Installed new second SCSI hard drive, reinstalled debian, and configured the drives with software RAID-1. --NathanKennedy
 * Configured Mire to work as a proper krb/ldap/afs client machine. --DavorOcelic
 * Fritz.hcoop.net - [[http://fritz.hcoop.net/munin/|Munin reports]]
Line 104: Line 59:
= Custom software =
Line 106: Line 60:
 * DomtoolTwo
 * Vmail tools
 * Web portal
== Specific Machines ==
This documents machine-specific (hardware) things, or specific configuration necessary for ''that machine''.

 * [[Hardware]]
 * SetupNewMachines: How to install a machine that adheres to our policies
 * KvmAccess: How to use the remove KVM and avoid going on site.
 * deleuze
   * PowerEdge2850 is about '''deleuze'''
   * RebootingDeleuze: Steps to take after rebooting deleuze.
 * mire
   * RebootingMireSp: How to reboot mire using its SP interface.
 * hopper
   * HopperServiceProcessor
 * fritz
   * FritzInfo
 * outpost
   * OutpostInfo


== Services ==
This documents all software things that are not machine specific.

=== General Sysadmin ===

 * BackupInfo: Information on how to recover deleted files from our off-site backups.
 * DebianPackaging: How to make custom HCoop Debian packages.
 * ResourceLimits
 * InstalledSoftware lists non-debian installed software.
 * SystemAuthentication lists authentication
 * UsingResourceLimits If this is still accurate, we should move it to MemberManual area.
 * Member Management
   * UserManagement only talks about adduser/deluser right now.
   * MemberFreezing: How to freeze and unfreeze members who get behind on dues
   * AdminUserSetup lists steps to create (blank), delete, and change passwords of admin users.
   * ChangingAdminPassword: How admins can change their UNIX passwords.

=== Specific Services ===
 
 * DaemonAdmin: How to set up various daemons (NOTE: many of the services below are linked from here. We should migrate the contents of this page onto the outline below.).
 * AFS / Kerberos
   * SetupNewAfsServer: How to set up a new AFS server.
   * PrincipalsForNonHumans talks about kerberos for automated tasks.
 * Mail
   * MailMan contains no information...
   * SpamAssassinAdmin
 * DomTool
 * Web
 * DNS
   * ZoneTransfers is also mostly blank.
 * Databases
 * Backups
 * VersionControlAdmin
 * wiki.hcoop.net
 * JabberAdmin
 * [[BugZilla]]
 * Other
   * CertificateAuthority: How to sign user SSL certificates and the like.


== Historical ==

Pages no longer considered relevant:

 * SoftwareArchitecturePlans: Plans for software installation.
 * SystemArchitecturePlans: Plans regarding our hardware.
 * InstallationLog contains ancient (~2005) records of installation of software and hardware
 * KrunkInfoz (Krunk is out of service)

Admin Area

Links to detailed policies, procedures and information specific to HCoop. The resources here should allow HCoop admin team members to share information about every part of the complete system, and to allow easier training of future team members.

From my experience, I would recommend longer pages, instead of dividing a topic into lots of subpages. When there are too many subpages, I've found that some will be updated, and some will fall out of date. (Of course, use your judgment here.)

Admins: it is recommended that you watch the changes RSS feed to keep informed of what everyone is up to. Then, please document all of your work on here somewhere - that way we will not only have a record, but everyone gets notified about what is going on. Alternatively, you can create a wiki account and subscribe to the page regex .* (all pages).

To be an admin

Sections you should read if you are interested in being an admin.

Admins and Admin Responsibilities

Introductory material

Refer to documentation of each of the listed components. The information in our Wiki pages covers only the most basic principles, and quickly focuses on HCoop-specific setup, assuming skillset with the technology.

Planning and Records

Technical Records

Views

Specific Machines

This documents machine-specific (hardware) things, or specific configuration necessary for that machine.

Services

This documents all software things that are not machine specific.

General Sysadmin

Specific Services

Historical

Pages no longer considered relevant:

AdminArea (last edited 2020-08-23 22:16:03 by ClintonEbadi)